VENTS AXIAL DECORATIVE FANS User Manual
AXIAL DECORATIVE FANS
VENTS LD
Series
Axial decorative fans
for exhaust ventilation with air
capacity up to 310 m3/h
Application
Continuous or periodic exhaust ventilation
•
of bathroom, showers, kitchens and other utility
spaces.
Ventilation shaft mounting or duct connec-
•
tion.
Low to medium air ow motion for short dis-
•
tances at low air resistance.
Compatible with Ø 100, 125 and 150 mm air
•
ducts.
LDA
LDA gold
LDA chrome
LD alulak
Design
Modern design and aesthetic look.
•
The casing and the impeller are made of high-
•
quality durable ABS plastic, UV resistant.
Various decorative plates for the front panel of
•
the natural aluminum.
The intellectual impeller design makes the fan
•
eciency high and the service life long.
Protection rating IP34.
•
Motor
Reliable and low-watt electric motor.
•
Designed for continuous operation and
•
requires no maintenance.
Equipped with overheating protection.
•
Modifications and Options
LDA – the fan with a ground alumunium front
panel.
LDA gold – the fan with a gold-tinted aluminium
front panel.
LDA chrome – the fan with a mirror nish
aluminium front panel.
LD alumat – the fan with a front panel painted
silver (matt).
LD alulak – the fan with a front panel painted
silver (gloss).
LD1 – shortened branch pipe model.
LD K – fan is equipped with a backdraft
damper for back ow preventing.
LD L – the motor is equipped with ball
bearings for long service life (appr. 40
any angle. The bearings are maintenance-free and
contain enough grease for the entire operating
period.
sensor with the threshold value from 60 to 90%.
thousand hours) and fan mounting at
LD turbo – high-powered motor.
LD 12 – modication with low-voltage
motor. 12 V AC power supply.
LDT – equipped with a regulated timer
with the operating time from 2 to 30
minutes.
LDTH – equipped with a timer
with the operating time from 2
to 30 minutes and a humidity
LDV – equipped with a pull cord switch.
LDVT – equipped with a pull
cord switch and a regulated
adjustable from 2 to 30 minutes.
timer with the operating time adjustable from
2 to 30 minutes and a humidity sensor with the
operating threshold range from 60 to 90%.
timer with the operating time
LDVTH – equipped
with a pull cord
switch, regulated
Control
Manual:
The fan is controlled by a room light switch. It
•
is not included in the delivery set.
The fan is controlled by the built-in pull cord
•
switch V. Not applied in case of ceiling mounting.
Speed control is possible through a thyristor
•
speed controller (see Electrical Accessories).
Several fans may be connected to the same
controller. Speed controllers can not be connected
to the fans with T, TH, TP, VT, VTH modications.
Automatic:
By the BU-1-60 electronic control unit (see
•
Electrical Accessories). The control unit is supplied
separately.
By the T timer (the built-in turn-o delay timer
•
enables the fan operation within 2 to 30 minutes
after the fan switching o).
By the humidity sensor and the TH timer (ifthe
•
humidity level in the room exceeds the sensor
threshold adjustable value within 60-90% the fan
switches automatically on and operates until the
humidity level drops to the standard level, after
that the fan continues operating within the time
period according to the timer setting, then shuts
down).
Mounting features
The fan is mounted directly into the ventilation
•
shaft.
In case of remote location of the ventilation
•
shaft exible air ducts may be used. The air duct
is connected to the fan exhaust ange through a
clamp.
Fixed to the wall by means of screws.
•
Suitable for ceiling mounting.
•
To connect a fan with a 12 V low voltage motor
•
to 220 V/50 Hz power mains, it is necessary to
purchase a step-down transformer (e.g. the TRF
220/12-25 transformer).
114
LD alumat
Air ducts
Accessories
Grilles and hoods
VENTS. Domestic ventilation. Catalogue 6 | 012019
Backdraft
damper
Speed controllers
Clamps
Aerodynamic characteristics
Pressure, ΔP [Pa]
Air flow [m3/h]
Air flow [m3/h]
Air flow [m3/h]
VENTS100 LD
VENTS100 LD turbo
VENTS100 LD
(127-220 V/60 Hz)
VENTS100 LD 12
VENTS125 LD
VENTS125 LD turbo
VENTS125 LD
(127-220 V/60 Hz)
Pressure, ΔP [Pa]
VENTS125 LD 12
Pressure, ΔP [Pa]
VENTS150 LD
VENTS150 LD turbo
VENTS150 LD
(127-220 V/60 Hz)
VENTS150 LD 12
Technical data
Model
Frequency
[Hz]
Voltage [V]
Power
Consumption
[W]
VENTS 100 LD 50/60 220-240 14 0.085 2300 88 33 0.60
VENTS 100 LD turbo 50/60 220-240 16 0.1 2300 115 36 0.68
VENTS 100 LD
(127-220 V/60 Hz)
60
127 10 0.115
220 9 0.054
VENTS 100 LD 12 50/60 12 14 1.5 2200 77 32 0.59
VENTS 125 LD 50/60 220-240 16 0.1 2400 167 34 0.74
VENTS 125 LD turbo 50/60 220-240 24 0.105 2400 209 36 0.84
VENTS 125 LD
(127-220 V/60 Hz)
60
127 16 0.119
220 15 0.102
VENTS 125 LD 12 50/60 12 16 1.7 2300 149 33 0.72
VENTS 150 LD 50
VENTS 150 LD
(220-240 V/60 Hz)
60
220-240 24 0.13 2400 265 37 0.96
VENTS 150 LD turbo 50
VENTS 150 LD turbo
(220-240 V/60 Hz)
VENTS 150 LD
(127-220 V/60 Hz)
60
60
220-240 29 0.13 2400 310 39 1.10
127 25 0.175
220 25 0.388
Current
[A]
R.p.m.
Maximum air
ow [m3/h]
Sound Pressure
Level at 3m [dBA]
Weight
[kg]
2500 82 33 0.60
2400 172 35 0.74
2350 240 37 0.96
VENTS 150 LD 12 50 12 29 2 2300 236 36 0.92
Mounting example
Overall dimensions
Model
Ø D B H L L1
Dimensions [mm]
VENTS 100 LD 100 152 120 126 30
VENTS 100 LD1 100 152 120 111 30
VENTS 125 LD 125 177 140 135 34
VENTS 125 LD1 125 177 140 116 34
VENTS 150 LD 150 206 165 154 36
Certificates
The fans meet the applicable safety and electromagnetic compatibility standards.
VENTS. Domestic ventilation. Catalogue 6 | 012019
115
Loading...