How it Works
Velleman
Loading...
Led Strip Special
User Manual
12 pgs4.55 Mb0

Velleman Led Strip Special User Manual

Download
LED Strip Special
DECORATIVE
l e d s t r i p s
ACCESSORIES FOR SINGLE-COLOUR LED STRIPS
2 CONNECTORS
POWER CABLE
1.64ft
CHLCON4
The technology of the LED strips is finally within everyone’s reach. They offer plenty of possibilities both
in terms of lighting and decoration. Give your home the best lighting. The LED strip has something for
everyone, as you can adjust the light intensity as well as change colours. Your creativity will know no bounds!
White
12V
5M
x10mm
16.4ft
x25/64"
Warm white RGB Blue Green Red Yellow/amber
CHLS4W CHLS4WW CHLS4RGB
CHLS4B
CHLS4G
CHLS4R CHLS4Y
POWER CABLE
1.96
"
CONDUCTOR
ACCESSORIES FOR LED STRI PS
4 CONNECTORS
POWER CABLE
1.64ft
POWER CABLE
1.96
"
CHLCON5
CHLCON6
CHLCON1
CHLCON2
12V
12V
150
LEDs
300
LEDs
5M
x10mm
type 3528
5M
x12mm
16.4ft
x25/64"
16.4ft
x15/32"
White Warm white Blue Green Red Yellow/amber
RGB-white
CHLS3W CHLS3WW
CHLS3B
CHLS3G
CHLS3R CHLS3Y
CHLS16RGBW
CONDUCTOR
CHLCON3
150
WHITE
150
RGB
type 3528
to be used with
ref. CHLS16C
24V
5M
x10mm
16.4ft
x25/64"
White Warm white RGB Blue
CHLS7W CHLS7WW CHLS7RGB
CHLS7B
CHOOSING AN LED STRIP DEPENDS ON SEVER AL FACTORS:
The degree of water protection, •
which is expressed with an IP rating.
The voltage of the LED. Generally, •
a 12V voltage is considered a safe
low voltage and therefore it is widely
used. An LED strip with a voltage of
24V has the advantage that the same
wire diameter can span a greater
distance bet ween the power supply
and your LED strip.
The choice of an LED strip also •
depends on the number of LEDs on
an LED strip. The more LEDs, the
less visible distinctive light spots and
the bet ter the light distribution. This
can be useful for indirect lighting
over a small distance between the
strip and the illuminated area, but is
unimportant with greater distances.
The overall intensity of the LED •
matters too. It is directly proportional
to the number of dies or LED chips
on an LED strip. This is not to be
mistaken for the number of LEDs. A
type 3528 LED has got 1 die per LED
and a type 5050 LED has got 3 dies
per LED. Theoretically this means a
type 5050 LED produces three times
the light a type 3528 does.
12V
24V
12V
300
LEDs
300
LEDs
600
LED
300
WARM WHITE
300
NEUTRAL
WHITE
5M
x10mm
5M
x10mm
type 3528
5M
x10mm
type 3528
type 3528
16.4ft
x25/64"
16.4ft
x25/64"
16.4ft
x25/64"
White Warm white RGB
White Warm white Blue
White & warm white
CHLS15W CHLS15WW CHLS15RGB
CHLS13W CHLS13WW
CHLS18WWWC
CHLS13B
A TYPE 3528 LED
HAS GOT 1 DIE
A TYPE 5050 LED HAS GOT 3 DIES
l e d s t r i p s f o r
LIGHTING
FLEXIBLE LED STRIP
without silicone coating
24V
5M
x10mm
16.4ft
x25/64"
White Warm white
CHLS19W
CHLS19WW
1200
LEDs
FLEXIBLE DUAL LEDSTRIP
24V
type 3528
5M
x15mm
16.4ft
x19/32"
1200
LEDs
FLEXIBELE TRIPLE LEDSTRIP
type 3528
White Warm white
White
CHLS20W
CHLS20WW
CHLS21W
12V
900
LEDs
5M
x24mm
type 3528
16.4ft
x15/16"
Warm white
CHLS21WW
WATER
PROOF
l e d s t r i p s
MOUNTING CLIPS
FOR IP68 WATER PROOF LED STRIPS
•100pieces
for: CHLS11W, CHLS11WW, CHLS11B, CHLS11RGB, CHLS22W, CHLS22WW, CHLS22RGB
HARD
FLEXIBLE
CHLCLIP1
CHLCLIP2
IP68
12V
12V
300
6 = No ingress of dust; complete protection against contact. 8 = The equipment is suitable for continuous immersion in water
under conditions of prolonged immersion.
