3D DNR(Digital Noise Reduction)
Sens-Up Function(x512)
■
Eclipse Function
■
Zero Defect
■
■
Day & Night (ICR-Optional)
Motion Detection
■
Back Light Compensation
■
RS485 / PELCO-D
■
Privacy Mask(Polygonal,8 Colors)
■
■
O.S.D menu function
960H/ES 004
Precaution
Do not Keep the camera face to
strong light directly
Do not install the camera in
extreme temperature conditions.
Do not disassemble the camera
even if troubles happened
To avoid malfunctions, never
use the camera close to a gas
or oil leak
Do not drop the camera or
subject them to physical shocks.
Do not expose the camera to
rain or spill beverage on it.
Do not install the camera under
unstable lighting conditions
Do not install or use the camera
in an environment where the
humidity is high
1. Features
WDR(Wide Dynamic Range)
Delivers a powerful Wide Dynamic Range to the camera which provides superior
images, internally and externally, even under extreme light and dark contracts.
It automatically compensates the necessary light levels to get detailed information
in the dark part of the image without saturation from the bright part. It enables the
WDR function to be very efficient, using a normal CCD, by using a Dual Shutter
(long & short shutter) algorithm, a specialised AE (Auto Exposure) and intelligent
image processing.
700 TVL ULTRA HIGH RESOLUTION
The horizontal resolution of 700 TV Lines with 1/3”960H IT CCD. It gives a vivid
image output with super high horizontal resolution using our own De-Mosaic
Interpolation algorithm and a specialised built-in sharpness filter.
3D DNR(Digital Noise Reduction)
Achieves excellent 3D-DNR (3-Dimensional Digital Noise Reduction) function
using upgraded 3D filtering. This function is automatically enabled when the
camera is being used and provides clear and superior images in very low light
luminance. Normally video noise increases in low light conditions, while the gain
level of the amplifier increases. It compensates for the dynamic noise using the
inactive information of a normal frame
ZERO DEFECT
Adaptive Defect Correction delivers clear picture capture in very low light luminance
using two algorithms for defect pixel compensation.
Sens-Up(x512, DSS)
Achieves high quality pictures by supporting a long exposure time - more than
1/50second - and enables recognition of the shape and color of a suspended
object under no light conditions - in cases where exposure time is greater than
8 seconds (x512).
POLYGONAL PRIVACY MASKING(Polygonal, 8colors)
Ensures privacy protection for private and specific areas on the video signal
output using a polygonal masking function. It allows the size and position of the
masking areas to be controlled very easily, and there are 8 mask areas which are
user programmable - color, brightness and mosaic.
ECLIPSE
Enables the recognition of a visible car license plate by blocking unwanted light
sources.
HIGH SENSITIVITY TRUE DAY&NIGHT
The Day & Night function delivers high quality color rendition and converts
automatically into monochrome as luminance levels drop.
2. Components
Plastic Dome Camera
A Type(OSD Board)
Plastic Dome Camera
Option
RS-485
Terminal Block
DOME COVER OPENER
③
SCREW
WDR / 3D DNR
DOME CAMERA
USER’S MANUAL
WDR/3D DNR
Zero Defect
High Resolution of 600 TV Lines
Sens Up(x512, DSS)
DIS(Digital Image Stabilization)
Polygonal Privacy Masking
D.Zoom(x1~x10)
Eclipse
High Sensitivity Day&Night
WDR/3D DNR DOME CAMERA
MANUAL
①
144(DIMESION:Ø) X 103(H)mm
⑥
②
① Base
② Dome Cover Ring
③ Dome
④ Focus Handle
Used to provide for accurate of an object within the
lens field of view
⑤ Zoom Handle
Used to adjustzoom magnification by turning
⑥ OSD Board
A Type(OSD Board)B Type(OSD Board)
UP
LEFT
DOWN
ENTER
RIGHT
Service Video
DOWN
LEFT
ENTER
UP
RIGHT
C Type(OSD Board)
DOWN
LEFT
ENTER
RIGHT
Used to connect it with external viewer as follows.
UP
4. Installation & Connection
Plastic Dome Camera
Wall
Note :
* Rubber pad(gasket) should be sticked to above base in installation
place.
* Wall mounting backet and other instruments should be used
with dome camera if the installation condition is not appropriate
to cover the whole dome base.
