Velleman KSR8 User Manual [en, de, es, fr]

KSR8 – “TITAN TANK” KIT

1. Introduction & Features

To all residents of the European Union
Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised

company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for buying the KSR8! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.

The KSR8 requires 4 x 1.5V AAA batteries (not incl.); the remote control requires 4 x 1.5V AA batteries (not incl.).
Apart from the batteries, you will also need a pair of long-nose pliers, a diagonal cutter and a screwdriver.

2. Remote Control

a. Introduction

This is a 4-channel IR remote control used to control one KSR8. Put up to 4 KSR8’s into battle by choosing a
different channel for each tank.

b. Parts List

P1 Battery terminal #1 x 2 P2 Battery terminal #2 x 2 P3 Battery terminal #3 x 2

P4 Tapping screw (2.3 x 7mm) x 4 P6 Finished PCB

P5 Tapping screw (2.6 x 7mm) x 4

KSR8 - 1 - VELLEMAN

c. Assembly

3. The Tank

a. Introduction

Control the tank by means of the remote control. Select a different channel for each tank (max. 4 tanks) when playing
against each other.

KSR8 - 2 - VELLEMAN

b. Parts List

P1 Motor x 2 P2 Motor holder x 2 P3 Screw (2 x 10mm) x 4

P4 Nut (M2) x 4 P5 Tapping screw (3 x 7mm) x 28 P6 Eyelet x 6

P7 Gear (44T+0) with shaft

(green) x 2

P8 Gear (44T+0) with shaft

(orange) x 4

P9 Pinion gear 8T (white) x 2

P10 Gear 44/18T (blue) x 4 P11 Gear 48/18T (white) x 2 P12 Clear tube x 2

P13 Battery holder x 1 P14 Hex post x 4 P15 Tapping screw (3 x 6mm) x 2

P16 Tapping screw (3 x 5mm) x 6 P17 Tapping screw (3 x 22mm) x 1 P18 Nylon nut (M3) x 1

P19 PCB x 1 P20 IR transmitting module x 1 P21 Buzzer x 1

P22 Sponge x 1 P24 Sticker x 6

P23 Black PVC holder x 1

KSR8 - 3 - VELLEMAN

c. Assembly

KSR8 - 4 - VELLEMAN

4. Decoration (fig. 1)

KSR8 - 5 - VELLEMAN