White (9000K)
150
LEDs
LEDs
5M
x10mm
5M
x12mm
16.4ft
x25/64"
16.4ft
x15/32"
Warm white RGB Blue
White Warm white RGB
CHLS11W CHLS11WW CHLS11RGB
CHLS11B
CHLS22W CHLS22WW CHLS22RGB
END CUP
FOR CHLS11 LED STRIPS
4x: closed end cups• 4x: cup with 2 holes • for single colour strips 4x: cup with 4 holes • for RGB strips
CHLSEC
12V
'SIDE VI EW'
300
LEDs
5M
x8mm
type 335
16.4ft
x5/16"
White Warm white
CHLS9W
CHLS9WW
SPECIAL
led strips
FLEXIBLE ANIMATED RGB LED "DATA" STRI P
Animated LED strip with 3 separate controlled segments. RGB controller
with IR remote control and different animation programs. Contains 270
high brightness LEDs. Suitable for illuminated advertising and marking. Self-
adhesive. It’s possible to connect 2 strips to the same controller.
RGB
CHLS14
12V
5M
x16mm
16.4ft
x5/8"
270
LEDs
KIT WITH FLEXIBLE LED STRIP AND CONTROLLER
Supplied with remote control.
RGB
CHLS17RGB/2
12V
2M
x10mm
6.56 ft
x25/64"
60
LEDs
FLEXIBLE 1 m/3ft LED STRIP
RGB LED strip for easier installation.
MA XIMUM DISTANCE
The more LED strips you connect,
the greater the power consumption
and the greater the current.
Since the wiring in an LED strip
is very thin, it can only handle a
limited amount of current without
being damaged irreversibly.
Do not hesitate to ask your vendor
for more details, he will inform you
of the maximum length your LED
strip installation can handle.
RGB
12V
CHLS5RGB/1M
FLEXIBLE LED MODULES
12V
1M
x10mm
compatible with chls4rgb
width:
10mm
25/64"
3.28ft
x25/64"
30
LEDs
50cm/1.64ft: 15 LED
CHLS80
Corner •3LeDs
1m/3.28ft: 30 LED
CHLS82
T-shape •3LeDs
CHLS83
Connection wire
CHLS81
CHLS84
OPERATING MODULES
colour operation
12VDC
RGB LED STRIP EFFECT GENERATOR
VM146
3x3A
24VD C
3x3A
256 levels/channel
hard/smooth fade transition effects: sp eed
adjust, me mory, easy sele ct
pushbutton
RGB LED DIMMER AND COLOUR SELECTOR -
REMOTE
LED DIMMER
TO BE USED WITH VM118R
with RF REMOTE CONTROL
RGB LED EFFECT GENERATOR
REMOTE CONTROL
RGB LED DIMMER AND COLOUR SELECTOR
RGB LED DIMMER
WITH RF REMOTE
For Din rail
VM161
VM152
WITH RF
VM151
VM162
VM150
12VDC
3x3A
24VD C
3x1A
12VDC
1x6A
24VD C
1x6A
12VDC
3x3A
24VD C
3x1A
12VDC
3x3A
24VD C
3x1A
12VDC
3x5A
24VD C
3x5A
7 colour tones
1
colour
5 user-editable colour tabl es
hard/smooth fade transition effects: sp eed
adjust, me mory
7 colour tones
7 colour tones
+ single colour mode
10
positions
10
positions
selectable automatic
10
positions
19
positions
selectable
8 channel RF
VM118R
pushbutton + 2 channel RF
VM130T
(incl.)
2 channel RF
VM130T
(incl.)
2 channel RF
VM130T
(incl.)
2 pushbuttons :
possi ble to connect
2 strips to the sam e
controller
12VDC
0..10V RGB LED DIMMER
For Din rail
A dimmer is a module connected between the power supply and the single colour LED strip. It controls the light intensity from 0 to 100%. An RGB controller is a module connected between the power supply and the RGB LED strip. You can choose the desired colour and adjust the brightness of the strip. Some controllers have built-in programs that can automatically change the colours.
VM168
1x5A
24VD C
1x5A
selectable
slow / fas t response
256
positions
FOR A PROFESSIONAL
FINISH
IN INTEGRATING YOUR
LED STRIPS, YOU CAN USE OUR
RANGE OF HOME AUTOMATION.
