Veilux VRHD-8-4SDI User Manual

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide

www.Veilux.net

1

FCC Compliance Statement
Model Name: VRHD-8-4SDI
This device complies with Part 15 of the FCC Rules. Operation is Subject to the following two conductions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operations.

 WARNING

 Unauthorized reproduction of all or part of this manual is strictly prohibited.
 The figures in this manual are for illustration purposes only (may differ from the actual product).
 The specifications and design of the product are subject to change without prior notice for purposes of

quality improvement.

 CAUTIONS
To get the best use out of the product, be sure to read the cautions before using the product. For safety, please
take note of the following.

Instructions before using the product

1 To prevent electric shock when installing, moving, or opening the DVR and peripheral devices, connect

and disconnect the cables as instructed. All cables must be connected to grounded power outlets.
2 If the product is installed near a power outlet, make sure it can be unplugged easily.
3 Do not use the DVR in water or in wet places.
4 Keep the plastic packing materials used for the DVR or other peripheral devices out of reach of children

(may cause suffocation).

Installation Environment of the DVR

1 Maintain the following conditions: operating temperature of 5˚C ~ 40˚C; operating humidity of 10% ~ 80%.
2 Install the DVR in a safe place that is free from external vibration.
3 Install the DVR in a well-ventilated place.
4 To protect the hard disk from data loss and breakdown, install the DVR away from magnetic materials.
5 When using a rack other than the standard one, use a separate table with sufficient spacing, i.e., 60cm

from the floor, 50cm from the ceiling, and 20cm from the side and back walls and other objects.

Safety Notes on the DVR

1 When installing additional boards and HDD, separate the power cable and turn OFF power supplied to the

DVR completely..
2 Keep the product away from heat-generating devices such as heaters.
3 Do not use a damaged power cord.
4 To prevent problems due to magnetic interference and electric surge, use only grounded cables and

power outlets.
5 If the power cord is connected, do not touch the power unit. If the power cord is connected, electric current

is still flowing internally even after the switch is turned OFF.
6 Do not place a heavy object on top of the product.
7 Do not drop a conductive object in the ventilation holes.
8 Allot sufficient space for system cabling.
9 Use only the parts indicated in the manual. Do not disassemble, repair, or modify the product without

permission.
10 Incorrect system setup may cause malfunction.
11 Shut down the system normally as instructed in the manual.

Safety Notes on the Lithium Battery

1 Replace lithium batteries as instructed to avoid danger.
2 Dispose used lithium batteries properly.

【Warnings and Cautions are indicated as follows】

Possible injury or product damage

Risk of minor injury or product damage

Cautions for the usage of the product

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide

www.Veilux.net

2

Information for the usage of the product

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide

www.Veilux.net

3

CONTENTS

CONTENTS

Chapture 1. Introduction

１-２Veilux VRHD-8-SDI series Major Features

............................................................

6

１-３ About the

Product...........................................................................................

7

１-５

Components ..................................................................................................

7

Chapter 2. Installation and Connection........................................................ 8

１-７

Veilux VRHD-8-SDI

Series Front

Pan..................................................................

8

１-７-１Veilux VRHD-8-SDI Series Front Panel .................................................................. 8

１-７-３

Veilux VRHD-8-SDI

Channel Rear Panel............................................................... 8

１-８ Installation and

Connection ..............................................................................

9

１-８-１ Basic Connection ................................................................................................ 10

１-８-２ Connection of Other Devices ................................................................................. 10

Chapter 3. Operation and Setup Tools ....................................................... 11

１-９-１Veilux VRHD-8-SDI series Front Panel Button ........................................................ 11

１-９-２

Veilux VRHD-8-SDI

series Remote Controller ....................................................... 13

１-９-３ Mouse .............................................................................................................. 13

Chapter 4. DVR Operation Setup .............................................................. 13

１-１１Veilux VRHD-8-SDI Series Storage

Installation ................................................

13

１-１２ Power

ON. ................................................................................................

15

１-１３ Storage

Setup ...........................................................................................

15

１-１４ Recording

Setup........................................................................................

15

１-１５ Date/Time Setup

.......................................................................................

16

Chapter 5. System Operation................................................................... 16

１-１６ Starting System and Exiting the System

........................................................

16

１-１７

Monitoring ................................................................................................

16

１-１７-１ Screen Division and Auto Sequence .................................................................... 16

１-１７-２ Zoom (x16) ................................................................................................... 16

１-１８ System

Login ............................................................................................

17

１-１８-１ User Account and Authorization .......................................................................... 17

１-１８-２ Login ............................................................................................................. 17

１-１８-３ Logout ........................................................................................................... 17

１-１９ System Information View and Display Setup

Change .......................................

18

１-２０ System

Information ................................................................................... .

19

１-２１ Display

Setup ............................................................................................

20

１-２２ Audio, Relay, Spot control

..........................................................................

20

１-２３ Search

.....................................................................................................

21

１-２３-１ Calendar Search.............................................................................................. 22

１-２３-２ Time Index ..................................................................................................... 22

１-２３-３ List All ........................................................................................................... 22

１-２４ Log

Viewer................................................................................................

23

１-２５ Playback

..................................................................................................

