Vello OCS-SMI3, OCS-S3, OCS-S6, OCS-N3, OCS-S1.5 User manual
...
OFF-CAMERA
TTL FLASH CORD
USER MANUAL
INTRODUCTION
Thank you for choosing a Vello Off- Camera TTL Flash Cord. This
TTL ash cord allows you to set up a portable ash for off-camera
lighting while retaining all of the TTL ash functionality achieved in
modern digital cameras.
Off-camera lighting reduces the harsh shadows of direc t on-camera
ash and gives your photos more natural lighting. TTL (through the
lens) functions of modern cameras handle exposure calculations so
you can concentrate on composing the image. Because the light
from the ash is measured through the lens by the camera, there is
no need for exposure calculations or a separate light meter.
CAUTIONS
Switch off all devices (cameras
and ashes) before adding or
removing a ash unit.
Use caution in stretching the
coiled cord. Do not stretch
the cord to lengths where it
will cause your setup to
become unstable.
Do not attempt to modify or
disassemble the cord, shoe, or
contacts. Do not attempt to
“daisy-chain” ash cords.
This device is not waterresistant. Do not immerse in or
expose to water, rain, or snow.
Do not clean the cord with
solvents. Use a sof t, dry cloth
to clean the cord and
connections.
Do not use or leave the device
in conditions of extreme heat,
severe cold, or high humidity.
Loading...