Vector VN1600, VN1610, VN1611, VN1630A, VN1630 log DATASHEET

Network Interfaces

VN1600

Flexible Bus Interfaces for CAN, LIN, K-Line, J1708 and IO

What is VN1600

The VN1600 interface family provides a flexible and fast
access to CAN (FD) and LIN networks. While the VN1610/
VN1611 with 2 channels focuses on minimum size and
weight, the VN1630A/VN1640A with 4 channels is designed
for flexibility and IO support. The VN1630 log provides addi­tional recording functionality. The interfaces provide the
best network interface for Vector tools such as CANoe,
CANalyzer, CANape, Indigo, vFlash as well as customer
applications; in the laboratory, at the test bench, at the
service garage or in the vehicle. The application areas range
from simple bus analysis to complex remaining bus simula­tions, diagnostic, calibration and flash programming tasks.
The product’s multi-application support makes it possible
to access multiple programs in parallel on one device and
on the same channel.

Overview of Advantages

>

Bus transceiver with proven CAN/LIN/J1708-Piggies*

>

Power supplied via USB, also in 4-channel applica­tions

>

Optimal performance for CANoe*, CANalyzer*,
CANape* or customer applications, with Multi­Application support

>

Support of CAN FD up to 8 Mbit/s

>

Advanced LIN stress e.g. for LIN 2.1 conformance
tests (VN1630A/VN1640A)

>

Synchronized channels with minimal latency times

>

K-Line support *

>

CAPL on Board for CAN, LIN, IO (1630A/VN1640A)

>

Fast CAN flashing by a hardware-based flash
routine implementation

>

Customer applications can be linked with the proven
XL Driver Library

>

LEDs for displaying channel activity and device
status (VN1630A/VN1630 log/VN1640A)

>

Easy configuration of the recording functionality
with the Vector Logger Configurator when using
VN1630 log

* Ask Vector about required software versions and supported

piggies.

VN1630 log with 2 CAN (FD)

and for 2 CAN (FD)/LIN piggies,

additional recording functionality

VN1630A with 2 CAN (FD)

and for 2 CAN (FD)/LIN piggies

4 CAN (FD) /LIN piggies

VN1640A for

VN1611 with

1 CAN (FD)/1 LIN

VN1610 with

2 CAN (FD)

Fact Sheet VN1600

Functions

>

Flexible FPGA-based CAN and LIN implementation
allows 100% bus load on all channels

>

Performing LIN 2.1 conformance tests with CANoe
(VN1630A/VN1640A)

>

Fast baudrates: CAN (max. 2 Mbit/s), CAN FD
(max. 8 Mbit/s) and LIN (max. 330 kbit/s)

>

The integrated IO functionality of the VN1630A/
VN1640A makes it possible to synchronously acquire
signals along with CAN/LIN messages and switch loads
up to 500 mA via a digital output

>

For weight and space savings, the VN1610/VN1611/

Analog/digital IO: VN1630A/1630 log/1640A

>

Analog input:
1 channel, 0...18 V, max. 50 V, (ext. circuitry required)
Ri > 1 MOhm, 10 bit ADC at 1 kS/s

>

Digital input:
2 channels, Schmitt trigger, max. 32 V, Vhigh ≥ 2.7 V,
Vlow ≤ 2.2 V, Vhyst = 0.5 V, Ri > 200 kOhm, max. 1 kHz

>

Digital output:
1 channel, open collector, max. 32 V, max. 500 mA,
max. 1 kHz

>

D-SUB9 socket

VN1630A/VN1630 log have integrated CAN High-Speed
transceiver(s). The standard D-SUB9 connector supports

More information: www.vector.com/vn1600

dual channels.

>

Recording functionality for monitoring vehicle communi­cation (CAN (FD), LIN) with VN1630 log. Data is stored
on an SD/SDHC card (up to 32 GB).

Technical Data

VN1610 VN1611 VN1630A/VN1630 log VN1640A

Max. channels 2 2 4 4

Variable transceiver (Piggies) -- -- 2 4

Permanently installed transceiver 2 x CAN 1051cap 1 x LIN 7269cap

1 x CAN 1051cap

Channel combinations

fixed 2 x CAN (FD) 1 x LIN / K-Line

1 CAN (FD)

variable

(Piggy: *mag/*cap)

No. of D-SUB connectors 1 (dual channel) 2 (dual channel) 4 (single channel)

Time stamp accuracy

within one device 1 µs

sync. of multiple devices typ. 50 µs

with Sync cable not possible typ. 1 µs

Baudrates CAN up to 2 Mbit/s. CAN FD up to 8 Mbit/s. LIN up to 330 kbit/s.

With ST. min control in hardware for fast flashing (256Ch).

Recording functionality -- -- VN1630 log --

Mean reaction time 250 µs

Error frame / remote frame Bit-precise detection and generation

Operating system Windows 7/8 (32 and 64 bit), Windows 10 (64 bit)

External power supply VN1610/11/30A/40A: fully bus powered, no external power supply required; VN1630 log: 6 V .. 50V

PC interface USB 2.0 High-speed

Driver libraries XL Driver Library

Temperature range Operating: -40..+70 °C, storage: -40..+85 °C

Dimensions (LxWxH) [mm] 65 x 42 x 20 VN1630A: 90 x 110 x 35

Weight approx. 80 g VN1630A: approx. 230 g

Housing Robust plastic housing Highly robust aluminium housing

2 x CAN 1051cap --

2 x CAN (FD) --

0..2 x CAN (FD)

0..2 x LIN

0..2 x K-Line

0..2 x J1708

VN1630 log: 150 x 110 x 35

VN1630 log: approx. 400 g

0..4 x CAN (FD)

0..4 x LIN

0..2 x K-Line

0..4 x J1708

88 x 111 x 45

approx. 330 g

www.vector.com/contact

V2.3 | 2021-03