24

１-２５-１ Playback status and Playback Speed Control ........................................................ 24

１-２５-２ Smart Search .................................................................................................. 25

１-２５-３ MULTI TIME ................................................................................................... 25

１-２５-４ MULTI DAY .................................................................................................... 25

１-２５-５ Event............................................................................................................. 25

１-２５-６ Panorama Playback ......................................................................................... 25

１-２６ Backup

....................................................................................................

25

１-２７

Snapshot ..................................................................................................

26

１-２８ Log Backup

..............................................................................................

26

１-２９ Setup Backup

...........................................................................................

26

１-３０ PTZ Camera

Control...................................................................................

27

Chapter 6. Setup ................................................................................... 28

１-３１ Time

........................................................................................................

28

１-３２

Definition................................................................................................. .

29

１-３２-１ Camera.......................................................................................................... 29

１-３２-２ PTZ............................................................................................................... 29

１-３２-３ Event Source .................................................................................................. 29

１-３２-４ Relay............................................................................................................. 29

１-３３

Action ......................................................................................................

29

１-３３-１ schedule (schedule1 - schedule4) ....................................................................... 30

１-３３-２ Event............................................................................................................. 30

１-３３-３ Recording....................................................................................................... 30

１-３３-４ Alarm ............................................................................................................ 30

１-３３-５ Duration ......................................................................................................... 30

１-３３-６ Log ............................................................................................................... 31

１-３４

Schedule ..................................................................................................

31

１-３４-１ Holiday setup .................................................................................................. 31

１-３５

Storage ....................................................................................................

32

１-３５-１ Max. Recording Days........................................................................................ 32

１-３５-２ HDD Overwrite ................................................................................................ 32

１-３５-３ Local Storage Management ............................................................................... 32

１-３６

Network....................................................................................................

34

１-３６-１ Ethernet ......................................................................................................... 34

１-３６-２ DDNS............................................................................................................ 34

１-３６-３ Port............................................................................................................... 34

１-３６-４ E-mail............................................................................................................ 34

１-３６-５ Bandwidth ...................................................................................................... 34

１-３６-６ Callback......................................................................................................... 34

１-３７

System .....................................................................................................

35

A/P/P/E/N/D/I/X ..................................................................................... 36

4 Veilux VRHD-8-4SDI Operating Instruction & User’s Guide

www.Veilux.net

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide

www.Veilux.net

5

(1) Recommended HDD

...........................................................................................

36

(2) Recommended PTZ Camera

Protocol.

....................................................................

36

(3) Recommended USB2.0 Device

.............................................................................

36

Figure List

[Figure 2-1.

Veilux VRHD-8-SDI

Basic Connection and Device Connections…………………......... 9

[Figure 2-2.

Veilux VRHD-8-SDI

Basic Connection and Device Connection] ...................... 9

[Figure 2-3. Terminal Block Description]................................................................................ 11

[Figure 4-4. Menu Window] ................................................................................................ 15

[Figure 4-5. Storage Device New Tab menu].......................................................................... 15

[Figure 5-6. Recording Status Window]................................................................................. 18

[Figure 5-7. DVR Infomation] .............................................................................................. 19

[Figure5-8. Search Window] ............................................................................................... 22

[Figure 5-9. Log Viewer] .................................................................................................... 23

[Figure 5-10. Playback Screen] ........................................................................................... 24

[Figure 5-11. Playback Status and Control bar] ...................................................................... 24

[Figure 5-12. Backup]........................................................................................................ 25

[Figure 6-13. Date and Time Window] .................................................................................. 28

[Figure 6-14. Definition Window].......................................................................................... 29

[Figure 6-15. Action Window].............................................................................................. 30

[Figure 6-16. Pre/post alarm] .............................................................................................. 31

[Figure 6-17. Schedule Window].......................................................................................... 31

[Figure 6-18. Storage Window]............................................................................................ 32

[Figure 6-19. Ethernet Window]........................................................................................... 34

[Figure 6-20. System Setup Window] ................................................................................... 35

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide

www.Veilux.net

6

１-１SH2 series Major Features

VRHD-8-4SDI

System

Reliable Standalone DVR

Channel type

4 BNC - HD-SDI

4 BNC - SD Analog

OS

Embedded Linux - Built in Flash Memory

Video Input

8 BNC

Video
output

Monitor

1 VGA, 1 HDMI, 1 BNC TV OUT

Spot

1 BNC

Audio Input

Line Input : 4 RCA

Audio Output

Line Output : 1 RCA

Compression Format

[Video: Standard H.264)] / [Audio: G.711]

Recording Speed

Max. 45fps@720p

Recording Resolution

Max. 720p

Recording Mode

Automatic, Continuous, Manual, Events(Sensor and Motion, Sound)/Schedule

Recording

Storage

Internal

[Internal: Max. 2HDD, Max. 4TB]

External

1 eSATA

Video Output
Resolution

HDMI : Full HD(1080p), HD(1080i), WSXGA,SXGA
VGA : WSXGA (1680x1050), SXGA(1280 x 1024),

TV : SDTV(720 x 480/576)

Sensor Input

4 Sensors

Relay/TTL Output

[1ea NC/NO]

