Veilux SVEX-W125 Specsheet

FEATURES: FEATURES:
•Stainless Steel Material
•Stand Installation
•Pan / Tilt w/ Camera Housing
•All Kinds of Camera Optional
•Multiple Protocol for Multi-Control System
•350° Pan Turning
•+90° ~ -90° Tilt Turning
•Preset Positioning
•IP67
•Indoor & Outdoor for All Weather Use
•Bracket or Base Installation
EXPLOSION PROOF
CAMERA
SVEX-W125
The SVEX-W125 EXPLOSION PROOF camera is a new extreme condition surveillance camera that adopts the most advanced production techniques. It has a matured high-end management system that makes it a quality, performance, and appearance leader in explosion proof monitoring products. It can be used in flammable, explosive, and extreme environmental conditions.
Strictly according to European Directive EC/94/9 and EN50014, Standards of GB3836.1-2000 GB3836.1—2000 Electrical apparatus for explosive atmosphere: General requirements, GB3836.2-2000 Electrical apparatus for explosive atmosphere: Flameproof ‘d’ and GB12476.1-2000 Electrical apparatus for explosive dust.
The SVEX-W125 is integrated with a 43x optical zoom and 16x digital zoom Samsung camera model. The camera steel case has an integrated structure design to allow the cable to run from the camera housing through the steel body case and to the output tube at the bottom end. This allows the camera to pan and tilt freely without any interruptions, which goes 350° horizontally and ±90° vertical.
3015 Eagle Drive, Suite 100, Grand Prairie, Texas 75052
Local Number: (214) 635-4855 / Fax: (928) 437-6270
sales@veilux.net
www.veilux.net
FEATURES:
EXPLOSION PROOF
CAMERA
SVEX-W125
Ex-Marking
Certificate Pending License No.
Input Voltage
Input Voltage Scope Working Current
Preset Qty
Preset Accuracy
Preset Voltage Preset Object
Power Consumption Electric Connection Pan / Tilt
Camera Housing
Coaxial Cable
DIMENSION:
Exd II CT6 / EExd II CT6
Nemko 05ATEX1190 XK06-123-00251
220VAC / 24VAC, 50/60Hz, 120 / 24VAC
±10%
≤1A
According to Decoder
1.5° 5VDC
Pan / Tilt Horizontal & Pitching
Location Lens Zoom Location
85W
7-Core Wire for Pan/Tilt
Driving and Auto Heating
8-Core Cable for Connecting Camera Power, Lens
Auto-Heating (Optional)
Material
Protection
Pan Tilt Pan / Tilt Speed
Unit Weight
Shipment Weight
Mounting
Air Pressure
Environmental Temperature
Humidity
Works Under -10°C
Stainless Steel 1Cr18Ni9Ti or 316L IP-67
0 ~ 350°
±90° ±
3.8°/s
49Kg 53Kg Bracket, Base or Pole Mounting
86 ~ 106KPa
-40°C ~ +60°C (With Auto-Heat) ≤95%RH (+25°C)
3015 Eagle Drive, Suite 100, Grand Prairie, Texas 75052
Local Number: (214) 635-4855 / Fax: (928) 437-6270
sales@veilux.net
www.veilux.net
SPECIFICATIONS:
INTREGRATED CAMERA
FOR SVEX-W125
SCC-C4355
Image Device Pixels / Effective
Resolution Horizontal Min. illumination Color Sens-Up Off
Color Sens-Up 512x
B/W Sens-Up Off
B/W Sens-Up 512x
# of Privacy Zone Day / Night
Motion Detection
Wide Dynamic Range D-Zoom
High Speed Shutter Sens-Up / PIP / BLC AGC
Auto Focus
Syncronization Camera ID
VPS (Virtual Progressive Scan) XDR (Extended Dynamic Range) DNR (Digital Noise Reduction)
Schedule White Balance
1/4” Ex-View HAD PS CCD 768 x 494 (NTSC) / 752 x 582 (PAL) 600 (Color) TV Lines
0.6 Lux (15IRE), 1.2 Lux (30IRE), 2 Lux (50IRE)
0.001 Lux (15IRE), 0.002 Lux (30IRE),
0.004 Lux (50IRE)
0.06 Lux (15IRE), 0.12 Lux (30IRE),
0.2 Lux (50IRE)
0.0001 Lux (15IRE), 0.0002 Lux (30IRE),
0.0004 Lux (50IRE)
12 ea
