Vello IR-P1 User manual

IR-P1

INFRARED
REMOTE
CONTROL

WIRELESS SHUTTER
ACTIVATION

USER MANUAL

Introduction

Thank you for choosing Vello.

Congratulations on the purcha se of your Vello IR-P1 infrared remote
control. This wireless remote lets you take photos and zoom in and out on
your camera from up to fifteen fee t away. The Vello IR-P1 is especially useful
for preventing camera sh ake during long ex posures and for taking
self-portraits. It can also be used to trig ger a remote came ra when shooting
events.

Precautions

Before using your Vello IR-P1 infrared remote control, ple ase read the
following safet y notice s carefully and thoroughly to ensure safe use, and to
help prevent damage to your remote control or injury to yourself or others.

• Remove the battery from this product before long-term storage in order
to prevent it from leaking corrosive liquids.

• This product is not water resistant. Keep it away from rain, snow,
humidity, and general moisture.

• Do not cle an this product w ith agents containing corrosive or flammable
substances such as paint thinner, benzene , or nail polish remover.

• Strong light and we ak batteries may adversely aect the tr ansmission of
the infrared signal.

• Dispose of used batteries properly. Never heat them or throw them into
a fire, as this can c ause the b atteries to leak corrosive liquids, generate
heat, or explode.

Overview

Shutter
Release

S

W/T

Wide-Angle/
Telephoto

(zoom out/in)

Using Your Vello IR-P1 as a Remote Trigger

The Vello IR-P1 can trig ger your camera’s shutter from up to fifteen feet
away. To use your IR-P1 as a remote trigger, turn on your camera and follow
these steps:

1. Remove the plastic sepa rator from the batter y.

2. Set up your shot and make sure your camera is in focus.

3. Set your camera for remote triggering. For mo re information about the
remote t riggering feature, consult your came ra’s manual.

4. Aim the remote at the camera’s infrared sensor and press the S bu tton to
release the shutter.

Note: With compatible ca meras aim the remote at the camer a’s infrared
sensor and press the W/T button to zoom out or in.