Backup & Copy
Access

USB2.0, Network

Network Access

Various Network Interface

(Ethernet 10/100/1000, ADSL, Cable modem)

PTZ Access

2ea of RS485

System Operation &
Adjustment

Front Button, Mouse, IR Remote Controller, Keyboard Controller, Network

System Upgrade

USB2.0 Memory Stick, Network

Network

System Automation (Controlled by VMS)

NTP Supported

VMS / WEB Brower / PDA / Smart Phone

Others

18Languages Supported, Automatic E-mail

Power [12V/5A] / Max. Power Consumption[40W] / Operating Temperature [5 ~

40℃]

Weight without HDD [3kg] / Dimension [340 ⅹ 58 ⅹ 300mm]

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide

www.Veilux.net

7

１-２ About the Product

As a digital image monitoring equipment that can display images inputted from up to 8 cameras, VRHD-8-4SDI
digitally records high-quality images using various video recording modes and displays them as clean quality
images.
For users’ convenience, front panel button, remote controller, and mouse are provided. Powerful network
functions including remote monitoring and remote system setup modification are also supported.

１-３ Differences between MH2/SH2 series

VRHD-8SDI

DVD

NO

Front Button

14 Buttons

USB port

Right side of the front panel

Dimension

COMPACT SIZE

１-４ Components

Please check the components after unpacking the product.

- Remote controller

- CD (CMS, CMS Manual, PDA Viewer Software)

- AAA 1.5V Batteries 2es

- Adapter (12VDC/ 5A)

- User Manual

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide

www.Veilux.net

8

Chapter 2. Installation and Connection

１-５ VRHD-8-4SDI Front

Panel

SH2 series has the buttons which is simple and easy and the various interfaces on the rear panel.

１-５-１ VRHD-8-4SDI Front Panel

１-５-２ VRHD-8-4SDI Channel Rear Panel

No.

Name

Function

Type

1

DC-IN Power

100~240V, 50/60 Hz, 3.5A

2

CONFIGURE

Select the type of video input and output

Switch

3

RS485
DIO

PTZ Camera Control Connection
Sensor/ Relay Connection

Termnal Block

4

Ethernet

Network Connection (ADSL, Cable Modem, Ethernet 10/100/1000
Base-T)

RJ-45

5

HDMI

HDMI Video output

HDMI type-C

6

eSATA

External SATA Storage

eSATA

7

VGA-OUT

VGA Monitor or LCD Monitor connection

D-SUB 15P

8

AUDIO OUT

Audio output connection (Line Only Output)

RCA

9

AUDIO IN

Audio input connection (Line Only Input)

RCA

10

CAMERA IN

HD-SDI Camera connection

BNC

11

SPOT

SPOT Video output / CCTV monitor connection

BNC

12

TV

CCTV Monitor Connection(Divided Screen)

BNC

13

CAMERA IN

SD Camera connection

BNC

www.Veilux.net

１-６ Installation and Connection

[Figure 2-1. VRHD-8-4SDI Basic Connection and Device Connection]

[Figure 2-2. VRHD-8-4SDI Basic Connection and Device Connection]

9 Veilu x VRHD-8-4SDI Operating Instruction & User’s Guide

Veilux VRHD-8-4SDI Operating Instruction & User’s

10

Guide

www.Veilux.net

１-６-１ Basic Connection

By referring to above [Figure 2-1] and [Figure 2-2], Connect the CCTV camera, CCTV monitor (or VGA monitor),
and USB mouse to the DVR and set up CONFIG SWITCH.

Connecting Device

DVR Terminal

1

CCTV camera

Rear Panel Video Input

2

CCTV monitor

Rear Panel TV

3

VGA Monitor / LCD Monitor

Rear Panel VGA-OUT

4

Mouse

on Front Left side

5

CONFIG SWITCH

Rear Panel NTSC/PAL or VGA/TV Setup

Refer to the CONFIG SWITCH description as below.

1. The input video type must be either NTSC or PAL; these two types must not be used together.

2. Select the input video format (NTSC/PAL) using the CONFIG switch on the rear side of the product.

3. Should select one between 1080p and 720p for input resolution. These two types must not be used
together. 8Ch DVR is setup 720P regardless of video input. (Please Note that the Veilux 8CH DVR will
only go up to 720P not 1080P. Even if switches are configure correctly.)

１-６-２ Connection of Other Devices

Connect the PTZ controller cable, audio in/output, network and sensors as below.

Connecting Device

DVR Terminal

1

SPOT Monitor(CCTV Monitor)

Rear Panel SPOT

2

Mike / Speaker

Rear Panel Audio Input / Audio Output

3

LAN Cable

Rear Panel Ethernet

4

PTZ Camera

Rear Panel Terminal Block

5

Sensor / Relay / TTL OUTPUT

Rear Panel Terminal Block)

6

Key controller

Rear Panel Terminal Block

1) SPOT Monitor
Connect Spot Monitor to the spot connector on the rear panel.

2) Audio In/Output
Audio supports 4 inputs and 1 output.

3) Terminal Block
Terminal Block on the rear panel is for the connections of PTZ / Sensor / Relay.