FOR MORE I NFORMATION
VISIT WWW.VELBUS.EU
OR ASK FOR OUR BROCHURE
FROM YOUR VELBUS DEALER.
control via
touchscreen.
wireless control via
iPod, iPad, iPhone
1
colour operation
12VDC
1. RGB LED CONTROLLER
2
REMOTE CONTROL
WITH
CHLSC1
3x5A
24VD C
20 pre- programmed
output modes:
single co lours, flash, s trobe, fade…
control over
timer-/pushbutton module
(up to 8 buttons)
pushbutton + 24 button s IR
3x5A
24 button s IR
2. RGB LED CONTROLLER
REMOTE CONTROL
3
WITH
CHLSC2
12VDC
3x4A
fixed modes a nd changing effects
inten sity adjustment
24VD C
3x1A
DMX +
18 buttons IR
3. RGB+W LED CONTROLLER WITH
AND IR REMOTE
CHLS16C
DMX
12VDC
3x5A
24VD C
3x5A
4 DMX channels
red-green-blue-white
14 modes, colour
and speed selection
The following schemes show how several LED strips can be connected consecutively.
RGB POWER SLAVE MODULE
Add more led strips to your existing controller.
every unit adds up to 144W (12V) or 288W (24V)• works with a single power supply or multiple supplies• eases distribution of led strips• allows simultaneous use of 12V and 24V strips• only 4 interconnecting wires required (e.g. CHLWIRE)•
1. WITH DIMMER
2. WITH RGB CONTROLLER
3. WITH SLAVE MODULE VM169
3 X 4A
3x
4A
12/24V
23 0VA C
L1 N
15ft 15ft
12/24VDC
L1 N
12/24VDC
23 0VA C
L1
N
23 0VA C
12/24VDC
RGB
controller
RGB
controller
15ft 15ft 15ft
VM169
VM169
15ft15ft
CONSTANT VOLTAGE
Use
: suspended ceiling, wet places, etc... short circuit protection• overload protection• over voltage protection (255V)• thermal protection (80 °)• waterproof protection IP67•
SWITCHING POWER SUPPLY
Use: switchboards, inaccessible places (ventilated and dust-free).
cooling: by free air convection• with screw connections• protections: •
short circuit -
overload ­auto recovery• 100% full load burn-in test• high reliability•
USING AN LED STRIP
By default, an LED strip comes with a 1-wire connection. Under normal conditions, this is sufficient. When an LED strip is used in enclosures, LED profiles or in areas with reduced cooling, it is better to feed the LED strip via 2 connectors. The maximum current in the LED strip is then cut in half, thus ensuring lower operating temperature and a longer life.
temperature
1 connection
power
supply
15ft LED STRIP
length
SWITCHING POWER SUPPLY
-
DIN
Use: switchboards, inaccessible places (ventilated and dust-free).
with 4 screw connections• protections: •
short circuit -
overload ­auto recovery• 100% full load burn-in test• high reliability•
power
SUPPLIES
order c ode
LPS00512R
LPS01012C
LPS01012R
LPS02012R
LPS04512B
LPS04512R
LPS06012R
LPS08012R
LPS10012R
LPS10024R
LPS15024R
LPS20024R
PSIN02512
PSIN02524
PSIN04012
PSIN04024
PSIN06012
PSIN06024
PSIN10012
PSIN10024
PSIN15012
PSIN15024
PSIN30012
PSIN30024
5W 12VDC
10W 12VDC
10W 12VDC
20W 12VDC
45W 12VDC
45W 12VDC
60W 12VDC
80W 12VDC
100W 12VDC
100W 24VD C
150W 24VD C
200W 24VDC
max . 25W 12VDC
max. 25W 24VD C
max. 40W 12VDC
max. 40W 24VD C
max. 60W 12VDC
max. 60W 24VD C
max. 100W 12VDC
max. 100W 24VD C
max. 150W 12VDC
max. 150W 24VD C
max. 300W 12VDC
max. 300W 24VD C
order c ode
PSIN03012D
PSIN03024D
PSIN06012D
PSIN06024D
max. 30W 12VDC
max. 30W 24VD C
max. 60W 12VDC
max. 60W 24VD C
6.30 x 1.18
x 25/32 inch
ø2.28
x 15/16 inch
6.30 x 1.18
x 25/32 inch
6.30 x 1.18
x 25/32 inch
10.12 x 1.42
x 29/32 inch
10.12 x 1.42
x 29/32 inch
6.18 x 2.64
x 1.97 inch
9.45 x 2.64
x 1.97 inch
9.45 x 2.64
x 1.97 inch
9.45 x 2.64
x 1.97 inch
8.98 x 4.72
x 2.52 inch
8.98 x 4.72
x 2.52 inch
3.94 x 3.82
x 1.38 inch
3.94 x 3.82
x 1.38 inch
3.94 x 3.82
x 1.46 inch
3.94 x 3.82
x 1.46 inch
3.94 x 3.82
x 1.38 inch
3.94 x 3.82
x 1.38 inch
3.94 x 3.82
x 1.38 inch
3.94 x 3.82
x 1.46 inch
3.94 x 4.33
x 1.97 inch
3.94 x 4.33
x 1.97 inch
3.94 x 4.49
x 1.93 inch
3.94 x 4.49
x 1.93 inch
temperature
2 connections
15ft LED STRIP
power supply
length
USING THE PROPER POWER SUPPLY
The operating voltage of the power supply has to match the indicated supply voltage of the LED strip (12 of 24V). It is • important that the output voltage of the power supply does not exceed the indicated voltage of the LED strip. The used power supply rating must be higher than the total consumption of all LED strips. In the summary table at the back you can find the consumption of each LED strip per meter. You only need to multiply the used power by the total length of the strip to calculate the total consumption (without exceeding the maximum distance). RGB dimmers and controllers are also limited by a maximum current beyond which they can be damaged. So make sure the • power you use to feed the LED strip never exceeds the permitted current of the dimmer or RGB controller.
