Vector vFlash User Manual
vFlash
Ethernet
DoIP
CAN FD
CAN
LIN
FlexRay
Flash
Data
vFlash
IP
ECU
FlexRay
LIN
Network Interfaces
SoAd
Flashing ECUs Easily and Quickly – over CAN, CAN FD, FlexRay, LIN or Ethernet
Diagnostics
What is vFlash?
vFlash is a very easy-to-use tool for programming ECUs.
It supports different flash specifications (= platform flash
bootloader) of more than 80 OEMs and is easily extendable via a plugin concept.
Overview of Advantages
Flexible
>
Flashing via all networks relevant for diagnostics: CAN,
CAN FD, LIN, FlexRay, Ethernet (DoIP, SoAd = AUTOSAR
Socket Adaptor)
>
“Out-of-the-box” support for several Flash specifications
from various OEMs
Easy
>
Easy exchange of preconfigured Flash projects in one
package (.vflashpack)
>
Quick and easy creation of flash projects for different
bootloaders, based on the vFlash templates
Fast
>
High transfer rate: Example: transfer of 1.000 kByte
data in 36,6 s (27,3 kByte/s) into an idealized reference
ECU over CAN at 500 kBit/s with STmin = 0, BS = 0
Complete
>
Support of various data formats
>
Interactive control via GUI or automated control via API
>
Remote software update/flashing from a distance
Highlights of Version 6
Security and DoIP Extensions
The Vector Security Manager is the link between the
Vector tools and OEM-specific security implementations.
>
vFlash now supports the Vector Security Manager.
This enables vFlash to authenticate itself to the
vehicle/ECU - according to different OEM-specific
implementations.
>
Based on the upcoming ISO standard 13400-3 for
DoIP, vFlash now optionally encrypts communication based on TLS.
Simplified Remote Flashing
>
Starting with vFlash Remote 6, the physical communication channel is simply assigned by the expert
and no longer manually by the specialist on the
vehicle side.
>
Useful for remote flashing: the erase and verification phases are now displayed in the progress bar.
>
The initial password for accessing the online service
can now be changed within vFlash.
>
A common remote access point is now available for
vFlash Remote and Indigo Remote. It allows both
flashing with vFlash Remote and performing vehicle
diagnostics with Indigo Remote.
Flashen of an ECU with vFlash
vFlash supports all diagnostic relevant networks
Fact Sheet vFlash
Further Improvements
>
Compatible exchange of projects also with previous
vFlash versions by saving as previous version
>
Flashing of data with more than 4.3 GByte or
addressing beyond the 4.3 GB limit is now possible
>
Support of the network-based communication
concept of the new Vector Ethernet network interfaces (e.g. VN5620)
>
Simply change communication parameters temporarily via the automation interface to flash identical
ECUs (e.g. in battery stacks) using a single vFlash
project
>
Proprietary ODX-F extensions such as swapping
Signatures to external files are now supported
Manufacturer Support Further Expanded
>
vFlash supports more than 130 different flash bootloaders (= specifications) from various vehicle
manufacturers via vFlash Templates, continuously,
new ones are added.
>
Communication via HKMC Ethernet communication
protocol “Eth Diag” is now possible
Further Functions
>
Flexible referencing of flashware in the development
phase for quick testing of made code changes or simple
exchange of preconfigured flash projects in a single
package
>
Tracing of the CAN communication for later analysis in
case of an error
>
Authentication based on the cross-tool applicable Security Manager sources from OEMs and suppliers
>
Protection of DoIP communication by means of TLS
(ISO13400-3).
>
Flexible extension of OEM flash sequences by so-called
“custom actions”, which are executed before and/or after
flashing
>
Direct “native” programming of data in Intel-Hex,
Motorola-S and binary format or alternatively programming based on container formats like ODX-F and manufacturer-specific formats
>
Documentation and quality assurance of flash actions in
flash reports using custom action
>
Encoding or data backup with data recovery using
custom actions
>
Flashing of compressed and encrypted data
>
Interactive flashing via the user interface and automated flashing via a programming interface (C API and
C# API), for process integration and integration into an
existing software environment
>
Validation of the flash bootloader in the ECU in combination with CANoe.DiVa (via CAN, FlexRay, DoIP, LIN)
>
Standalone flashing with the VN8810 intelligent diagnostic hardware
>
The “vFlash Station” variant enables simultaneous
flashing of several ECUs, each via a separate channel
>
Simultaneous flashing of several identical LIN ECUs
using “LIN Broadcast Flashing”
>
Remote flashing of ECUs from any location with vFlash
Remote - can also be used outside of a company
network
Application Areas
vFlash is designed for all users at automotive OEMs and
suppliers whose tasks include (re-)programming of ECUs.
vFlash allows users to flash ECUs in the laboratory, at
programming stations, at a laboratory vehicle or in the
vehicle very efficiently - even remote from a distance.
vFlash Bootloader Support
Vector offers prepared vFlash Templates for a large number
of different automotive OEMs and bootloaders.
Please contact us at: CANdela-Info@de.vector.com
Supported Hardware
>
CAN FD/LIN: e.g. VN16xx, VN8950, VN7572, VN8970,
VN8972, VN7640
>
CAN FD/FlexRay: e.g. VN7610, VN7572, VN8970, VN8972,
VN7640
>
Ethernet: e.g. VN5610A, VN5620, VN5640, VN7640,
VX0312
>
VN8810 (as standalone flash device)
>
VT System
More information: www.vector.com/vflash
www.vector.com/contact
V5 | 2019-8
Loading...