Veilux VRHD-8-4SDI Operating Instruction & User’s

11

Guide

www.Veilux.net

[Figure 2-3. Terminal Block Description]

4) PTZ Camera/Keyboard Controller

Connect PTZ camera to TRX+(No.4) and TRX-(No.5) and GND(No.10). You may refer to APPENDIX for
supported PTZ camera list in this manual. Keyboard Controller has same connection way of PTZ camera.

PTZ Camera may not be working properly if GND is not connected.

5) Sensor/Relay
Connect Sensor/Relay to Terminal Block directly.

(1) Sensor Connection

① Connect Sensors to the Terminal Block S1 ~ S4.
② Each input terminal may be connected regardless of the channel number.

Sensor has the type of NC(Normal Close) and NO(Normal Open).
For Setup {Menu}  {Setup}  {Action}  {Event}  {Sensor Type}

NC(Normal Close) : Normally closed; opens when a signal is received.

NO(Normal Open) : Normally opened: closed when a signal is received.

(2) Relay Connection

① Outputs alarm signals to external devices such as siren by relaying them to these external devices.
② Connect Relay to R1 of Terminal Block (TB1).

Relay has the type of NC(Normal Close) and NO(Normal Open).
For Setup {Menu}  {Setup}  {Action}  {Alarm}  {Relay Type}

NC(Normal Close) : Normally closed; opens when a signal is received.

NO(Normal Open) : Normally opened: closed when a signal is received.

Chapter 3. Operation and Setup Tools

１-６-３ SH2 series Front Panel Button

No.

Name

Feature

1

POWER

Power On/Off

2

MOVE & DISPLAY

Move from one category to another or change the display

mode

3

ESC

Exit the current menu or selects the upper menu

4

MENU

Various Modes

Veilux VRHD-8-4SDI Operating Instruction & User’s

12

Guide

www.Veilux.net

5

MODE

Menu for display mode

6

PLAY

Playback/Fast Forward (in Playback mode)

7

Frame by Frame

Playback Frame by Frame (in Playback mode)

8

PAUSE

Pause (in Playback mode)

9

Reverse Frame by Frame

Backward Playback Frame by Frame (in Playback mode)

10

Reverse Play

Backward Playback/Rewind (in Playback mode)

11

IR Sensor

Remote controller input sensor

12

POWER LED

LED indicating Power On/Off

13

RECORD LED

Green LED turned on upon HDD operation

14

Our Logo

Veilux Logo

15

USB

[Side] USB Mouse, USB Memory Stick Connection Port

Veilux VRHD-8-4SDI Operating Instruction & User’s

13

Guide

www.Veilux.net

POWER

Turn the system power
ON or OFF.

ESC

Exit the current menu
or select the upper menu

MENU

To see the Menu

MODE

None usable

SELECT

Select the category or execute
automatic screen conversion

MOVE

Move from one category to another or
change the display mode

１-６-４ VRHD-8-4SDI Remote Controller

a) Basic Control Button

POWER

MODE

MENU

ESC

b) Search Button (Playback Mode)

Reverse Play

Reverse Play

Play

Play

Reverse Frame by Frame

Reverse play frame by frame

Pause

Pause

Frame by Frame

Play frame by frame

１-６-５ Mouse

Operate the system by using Mouse. The mouse pointer will be shown when a Mouse is connected to USB port
on the front panel.

Mouse control supports the features as below.

Click on the right button

Monitoring Mode / Move from Play Mode to
Monitoring Menu / Pop up or remove Play Menu.
Show sub-folder of the certain Menu window.

Click on the left button

Select Menu.

Double click on the left
button

Select Menu.

Drag the left button

Move a certain window.

Chapter 4. DVR Operation Setup

１-７ VRHD-8-4SDI Storage Installation

※ The recommended HDD specification are shown below.

Type

Size

Capacity

Buffer

RPM

SATA I, II

3.5“ 1, 2 Flat

Max. 2TB

Over 8MB

Over 7200

Veilux VRHD-8-4SDI Operating Instruction & User’s

14

Guide

www.Veilux.net

1) Open the top case by using screw driver.

1) Normal termination of the system and fully unp lugged power code
are required before conducting HDD installation.

2) Touch a grounded metal substance or ground yourself before
installing HDD in order to reduce static electricity. Static electricity may
cause a malfunction of the product.

3) After installing HDD, Do not connect to power supply with the top
case opened. The top case must be covered before usage.

2) Unscrew and separate the HDD bay from body.

3) Screw the additional HDD bay to current HDD bay

4) Connect HDD to HDD connector on the main board directly without cable.
Reassemble the top case by reversing 1) to finalizing HDD installation.

Veilux VRHD-8-4SDI Operating Instruction & User’s

15

Guide

www.Veilux.net

１-８Power ON.

① Check the adapter (12VDC/3.5A) and connect the power.
② Booting will be initialized after pressing the power button on the front panel.
③ Menu widow pops up by clicking the right button of the mouse or pressing [MENU] button in the fr

ont panel as shown below.

Default ID and PW is as below

[ ID: Local Admin, PW: 00000 ]

[Figure 4-4. Menu Window]

１-９Storage Setup

① {Menu}  {Setup}  {Storage}  {Local Storage Management}  {New}
② Select the HDD on New tap and then select Recording-Init.