AlUMiNiUM led
PROFILES
high-quality anodized aluminium profile •
for LED strips
the aluminium profile will provide •
mechanical and thermal protection for the LEDs frosted diffuser for optimal light distribution and to • cover the LED strips for indoor use only•
6.56ft•
UV RESISTANT
W: 11/16
"
H: 19/32
"
31/64"
MOUNTING BRACKET
CHLAP1
END CUP
CHLAPB1
CHLAPC1
BUILT-IN TYPE
recessed profile: to build into e.g. MDF, plaster...• UV-resistant•
•
6.56ft
9/64 "
W: 31/32
H: 19/32
31/64"
11/ 16 "
45º •
6.56ft
corner profile: to mount LED strips at an 45° inclination angle• UV-resistant•
W/H : 21/32
"
31/64"
45º CORNER•
corner profile: to mount LED strips in a corner•
• UV-resistant
6.56ft
W: 1.21
31/64"
CLEAR DIFFUSER
for CHLAP1, CHLAP2, CHLAP3, CHLAP4
•6.56ft
"
"
90º
5/16 "
"
17/3 2 "
45º
CHLAP2
CHLAP3
CHLAP4
CHLAPD
END CUP
MOUNTING BRACKET
END CUP
MOUNTING BRACKET
END CUP
CHLAPC2
CHLAPB3
CHLAPC3
CHLAPB4
CHLAPC4
ROUND•
6.56ft
round profile: to • use as light fixture
121º
ø: 15/16
"
31/64"
13/64"
WALL LIGHTNING ARM
MOUNTING BRACKET
CHLAP5
CHLAPB5L
END CUP
WALL ARM
CHLAPB5
CHLAPC5
CHLAPB5W
SUPPORT ARM
CHLAPB5S
SUMMARY
led
number
type
of leds
IP61
IP61
IP61
IP61
IP61
IP61
IP61
IP51
IP61
IP51
IP68
IP68
IP68
IP61
IP61
IP61
5m x 10mm
16.4ft x 25/64"
5m x 10mm
16.4ft x 25/64"
5m x 12mm
16.4ft x 15/32"
5m x 10mm
16.4ft x 25/64"
5m x 10mm
16.4ft x 25/64"
5m x 10mm
16.4ft x 25/64"
5m x 10mm
16.4ft x 25/64"
5m x 10mm
16.4ft x 25/64"
5m x 15mm
16.4ft x 19/32"
5m x 24mm
16.4ft x 15/16"
5m x 10mm
16.4ft x 25/64"
5m x 12mm
16.4ft x 15/32"
5m x 8mm
16.4ft x 5/16"
5m x 16mm
16.4ft x 5/8"
2m x 10mm
6.56ft x 25/64"
1m x 10mm
3.28ft x 25/64"
0.5m x 10mm
1.64ft x 25/64"
1m x 10mm
3.28ft x 25/64"
6cm x 10mm
0.2ft x 25/64"
10.5cm
x 10mm
0.34ft x 25 /64"
type 5 050
type 3528
5050+3528
type 5 050
type 5 050
type 3528
type 3528
type 3528
type 3528
type 3528
type 5 050
type 5 050
type 3 35
type 5 050
type 5 050
type 5 050
type 5 050
300
2x150
300
300
600
120/ m
2x300
120/ m
1200
240 /m
1200
240 /m
900
180 /m
300
300
270
= 30/m
150
30/m
60/m
30/m
60/m
60/m
150
30/m
60/m
60/m
54/m
60
30/m
30
30/m
15
30/m
30
3
3
3 LEDs
= 10cm /3.94 "
3 LEDs
= 5c m/ 1.97"
6 LEDs
= 10cm /3.94 "
6 LEDs
= 10cm /3.94 "
3 LEDs
= 5c m/ 1.97"
6 LEDs
= 5c m/ 1.97"
6 LEDs
= 5c m/ 1.97"
6 LEDs
= 5c m/ 1.97"
12 LEDs
= 5c m/ 1.97"
9 LEDs
= 5c m/ 1.97"
3 LEDs
= 10cm /3.94 "
