Vello RC-LMC, RC-LMN User manual

FREEWAVE
STRYKER

LIGHTNING/MOTION TRIGGER

 

THANK YOU FOR CHOOSING VELLO

The Vello FreeWave Stryker
for Canon and Nikon is a
2-in- solution for intense
light and infrared (IR) image
triggering. In Lightning mode,
the device will trigger your
camera’s shutter release within
approximately 0. milliseconds
after a lightning burst reaches

2

the sensor, allowing you to
capture striking images of
storms or fireworks. Motion
mode sets the device to trigger
your camera once the unit
detects movement using the
IR motion sensor. This is ideal
for taking remote, candid shots
of passing humans or wildlife.

FEATURES COMPATIBLE DEVICES

• Detects lightning and IR

heat motion

Triggers your camera
approximately 0.
milliseconds after detection

• Portable

Compact and lightweight

• Easy to use

Streamlined design for
simple operation

The Vello FreeWave
Stryker transmitter comes
in a Nikon or Canon kit.
The device can also be
used with other cameras
by using the appropriate
cables. See included cable
compatibility insert.

3

PRECAUTIONS

• Please read and follow these
instructions and keep this
manual in a safe place.

• Lightning is very dangerous.
Stay in a safe place in a
storm area.

• Do not operate the unit in
the presence of flammable
gas or vapors.

4

• There are no user­serviceable parts inside the
devices. Do not attempt to
disassemble or perform any
unauthorized modification.

• Turn o the power of the
camera before inserting or
removing the transmitter.

• Clean the unit with a soft,
dry cloth.

• Keep out of reach of
children. This device
contains small parts which
may pose a choking hazard.

• Observe caution when
handling batteries. Batteries
may leak or explode if
improperly handled. Use
only the batteries listed in
this manual. Make certain
to align the battery with the
correct polarity.

• Batteries are prone
to leakage when fully
discharged. To avoid damage
to the product, be sure
to remove the batteries
when leaving the product
unattended for prolonged
periods or when no charge
remains.

• Make sure the item is
intact and that there are no
missing parts.

• Handle the unit with care.

• Do not use or leave the
devices in conditions of
extreme heat, severe cold,
or high humidity.

• Do not handle with wet
hands or immerse in or
expose to water or rain.
Failure to observe this
precaution could result in
fire or electric shock.

• Dispose of used batteries,
packaging, and old devices in
accordance to appropriate
local environmental
regulations.

• All photos are for
illustrative purposes only.

5