DC Power Connecting
DVR
AC Power Connecting
DVR
Power
(Adaptor Plug)
(Option)
RS485 +
PORT2
TX
Video Cable
(Option)
RS485 +
PORT2
TX
+_+_+_+
Video Cable
RS485 -
PORT1
RX TX RX
_
+_+_+_+
AC24V + (RED)
AC24V - (BLACK)
RS485 -
PORT1
RX TX RX
_
Adaptor
Monitor
Adaptor
Monitor
5. Setup Menu Flow
EXPOSURE LENS DC, ELC
E.SHUTTER AUTO, 1/50,1/60(NTSC),
1/100,000
BLC ON<1~255>, OFF
WDR OFF
ON
WDR LEVEL<0~20>
WEIGHT<0~20>
AGC OFF,LOW,MID,HIGH
SENS-UP
RETURN
COLOR WB MODE AWC, ATW, MANUAL, PUSH
R-Y GAIN
B-Y GAIN
RETURN
DAY&NIGHT D&N MODE AUTO, DAY, NIGHT, EXT LEAD TIME <1, 5, 30, 60> BURST ON, OFF
RETURN
FUNCTION MIRROR ON, OFF
SHARPNESS <0~40>
GAMMA 0.45, 0.6, 1.0
NEGA OFF, ON
3D DNR OFF, LOW, MID, HIGH
ECLIPSE OFF
ON
HI-INV -ON/OFF
RETURN
MOTION
SET WINDOWS
ALL SET
ALL CLEAR
SENSITIV
SHOW OFF, ICON, TRACE
DELAY TIME <1~15>
RETURN
ALARM OFF, ON
AUTO, OFF, MANUAL (x512 ~ x2)
SET LEVEL-LOW/MIDDLE/HIGH
PRIVACY MASK1 OFF
ON
SETWINDOWS
COLOR SET<1~8>
MASK8 OFF
ON
SET WINDOWS
COLOR SET<1~8>
RETURN
SYNC SYNC MODE AUTO, INTER V-PHASE <0~199>
RETURN
COMMUNICATION
BAUDRATE OFF, 2400~38400 PROTOCOL PELCO-D
RETURN
SPECIAL
TITLE OFF
ON
EDIT
RESET
POSITION
LANGUAGE ENG
DPC AUTO,OFF
RETURN
EXIT SAVE&EXIT
FACTORY SET
EXIT
RETURN
ADDRESS <0~255>
6. Special Features
1. WDR(Wide Dynamic Range)
Wide Dynamic Range is essential for capturing the images at all
light levels.
EXPOSURE
LENS DC
E.SHUTTER 1/60
BLC ON
WDR ON
AGC HIGH
SENS-UP MANUAL
RETURN
WDR
WDR LEVEL 11
WEIGHT 10
RETURN
1) WDR LEVEL :
You can set the WDR(Entry) LEVEL on the entry timing for this function.
You have to set the level into low number if you need a WDR function just
in more strong light.
On the contrary you have to set the level into high number if you need a
WDR function just in normal conditions(or low light) without strong lights as
like sunshine.
0 2 4 6 8 10 12 14 16 18 20
WDR Entry Level
(Day Time)
(0~20)
Strong Sunshine Light
(Day Time)
※Eclipse mode should be Off while you use WDR function.
(Eclipse is just a special WDR function for car license plate)
Middle Light
(Day Time)
Low Light
(Day Time)
2) WEIGHT : This is a level to make the dark area more bright.
Low number for more dark condition and high number for
more brightness condition.
2. 3D DNR(Digital Noise Reduction)
Select 3D DNR ON or OFF.
3D-DNR function reduce the background noise in a low luminance
environment. Upgraded 3D filtering ensures even more clear image.
[DNR Level High : Picture image is more clear but Ghost is more increased.
DNR Level Low : Picture image is not clear but less Ghost.]
MAIN MENU
EXPOSURE
COLOR
DAY & NIGHT
FUNCTION
MOTION
PRIVACY MASK
SYNC
COMMUNICATION
SPECIAL
EXIT
FUNCTION
MIRROR
SHARPNESS <0~40>
GAMMA 0.45
NEGA ON/OFF
3D DNR MIDDLE
ECLIPSE OFF
RETURN
ON/OFF
3. ECLIPSE
If there is a highlight within a limited environment such as car park,
It makes it possible to review vehicle license plates by removing the
highlight.
[Only used for car license plate in low light condition and the WDR
in OSD menu should be Off mode while Eclipse work as On mode]
MAIN MENU
EXPOSURE
COLOR
DAY & NIGHT
FUNCTION
MOTION
PRIVACY MASK
SYNC
COMMUNICATION
SPECIAL
EXIT
FUNCTION
MIRROR
SHARPNESS <0~40>
GAMMA 0.45
NEGA ON/OFF
3D DNR MIDDLE
ECLIPSE OFF
RETURN
ON/OFF
7. SPECIFICATIONS
TV System
S
ensor
Total Pixel
Eective Pixel
Synchronization Internal
Scanning System
Horizontal Resolution
Min. Illumination
Video Output
γ Correction
S/N
O.S.D
Electrical Shutter
Privacy Masking
Day & Night
Motion Detection
Sens-Up(Low Shutter)
SYNC
White Balance
WDR
WDR Level
3D-DNR
MIRROR
NEGA
ECLIPSE
AGC
Line Lock
Sens-Up On
NTSC PAL
1/3” 960H IT CCD
1020(H) X 508(V)1020(H) X 596(V)
976(H) X 494(V)976(H) X 582(V)