Veris 228x Datasheet

220x & 228x SERIES

Insertion Meter,
Standard Impeller

VERIS INDUSTRIES

220SS0005-1211

Ideal For Pipe Sizes 3”
To Over 40”

DESCRIPTION

Insert-style liquid ow sensors with brass or stainless steel sleeves t pipe sizes from
3” to 40” (77 to 1016 mm). These sensors can be purchased with a bronze or iron
tee. Sensor output is a frequency that indicates ow rate. Used in conjunction with a
compatible ow monitor or transmitter, these non-magnetic ow sensors provide an
accurate reading of the rate of liquid ow, as well as total accumulated ow in indoor
or protected areas.

APPLICATIONS

● Measuring liquid ow rates

● Accounting for total accumulated ow

DIMENSIONAL DRAWINGS

3”

(76 mm)

flow

2” NPT

1.5”

(38 mm)

(insertion depth)

1.75”

(45 mm)

220BR0005-1211

228CB2005-1211

FEATURES

● Six-bladed impeller design with a proprietary, non-magnetic sensing

mechanism...high accuracy and repeatability

● Forward-swept impeller is less prone to fouling by water-borne debris...reliable

performance with minimal downtime

● Signal can travel up to 2000 ft (609 m) between the sensor and the display unit

without amplication

● Supplied with 20 ft (6 m) of 2-conductor 20-AWG UL type PTLC cable (105°C

rated)

● Sensors of similar type are interchangeable...no need for recalibration after

servicing or replacement...quick install and fast maintenance

9”

(229 mm)

4.5”

Pipe I.D.

1/2 - 14 NPT

SPECIFICATIONS

Temperature Rating 105°C (221°F) continuous
Pressure Rating At 38°C (100°F) Inser t: 400 psi; brass tee: 200 psi; iron tee: 175 psi
Recommended Design Flow Range 0.5 to 30 ft/sec (0.15 to 9 m/sec); initial detection below 0.3 ft/sec
Wetted Materials UHMW-PE bearing, polyamide impeller, tungsten carbide shaft, EPDM O-rings
Accurac y 1% F.S. over recommended design ow range; ±4% of reading within calibration range*
Repeatability ±0.3% of full scale over recommended design ow r ange*
Linearit y ±0.2% of full sc ale over recommended design ow range*
Output Frequency 3.2 Hz to 200 Hz
Output Pulse Width 5 msec ±25%

Yea r

1

Warranty

5.25”

(133 mm)

7.2”

(183 mm)

* ≥10 upstr eam and ≥5 downstream st raight pipe diame ters, uninterrup ted ow.

(114 mm)

ORDERING INFORMATION

MODEL MANUF. PART # DESCRIPTION

U001-0001 220BR0005-1211 Flow, Sensor, Insert, Brass Sleeve, 3” to 40” (77 to 1016 mm) pipe

U001-0002 220SS0005-1211 Flow, Sensor, Insert, SS Sleeve, 3” to 40” (77 to 1016 mm) pipe

U001-0006 228BR2005-1211 Flow, Sensor, Insert, Bronze, 2” Bronze Tee

U001-0007 228CB2005-1211 Flow, Sensor, Insert, Bronze, 2” Iron Tee

U001-0025 228BR2505-1211 Flow, Sensor, Insert, Brass, 2.5” Bronze Tee

U001-0030 228CB2505-1211 Flow, Sensor, Insert, Brass, 2.5” Iron Tee

U001-0072 228BR2004-0211 Flow, Sensor, Insert, Brass, 2” FMCSA, Viton

800.354.8556

+1 503.598.4564

www.veris.com

HQ00 01778.B 01131