VEGA TOR532S1 User Manual

Operating Instructions

VEGATOR 532 S1

VEGA TOR 532 S1

VEGATOR 532 S1 is a special version. There
are the following differences to VEGATOR
532 Ex:

- no approval for use in hazardous areas

- use of probes with Ex approval only so
that line break monitoring is available

- channel 2 without function

- relay and transistor output of channel 2
output the fault signal. The technical data of
the outputs remain unchanged

- A/B mode for channel 2 is deleted

- potentiometer for channel 2 without function

Signal lamps

LEDs in the front plate indicate operation,
switching condition of the relay outputs and
fault message.

- two yellow LEDs for status indication of the
relay and transistor outputs

- LED lights = relay energized, transistor
conducts

- LED extinguished = relay de-energized,
transistor blocks

- two red LEDs for failure indication of
channel 1.

- one green LED for indication operating
voltage „on“.

Product description

Potentiometer Kanal 1
Schaltpunkteinsteller

LED Statusanzeige
Relaisausgang 1

LED Störmeldung

Potentiometer ohne Funktion

LED Statusanzeige
Störmelderelais

LED Störmeldung

LED Betriebsspannung

Tec hnical data

Meas. data input (only channel 1)

Quantity 1

Relay outputs

Quantity 2
Level relay 1
Fail safe relay 1

Transistor outputs

Quantity 2
Level transistor 1
Fail safe transistor 1

TT

echnical data see operating instructions manual Conduktive electrechnical data see operating instructions manual Conduktive electr

T

echnical data see operating instructions manual Conduktive electr

TT

echnical data see operating instructions manual Conduktive electrechnical data see operating instructions manual Conduktive electr

2 VEGATOR 532 S1

odes.odes.

odes.

odes.odes.