[Figure 4-5. Storage Device New Tab menu]

③ {Recording-Init} means that it is initializing for recording.

④ After initializing done, HDD on New tap will be moved to Recording tap.

{Recording-Init} procedure may take time.

Refer to [6-4 Storage] for better understanding about storage.

１-１０Recording Setup

① {Menu}  {Setup}  {Action}  {Recording}
② Setup for [Recording Resolution]/[Recording Quality]/[Recording Speed]/[Audio].

Veilux VRHD-8-4SDI Operating Instruction & User’s

16

Guide

www.Veilux.net

1 2 3

4 5 6

7 8

１-１１ Date/Time Setup

① {Menu}  {Setup}  {Time}
② Setup for time

Chapter 5. System Operation

１-１２ Starting System and Exiting the System

① Press the power button with the power connected.
② All channels connected to cameras will be displayed after booting is completed.
③ The system will be terminated after authentication is completed,

１-１３ Monitoring

１-１３-１ Screen Division and Auto Sequence

Full Screen(8 groups)

●●●

1 2 3 8

Use the Full Screen mode button or double click the channel you want

4Sub-Screen (2 groups)

1

2

5

6

3 4 7

8

Use the 4Sub-Screen button.

9Sub-Screen (1 group)

Use the 9Sub-Screen button.

Auto Sequence

① Rotating images (channels) with the certain time.
② Select the certain time (1 sec.~10 sec.) on {Menu}  {Miscellaneous}  {Setup}
③ Auto sequence is starting after pressing the select button or icons on the status bar as below.

１-１３-２ Zoom (x16)

Zoom in & out for specific zone on live display.

Veilux VRHD-8-4SDI Operating Instruction & User’s

17

Guide

www.Veilux.net

① Move to the Zoom mode by selecting the icon on the status bar thru Mouse.
② Control the Zoom by using the up/down buttons or Mouse.
③ Menu for zoom will be disappeared after pressing ESC button or the left button of the Mouse.

１-１４ System Login

１-１４-１ User Account and Authorization

Local Admin

The local administrator has all authorities. (But, remote access is not available)

Default password is [00000]

User

Up to 15 users are allowed. Each user can access the functions depending on the
given authorities.
For Authorization Setup, Move to {Monitoring Menu}  {Setup}  {System}

{4. User Registration}.

１-１４-２Login

For security purpose, user must log in first.

① Select {Menu}  {Login} on the live display.
② Password for English can be shown after selecting the spac e of password.

１-１４-３ Logout

After logout, user can’t use menu.

① Select {Menu}  {Logout} on the live display.

Veilux VRHD-8-4SDI Operating Instruction & User’s

18

Guide

www.Veilux.net

１-１５ System Information View and Display Setup Change

Audio/Recording Status/Channel Title/Connection Indicator/Time/HDD status are displayed as shown below.

[Figure 5-6. Recording Status Window]

※ Recording Event / Recording mode display ※

Recording

Event

Motion recording

Sensor recording

Audio recording

Recording

Mode

Video recording

Audio recording

※ Live Display ※

Video is not connected or Video is covert

Audio is set activated

Audio is set silent

No Signal

Camera has been disconnected

The channel for PTZ setup

The channel for PTZ tour1 setup

The channel for PTZ tour2 setup

Veilux VRHD-8-4SDI Operating Instruction & User’s

19

Guide

www.Veilux.net

※ Control Bar※

①

1Ch display mode

②

4Ch display mode

③

8Ch display mode

④

Zoom

⑤

Auto Sequence

⑥

Date / Time

⑦

HDD Status

⑧

Playback

１-１６ System Information

① Select {Menu}  {Miscellaneous}  {DVR info.}
② DVR info. Will be displayed as shown below.

[Figure 5-7. DVR Infomation]

Veilux VRHD-8-4SDI Operating Instruction & User’s

20

Guide

www.Veilux.net

１-１７ Display Setup

① Select {Menu}  {Miscellaneous}  {Display Setup}

(1) Camera Title, Control Bar, Button Sound

Set the title of camera and control bar, button sound.

(2) Border Line

Set the border line between channels.

(3) Screen Saver

Set Monitor saver.

(4) Spot & Main Sequence

Set the Duration for Spot and on/off for event.

１-１８ Audio, Relay, Spot control

① Select {Menu}  {Miscellaneous}  {Control}

Veilux VRHD-8-4SDI Operating Instruction & User’s

21

Guide

www.Veilux.net

(1) Audio

Setup for Audio channel and mute.

(2) Relay

Setup for Reply out or cancellation

(3) SPOT

Control Sequence or Manual Spot.

※ Spot functions is only available for VRHD-8-4SDI.
※ Event Spot is only working under the Sequence Spot.

※ Event Spot: spot out the channel which is detected event.

１-１９ Search

Calendar Search

Search the recording data by year/month/day/time.

Go To The Last

Playback the last recorded data by multi-channel mode.

Go To The First

Playback the first recorded data by multi-channel mode.

Go To the Last Played Time

Playback the last played time by multi-channel mode.

Veilux VRHD-8-4SDI Operating Instruction & User’s

22

Guide

www.Veilux.net

Current

Recorded image files with the current set time.