Auto / Day / Night (ICR) Yes, Sensitivity 1 ~ 7 Level Yes (NTSC: 128x, PAL: 160x) Yes (~16x) 1/100 - 1/10K sec Yes (2x ~ 512x) / Yes / Off / On Off / On (Very Low / Low / Mid / High / Very High / User / Fix) Manual / Auto / One AF
Internal / Line Lock
Max 54 Character, 2 Line
Yes
Off / On (Low / Middle / High) Off / On (Low / Middle / High / User (3D / 2D))
Day / Time Schedule
ATW1 / ATW2 / AWC (Manual) /
3200 / 5600
FEATURES:
•1/4” SONY 410K / 470K Pixels Ex-View HAD PS CCD
•43x (f=3.2 ~ 138.5mm) Optical & 16x (0.1 step) Digital Zoom
•High Resolution: 600 TV Lines
•Min. illumination: 0.001 Lux (F1.2, 15 IRE, Sense-Up x512, Color)
0.0001 Lux (F1.2, 15 IRE, Sense-Up x512, B/W)
•Wide Dynamic Range (NTSC 128x, PAL 160x)
•Virtual Progressive Scan (VPS)
•Day Night Function (ICR), Sense-Up Function (x512)
•Adaptive Digital Noise Reduction (3D + 2D)
•Back Light Compensation (Area Setting)
•Advanced Motion Detection Function
•Extended Dynamic Range (XDR)
•Privacy Mask Function (12ea)
•DIS (Digital Image Stabilization)
•CCVC (Camera Control Via Coaxial)
•RS-485 (Half) Control (Multi-Protocol Support)
•Multi-Langauge OSD (E, F, G, S, I, J, R, P, C, etc) Support
•Intelligent Video (Moved / Fixed / Fence / Tracking)
•Preset 512 ea, Alarm Output 1 ea
•24VAC / 12VDC
Video Output S/N Ratio
Lens Focal Length
Min. Object Distance
Zoom Ratio
Aperature Ratio Viewing Angle - Tele Viewing Angle - Wide
Lens Drive Type
Mount Type
VBS 1.0Vp-p 52 dB
3.2 ~ 138.5mm
100cm
43x Optical (688x with 16x Digital Zoom) F1.65 (W) / F3.7(T)
1.47°(H) x 1.10°(V)
61.22°(H) x 47.16°(V) DC Auto Iris
Board-in Type
3015 Eagle Drive, Suite 100, Grand Prairie, Texas 75052
Local Number: (214) 635-4855 / Fax: (928) 437-6270
sales@veilux.net
www.veilux.net
OSD
Alarm Output
Remote Control Operating Temperature
Operating Humidity
Power Requirement Power Consumption LED Indicator
Dimensions (WxHxD)
Weight Color
Yes 1 ea RS485, CCVC
-10°C ~ +50°C
Less than 90% 12VDC, 24VDC
5.6W Yes 59mm x 59mm x 144.2mm 508g Silver
ESSENTIAL ACCESSORIES:
SVEX-M25 is a special designed for pan/tilts wall mounting with load 100kg. Used for SVEX-W125.
ACCESSORIES FOR SVEX-W125
SVEX-M25 | SVEX-JXD
DTMRX2
ESSENTIAL ACCESSORIES:
ESSENTIAL ACCESSORIES:
The DTMRX2 is a digital receiver, controlled by a microprocessor, for remote control of a Pan & Tilt
motor and a motor-driven zoom lens.
SVEX-JXD assist equipments of
explosion proof television and communication system.
3015 Eagle Drive, Suite 100, Grand Prairie, Texas 75052
Local Number: (214) 635-4855 / Fax: (928) 437-6270
sales@veilux.net
www.veilux.net
FEATURES:
150
222
COMMUNICATION TERMINAL BLOCKS AND LENSES CONTROL OUTPUT
DIP-SWITCH FOR ADDRESS, COMMUNICATION SPEED AND PROTOCOL
COMMUNICATION TERMINAL BLOCKS
AND LENSES CONTROL OUTPUT
BNC FOR COAX TRANSMISSION
•Microprocessor Controlled
•12 Functions
•RS232, RS485 or Over Coax Communications
•Remote Control Up to 1200m (3937 Ft, RS485)
•Weatherproof Standard IP-56
TELEMETRY RECEIVER
12 FUNCTIONS
DTMRX2
The DTMRX2 is a digital receiver, controlled by a microprocessor, for remote control of a Pan & Tilt motor and
a motor-driven zoom lens.
DIAGRAM:
The DCT, DCJ, DCTEL, DCIR and SM matrix series control units ensure complete control of all the DTMRX2 functions. It
is also interfaced to a PC thorugh RS232. Connection to the
control unit can be RS232, RS485 or over Coax cable (in this
case, the connection to the matrix distance can reach up to
350m).