3 LEDs
= 5c m/ 1.97"
3 LEDs
= 5c m/ 1.97"
3 LEDs
= 10cm /3.94 "
3 LEDs
= 10cm /3.94 "
33 mm
1.3"
16.5 mm 21/32 "
16.5 mm 21/32 "
16.5 mm 21/32 "
16.5 mm 21/32 "
8.3 mm 21/64 "
8.3 mm 21/64 "
4.2 mm 11/6 4"
8.4 mm 21/64 "
16.7 mm 21/32 "
33 mm
1.3"
16.7 mm 21/32 "
16.5 mm 21/32 "
18 mm
45/6 4"
33 mm
1.3"
33 mm
1.3"
33 mm
1.3"
/m /m
0.32A 3.9W
0.34A 4.1W
0.5A 5.9W
0.36A 3.9W
12V
0.34A 4.1W
0.42A 5W
0.42A 5.1W
0.3A 3.6W
0.3A 3.6W
0.3A 3.6W
12V
0.28A 3.4W
0.34A 4.1W
0.32A 3.9W
12V 0.8A 9.6 W
0.42A 10.6W
0.42A 10.6W
24V
0.56A 13W
0.44 A 11W
0.84A 10.6W
12V
0.84A 10.6W
0.66A 8.6W
0.34A 8W
24V
0.34A 8W
0.32A 7. 8W
12V 0.34A 2 x 3.6W
0.84A 20W
24V
0.84A 20W
0.84A 20W
24V
0.84A 20W
1.16A 14 W
12V
1.16A 14 W
0.32A 3,9W
0.34A 4.1W
12V
0.5A 7. 2W
0.32A 3.9W
1.2 A 15 W
12V
1.2 A 15 W
1.2 A 15 W
0.36A 4,4W
12V
0.36A 4,4W
12V 0.8A 9W
12V 0.550A 6.25W
12V 0.525A 7. 4W
0.5A 6W
0.5A 6W
12V
0.933A 11.3 W
0.933A 11.3 W
colour order code
CHLS4W:
white
CHLS4WW:
CHLS4RGB:
CHLS4B:
CHLS4G:
CHLS4R:
CHLS4Y:
CHLS3W:
CHLS3WW:
CHLS3B:
CHLS3G:
CHLS3R:
CHLS3Y:
CHLS16RGBW:
CHLS7W:
CHLS7WW:
CHLS7RGB:
CHLS7B:
CHLS15W:
CHLS15WW:
CHLS15RGB:
CHLS13W:
CHLS13WW:
CHLS13B:
CHLS18WWWC:
CHLS19W:
CHLS19WW:
CHLS20W:
CHLS20WW:
CHLS21W:
CHLS21WW:
CHLS11W:
CHLS11WW:
CHLS11RGB:
CHLS11B:
CHLS22W:
CHLS22WW:
CHLS22RGB:
CHLS9W:
CHLS9WW:
CHLS14:
CHLS17RGB/2:
CHLS5RGB/1M:
CHLS80:
CHLS81:
CHLS82:
CHLS83:
warm whi te
RGB
blue
green
red
yellow/amber
white
warm whi te
blue
green
red
yellow/amber
RGB-white
white
warm whi te
RGB
blue
white
warm whi te
RGB
white
warm whi te
blue
white & warm whi te
white
warm whi te
white
warm whi te
white
warm whi te
white (90 00K)
warm whi te
RGB
blue
white
warm whi te
RGB
white
warm whi te
RGB
RGB
RGB
RGB, 50cm
RGB, 1m
RGB, corner
RGB, T-shape
decorAtive led strips
led strips for
lightiNg
wAter proof led strips
speciAl led strips
your order and deliver goods as soon as possible. Copyright Velleman NV.
Valid until 03.09.2011. Printing and typesetting errors reserved. All photos and text are subject to change without notice. Please do not throw away. Delivery while stocks last.
The articles are ordered in sufficient quantity. If during this action items are no longer available from your retailer or they can’t be delivered in time, your retailer will take
PROMO1105EN/LED
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use