Old Number

Recorded image files before the time change.

１-１９-１ Calendar Search

Select {Menu}  {Search}  {Calendar Search} on the live display mode and then a searching window pops
up as shown below.

[Figure5-8. Search Window]

Green

Continues recording is in progress

Red

Motion recording is in progress

Blue

Sensor recording is in progress

Yellow

Audio recording is in progress

１-１９-２ Time Index

① New folders (directories) are created every time when the time is changed on {Menu}  {Setup}

 {Time}  {Date/Time}.

② Many Time Indexes comes out when you select the menu for Time Index on the right side of sear

ch mode.

１-１９-３ List All

Current recording time list is showed regardless how many times system time has been changed.

① All list comes out after selecting {List All} on the bottom of search mode.

Veilux VRHD-8-4SDI Operating Instruction & User’s

23

Guide

www.Veilux.net

１-２０ Log Viewer

DVR records all Log information over the system operation including Power on/off, System Setup and Network
Access. Move to {Menu}  {Miscellaneous}  {Log Viewer} to see the logs.

[Figure 5-9. Log Viewer]

All

Logs related to all system operations.

Fail

Logs related to system operation failures, e.g., signal loss and network
connection failure.

Network

Logs related to network operations e.g., network login, network logout,
and network live.

Recording Event

Logs related to recording, e.g., motion detection and sensor detection,
Audio detection.

General

Logs related to power ON/OFF, file copy/backup failure, setup start/end,
playback, and other basic system operations.

Veilux VRHD-8-4SDI Operating Instruction & User’s

24

Guide

www.Veilux.net

１-２１ Playback

There are three routes {Live Monitoring}, {Search}, {Log Viewer} to playback on DVR.
On Live display (monitoring), select {Menu}  {Search}  {playback}.

[Figure 5-10. Playback Screen]

１-２１-１ Playback status and Playback Speed Control

[Figure 5-11. Playback Status and Control bar]

Description of the Search Buttons

Button

Name

Features

Forward Play / Fast Forward

x1  x2  x4  x8  x16  x32  x300  x1

Forward Frame by Frame

Playback frame-by-frame

Pause

Pause

Reverse Frame by Frame

Reverse playback frame by frame

Reverse Play / Fast Reverse

reverse x1  x2  x4  x8  x16  x32  x300  x1

LIVE

Move to the live display(monitoring)

Veilux VRHD-8-4SDI Operating Instruction & User’s

25

Guide

www.Veilux.net

１-２１-２ Smart Search

This function is for search an image with the object movement at a specific zone as fast as it can. Searching by
each channel is available.

１-２１-３ MULTI TIME

Multi-Time is to play the recorded image of the different time over a certain designated channel. The lineup of the
recorded image of the different time is the most recent-bottom.

１-２１-４ MULTI DAY

Multi-Day is to play the recorded image of the different day over a certain designated channel.
The lineup of the recorded image of the different time is the most recent-bottom.

１-２１-５ Event

Event is to play the recorded image with [All/Motion/Sensor/Audio].

１-２１-６ Panorama Playback

Playback the certain channel by frame by frame..

１-２２ Backup

Before backup process, CD/DVD or external HDD, CD, DVD supporting USB2.0 should be connected to the DVR.
Refer to Appendix on the last page of this manual to get information of compatible list.
There are three routes to backup on DVR.

[Figure 5-12. Backup]

① In real-time monitoring mode, select {Menu}  {Backup}  {Backup}. The backup menus will the

n appear.

② Show the free and total space, after selecting backup device.
③ Check the time/date and channel.
④ Backup will be progressing after click the start button.

If the total size is smaller than backup size, it shows as red and not allowed to backup.
If the backup storage device is not formatted, in case the box displaying the size of the

file to be backed up is displayed in yellow, and if backup is executed by pressing the

Copy (Backup) button, a prompt asking whether to erase the de vice will appear as
shown below. Selecting [YES] causes the storage medium for the selected device to be
erased.

１-２３ Snapshot

The Snapshot function lets the user create a JPG file in live monitoring, playback.
On the live monitoring, Select {Menu}  {Backup}  {Snapshot} and then directly move to Shapshot

menu.

① Will see the storage selection window. After selecting storage, backup will be done.

１-２４ Log Backup

All of recorded log data such as Normal/ Recording Event/ Network/ Failure could be backed up.

① Select {Log Viewer}  {Log Backup} or {Menu}  {Backup}  {Log Backup}.
② Setup after checking device, time and event. .
③ Backup is started after selecting start button.

Log file is text format so the file could be open easily.

１-２５ Setup Backup

Backup all setup data which is applied to the DVR.

① Select {Menu}  {Backup}  {Setup Backup}.
② After selecting storage, backup will be done.
③ The file from Setup Backup can be applied to another DVR with {Menu}  {Setup}  {System}

 {Upgrade}.

26 Veilux VRHD-8-4SDI Operating Instruction & User’s

Guide

www.Veilux.net

１-２６ PTZ Camera Control

① PTZ camera setup should be correct on here {Menu}  {Setup}  {Definition}  {PTZ}.
② In real-time monitoring mode, select {Menu}  {PTZ Control}.
③ PTZ Full control window is coming out after selecting MENU button or the right button of the Mous

e. If you are okay with PTZ Simple control window, selecting ESC button or the right of the Mouse

just after that.