An IP-56 weatherproof box ensures protection against all
weather conditions.
It is available in 24VAC or 230VAC versions for Pan & Tilt
motors, and allows feeding common ground or polarity inversion zoom lenses.
A relay auxiliary function is available for controlling, for instance,
the switching on of an IR illuminator thorugh a power contact or the control of the wiper.
Four PG11 cable glands make connections easier.
(This Telemetry Box is manufactured & warranty by Videotec)
3015 Eagle Drive, Suite 100, Grand Prairie, Texas 75052
Local Number: (214) 635-4855 / Fax: (928) 437-6270
sales@veilux.net
www.veilux.net
TELEMETRY RECEIVER
12 FUNCTIONS
DTMRX2
GENERAL
- 12 Functions: Up, Down, Left, Right, Auto, Zoom Tele, Zoom Wide, Focus Near, Focus Far, Iris Open, Iris Close, Aux
- 99 Identification Addresses, Selectable By Dip Switches
- Serial Communication Selectable Between RS232, RS485 and Over Coax
- Repeater RS232 or RS485 for Daisy Chain Configuration
- Ability to Use Both Polarity Inversion Lenses and Common Wire Lenses
- EEPROM for Storing Activated Functions
- LED Indicating Power Supplied to the Unit
- LED Indicating Command Reception
- LED Indicating Data Reception
- Supplied with Instruction Manual, 2 PG11 Blanking Caps, 4 Wall Mounts
with Relevant Fastening Screws
MECHANICAL
- Plastic Material Enclosure
- 4 PG11 Cable Glands
- Dimensions: 225 x 154 x 81mm (8.8 x 6.1 x 3.2in)
ELECTRICAL
- Power Supply: 230VAC, 50 / 60Hz
- Power Consumption: 10W
- Max Switchable Power: 100W
- Power Supplied to the Positioning Device: 230VAC, 50 / 60Hz
- Power Supplied to the Lens: From 3 to 14VDC, Max 100mA
- AUX: Auxiliary Dry Contact 1A 230VAC
- Protection Fuses: F1: F 250mA L 250V
PROTOCOLS
- VIDEOTEC (1200, 9600, 19200, 38400 Baudrate)
- MACRO (1200, 9600, 19200, 38400 Baudrate)
- PELCO D (2400)
- PELCO is a registered trademark. Because DTMRX2 may be
interfaced with equipment not manufactured by VIDEOTEC, it is possible that the interface protocols have changed or are in a different configuration from earlier tested units from us. Because VIDEOTEC recommends a bench test prior to installation, VIDEOTEC will not be liable for any installation costs or lost revenues in the event a compatibility problem will occur.
COMMUNICATIONS
- Selectable Communication Speed
- Repeater RS232 or RS485 for Daisy Chain Configuration
- Telemetry Data Input RS485 on Matrix Series SM Serial Output for a Max Distance of 1200m (3937Ft)
- Telemetry Data Input RS485 on Keyboard Serial Output, Max Distance of 1200m (3937Ft)
- Telemetry Data Input RS232 for PC or Keyboard Control for a Max Distance of 15m (49Ft)
- Telemetry Data Input Over Coax Cable RG59 or equivalent for a
Max Distance of 350m (1148Ft) From Matrix Series SM
ENVIRONMENT
- Indoor / Outdoor
- Operating Temperature: -20°C / +50°C (-4°F / +122°F)
CERTIFICATIONS
- CE EN60065, EN55022 Class B, EN50130-4
- FCC Part. 15 Class B
- IP-56 EN60529
RELATED PRODUCTS
- SM42B-SM82B Matrix 4/8 Inputs and 2 Outputs
- SM84B-SM164B Matrix 8/16 Inputs and 4 Outputs
- SM328B Matrix 32 Inputs and 8 Outputs
- DCTEL Keyboard to Control Matrix and Telemetry
- DCIR Infrared Remote Control
- DCI Keyboard to Control Matrix, Multiplexers and Telemetry Equipped with Three Axis Joystick
- DCT Touch Screen Keyboard to Control Matrix, Multiplexers, DVRs and Telemetry Equipped with Three Axis Joystick
DTMRX2
- PTH910 Pan & Tilt, 230VAC
- PTH310 Pan & Tilt, 230VAC
- NXPTH210 Stainless Steel Pan & Tilt, 230VAC
- IPT720 Pan & Tilt Wall Mounting, 230VAC
3015 Eagle Drive, Suite 100, Grand Prairie, Texas 75052
Local Number: (214) 635-4855 / Fax: (928) 437-6270
sales@veilux.net
www.veilux.net
Loading...