Velleman C.Scope CS770 Operating Manual

CS770

Professional metal detector

Operating manual

Gebruikers handleiding

Manuel de l’Utilisation

CS-770 METAL DETECTOR
INTRODUCTION

You are now the owner of a CS-770 metal detector. These detectors are recognised as one of the
finest metal detectors available. The are designed and manufactured to the highest standard to give
you the maximum enjoyment and success. In order to obtain the best results it is IMPORTANT that
you read and follow these instructions.

CONTROLS AND FEATURES

A - On/Off Tune Control
B - Discriminate Level Control
C - Auto Tune Button
D - Meter
E - Battery Check
F - Battery Compartment
G - Battery Compartment
I - Search Head

Diagram 1

CS-770 GB

1

ASSEMBLY AND BATTERIES

Your CS-770 comes to you broken down for packaging. To assemble, insert the thickest pipe with
drilled holes into control box underside and secure with the 2 bolts provided, slacken the knurled
locking collar on the top stem and insert the middle stem.

Insert the lower stem in the middle stem and tighten locking collar. Twist the head cable around the
stems until the slack is taken up, then connect the head to the lower stem using the bolt provided.

Height adjustment can be achieved by slackening off the knurled locking collars and extending or
shortening the whole assembly.

BATTERIES

Before you can operate your CS-770 you need to purchase 4 x PP3 batteries, preferably by a well
known manufacturer.

N.B. Over 80% of all faults occurring with metal detectors can be traced to poorly fitted or faulty

batteries - even new ones !

By removing battery covers (F and G) access is gained to the battery compartments. To remove
battery covers gently depress ribbed and slide forward. Connect batteries firmly onto battery clips
and replace battery covers.

Battery life will be longer if headphones are used.

Diagram 2

CS-770 GB

2