(1) Camera

<PTZ Simple Control Window> <PTZ Full Control Window>

Select PTZ to be controlled.

(2) Speed

PTZ camera speed is adjustable.

(3) Tour

To use this feature, it should be setup with {Menu}  {Setup}  {PTZ}  {Tour}.

(4) Left, right/up, down/zoom

Control the Left/Right/Up/Down/Zoom of PTZ camera.

(5) Preset

Using Left/Right/Zoom movement of PTZ Camera, zoom or focus a certain spot of the image by designating the
coordinates and move to the designated coordinates quickly.

(6) Home Position Time
If there are no controlling signals to PTZ camera after a certain time, it goes automatically to the Preset No.1
position as Preset No. 1 is designated as Home Position.

(7) Menu
Control PTZ Menu directly.

27 Veilux VRHD-8-4SDI Operating Instruction & User’s

Guide

www.Veilux.net

Chapter 6. Setup

１-２７ Time

Select {Menu}  {Setup}  {Time} on the live display (Monitoring).

[Figure 6-13. Date and Time Window]

(1) NTP Sync

Synchronize DVR time with NTP Server time at one time in hour.

(2) Date and Time
Change the system date/time and the time format.

(3) Standard Time Zone
Select {Standard Time Zone}, {Daylight Saving Time}, {Start/End time}.

(4) Auto Rebooting
Select the period for auto rebooting of DVR system.

28 Veilux VRHD-8-4SDI Operating Instruction & User’s

Guide

www.Veilux.net

Veilux VRHD-8-4SDI Operating Instruction & User’s

29

Guide

www.Veilux.net

１-２８Definition

Select {Menu}  {Setup}  {Definition} on live display (Monitoring).

[Figure 6-14. Definition Window]

１-２８-１Camera

(1) Connect
Set on/off of the camera.

(2) Title
Set the name of each camera up to 20 characters.

(3) Covert
Set the live channel not to be showed for pricy reason.

※ On the live display(Monitoring), it shows as black. But, it keeps recording as setup.

(4) Adjust

Brightness/ Contrast / Hue/ Saturation / Sharpness / Camera

※ it is not allowed to use the Adjust menu for HD channels.

１-２８-２ PTZ

Set the Tour, Protocol, ID, Baud rate of PTZ camera.

１-２８-３ Event Source

Set the Motion Area, Motion Sensitivity, Sensor Type, And Sound Sensitivity.

１-２８-４ Relay

Set the type of Relay.

１-２９ Action

Set recording, system, main features. {menu}  {setup}  {Action}

Veilux VRHD-8-4SDI Operating Instruction & User’s

30

Guide

www.Veilux.net

[Figure 6-15. Action Window]

１-２９-１ schedule (schedule1 - schedule4)

4 different settings can be applied by time and date on schedule table for user convenience. Please go to
Menu / schedule after setting up schedule1, schedule2, schedule 3, schedule 4 differently.

１-２９-２ Event

Set the motion, Sensor, Audio.

１-２９-３ Recording

Set the Resolution, Frame, Quality, and Audio.

Resolution

NTSC recording resolution

PAL recording resolution

CIF

352ⅹ240

352ⅹ288

2CIF

704ⅹ240

704ⅹ288

4CIF

704ⅹ480

704ⅹ576

720p

1280 x 720

1080p

1920 x 1080

Recording frame rate

Normal Speed

when record continuously

Event Speed

When record by motion, sensor, audio

１-２９-４ Alarm

Set the Alarm action Buzzer, PTZ Preset, E-mail, Relay, Spot, Popup and Callback when event comes out.

１-２９-５ Duration

Pre alarm( On / OFF ), post alarm(5sec / 10sec / 15sec / 20sec / 60sec / 150sec / 300sec)

Veilux VRHD-8-4SDI Operating Instruction & User’s

31

Guide

www.Veilux.net

[Figure 6-16. Pre/post alarm]

１-２９-６ Log

Set On/off of log by motion detection / sensor input / sound detection.

１-３０ Schedule

Select {Menu}  {Setup}  {Schedule} on the live display.
{Schedule} is used to save the system configuration as data from {Schedule 1 ~ 4} and to make a recording
based on the system configuration for each day/time zone.

[Figure 6-17. Schedule Window]

１-３０-１Holiday setup

Set the Holiday for recording schedule.

Veilux VRHD-8-4SDI Operating Instruction & User’s

32

Guide

www.Veilux.net

１-３１ Storage

Select {Menu}  {Setup}  {Storage}.

[Figure 6-18. Storage Window]

１-３１-１ Max. Recording Days

This is to limit the recording days. You can set none/1day/7days/30days/User setting (1-99).

１-３１-２ HDD Overwrite

Set On/Off for HDD Overwrite.

On

If there is no more hard disk space left, the existing files will be overwritten starting with the
oldest.

Off

If there is no more hard disk space left, further recording will not be executed.

１-３１-３ Local Storage Management

(1) Local Storage Management Function

New

All initially detected storages are displayed as New

Recording Initialize – Changed it for Recording
Backup Initialize – change it for Backup

Recording

Storage list for Recording
※ At least, one storage shall be selected as a dedicated storage. Otherwise, the
data cannot be stored in real time.

