Veris AA10 Installation Instructions

ENVIRONMENTAL SENSORS

INSTALLATION GUIDE

AA10

Temperature Range Conguration

NOTICE

SPECIFICATIONS

Transmitter:

Input Voltage 12 to 24VDC Loop Resistance 250 Ω, 13.5V min.; 500 Ω, 18.5V min. Output 4-20mA, 2-wire, loop powered; 1-5VDC with 250 Ω resis tor Transmitter Accuracy ±2.5% of span (typical) Adjustment ±5% zero and span Ambient Temperature 0° to 50°C (32° to 122°F) Encapsulation Epoxy encapsulated

Sensor (sold separately):

Sensor Type RTD, Platinum, 100 Ω, 0.0385α Sensor Accuracy ±0.30°C Conversion Resistor 250Ω min. ¼ watt

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classied locations.

• Read and understand the instructions before installing this product.

• Turn oﬀ all power supplying equipment before working on it.

• The installer is responsible for conformance to all applicable codes.

No responsibility is assumed by Veris Industries for any consequences arising out of the

use of this material.

PRODUCT IDENTIFICATION

AA10

Example:

AA10C3

AA10SPC013 63 AA10SPC01365 AA10SPC013 66

°C °F Order Code

-50 to 50 -58 to 122 1

0 to 50 32 to 122 2

0 to 100 32 to 212 3

10 to 35 50 to 95 4

0 to 150 32 to 302 5

-18 to 38 0 to 100 6

-18 to 121 0 to 250 7

-18 to 66 0 to 150 8

-29 to 66 -20 to 150 9

-60 to 70 -76 to 158 10

0 to 66 32 to 150 11

°C °F

-7 to 49 20 to 120

0 to 30 32 to 86

-10 to 10 14 to 50

DIMENSIONS

PRODUCT OVERVIEW

The AA10 is intended for use with a 100 Ω platinum RTD (0.0385α) to provide either a 4-20 mA or a 1-5 VDC temperature signal.

INSTALLATION

1. Disconnect power to the control panel.

2. Wire the AA10 as shown in the Wiring section. For a 1-5 VDC output, use a 250 Ω resistor (not included).

3. Refer to the Produc t Identication chart to determine the output temperature range scaling.

WIRING

Current Output

RTD

POWER SUPPLY

12 to 24 VDC

DIGITAL CONTROL

Temperature

4-20 mA return

POWER SUPPLY

12 to 24 VDC

–

Voltage Output

250Ω

–

RTD

1.5” (39mm)

1.3” (32mm) nominal

1.0” (26mm)

DIGITAL CONTROL

Temperature

1-5VDC return

–

Alta Labs, Ene rcept, Enspector, Hawk eye, Trustat, Aerospon d, Veris, and the Veris ‘V ’ logo are tradem arks or registe red trademarks o f Veris Industries, L .L.C. in the USA and/or ot her countries.