New – Returns the status of the selected storage device to New
Online - Changes the selected storage device in online state.
Offline - Changes the selected storage device in offline state. (Disable to record)
Format – Format the selected storage. (Available only in Offline.)
Eject - Separates the selected device completely from the software.

Backup

Storage list for Backup

Veilux VRHD-8-4SDI Operating Instruction & User’s

33

Guide

www.Veilux.net

(2) Configuration of the local storage device

※ There are three software status types.

Active

Connected to storage or backup device; currently saving the data.

Online

Only connected to storage or backup device.

Offline

Not connected to storage or backup device.

※ There are three hardware status types.

Healthy

Connected to storage or backup device; functions normally.

Warning

Connected to storage or backup device, but error was detected; in this case,
data storing or backup cannot be made (for more information, see the
description below).

Fault

Not connected to storage or backup device; cannot perform data saving or
backup.

1. Fault State: The storage device is completely damaged, and none of the S/W operations
can be performed. The fault state is not related to a DVR problem. The DVR has detected the
fault and stopped the recording.

2. Warning State: The storage device has a physical error that can be corrected by the storage
device or by the DVR. If the error is not taken care of, however, the storage device is likely to
be damaged (and shift to fault state). Backing up data in the corresponding storage device
and replacing the device with a normal one are strongly recommended.

3. If there is an active storage device with a warning or a fault, a message is displayed on the
upper left part of the screen.

Veilux VRHD-8-4SDI Operating Instruction & User’s

34

Guide

www.Veilux.net

１-３２ Network

Set the system network. {Menu}  {Setup}  {Network}.

[Figure 6-19. Ethernet Window]

１-３２-１ Ethernet

Set the IP, ADSL, Gateway and DNS as above.

１-３２-２ DDNS

As part of the DNS system, the Dynamic Domain Name System (DDNS) service updates the IP addresses of
host names in real time and allocates fixed domain names to systems linked to dynamic IP addresses to allow
users to use the same DNS name regardless of the changes in the IP address.
It provides dynamic DNS to ensure URL access in the dynamic IP environment.
User can monitor the remote place thru internet with web server functions which is equipped in DVR.

※ Access to DynDDNS sever(http://www.dyndns.org) and apply for the user account

then, register the domain name to use and enter URL.

※ For more information, please access to the sever.

１-３２-３Port

Set the port for network.
UPnP function will be available on the selection of On. On UPnP, ’Success’ will be popped up on the port
registration at Router. Otherwise, ‘Failure’ will be popped up instead.

１-３２-４ E-mail

Automatic E-mail transmission service when an event occurs.

１-３２-５ Bandwidth

This sets up the limit of the bandwidth to be used when bringing the live image, adjust resolution/quality and
transmitting the data by using the network.

１-３２-６ Callback

The signal is transferred to callback server for auto-recording when there happens an event at the site.

Veilux VRHD-8-4SDI Operating Instruction & User’s

35

Guide

www.Veilux.net

１-３３ System

{Menu}  {Setup}  {System}

[Figure 6-20. System Setup Window]

DVR Name

MAC address for DVR. Available to change whatever user wants.

ID for Key Controller

Set the identify no. of key controller

Users

Adds, edits, or deletes the users who will operate the system.

Admin. Password

Set the password for the Local Admin.

Upgrade

Firmware – Firmware upgrade
Setup – Change the setup of DVR

Factory Setup

Initializing it as setup (Except Network setup)

Error Alarm Action

Alarm is to notify system incidents [Video Signal loss/ HDD full/ FAN
fail/ HDD fail/ HDD warning] to [Alarm/ E-mail/ Relay01/ System
check].

Error Alarm Duration

Set the alarm duration

Menu Time Out

If no input is made in the System Setup menu using the front buttons,
remote controller, or mouse, the system automatically shifts to real­time monitoring mode.

Language

Set the system language.

Veilux VRHD-8-4SDI Operating Instruction & User’s

36

Guide

www.Veilux.net

A/P/P/E/N/D/I/X

(1) Recommended HDD

APPENDIX

Type

Size

Capacity

Buffer

RPM

SATA I, II

3.5“ 1, 2 Flat

Max. 2TB

Over 8MB

Over 7200

(2) Recommended PTZ Camera Protocol.

NO

Vendor

Protocol

7

GE

GE_KARATEL

9

HITRON

FASTRAX2

10

HONEYWELL

HSDN-251

11

LG

LG_MULTIX,

LG_OLD

12

MIKAMI

MIKAMI

13

ORIENTAL

ORX-1000

14

PANASONIC

WVCS854

15

PELCO

PELCO – D

PELCO - P

16

PHILIPS

PHILIPS

19 SAMSUNG TECHWIN

SPD-1600

SCC641

21

VICON

VICON

(3) Recommended USB2.0 Device

USB2.0 Device

Media

File System

Memory Stick

Flash Type

FAT32

2.5’’ Portable USB HDD

HDD Type

FAT32

CD

CD R, R/W

ISO9660

DVD

DVD +R, +R/W

ISO9660