Vector VEC225 User Manual

TWO YEAR LIMITED WARRANTY REGISTRATION FORM

This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of
Vector Manufacturing, Ltd., regarding this product. There is no other warranty, other than those described herein.

This Vector Manufacturing, Ltd. product is warranted, to the original purchaser only, to be free of defects in materials
and workmanship for two years from the date of purchase without additional charge. The warranty does not
extend to subsequent purchasers or users. Vector Manufacturing, Ltd. will not be responsible for any amount of
damage in excess of the retail purchase price of the product under any circumstances. Incidental and conse­quential damages are specifically excluded from coverage under this warranty.

This product is not intended for commercial use. This warranty does not apply to accessories or damage to units
from misuse or incorrect installation. Misuse includes wiring or connecting to improper polarity power sources.

RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned postage prepaid
to Vector Manufacturing. Any defective product, other than accessories, that is returned to Vector Manufacturing
within 30 days of the date of purchase will be replaced free of charge. If such a product is returned more than
30 days but less than two years from the purchase date, Vector Manufacturing will repair the unit or, at its option,
replace it free of charge. If the unit is repaired, new or reconditioned replacement parts may be used, at Vector
ManufacturingUs option. A unit may be replaced with a new or reconditioned unit of the same or comparable
design. The repaired or replaced unit will then be warranted under the terms of the remainder of the warranty
period. The customer is responsible for the shipping charges on all returned items after 30 days. During the
warranty period, Vector Manufacturing, Ltd. will be responsible for the return shipping charges.

LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from
normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage or exposure
to sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized use or repair,
neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire, flood and Acts of God.

If your problem is not covered by this warranty, call our Technical Support Department at [phone] or toll
free at [phone] for general repair information and charges if applicable. You may also contact us through
our website at www.vectormfg.com.

STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on
how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the
exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal rights; other
rights, which vary from state to state, may apply.

TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Vector Manufacturing Technical Support
by telephone, fax or mail. We suggest that you keep the original packaging in case you need to ship the unit.
When returning a product, include your name, address, phone number, dated sales receipt (or copy) and a
description of the reason for return and product serial number. After repairing or replacing the unit, we will make
every effort to return it to you within four weeks.

WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing. Enter
VEC225 as Model. All Vector Manufacturing, Ltd. products must be registered within 10 days of purchase to
activate this warranty. Mail the completed registration form, along with a copy of the original sales receipt to:

ATTN.: CUSTOMER SERVICE / VECTOR MANUFACTURING, Ltd.

PH: 954-584-4446 • TOLL FREE: 866-584-5504 • Fax: [phone].

4140 SW 28th Way, Ft. Lauderdale, FL 33312

You may also contact us at our web site www.vectormfg.com

❑ Please activate my Limited Warranty for Model VEC225
❑ I have enclosed a copy of the original sales receipt.

Name ___________________________________________________________________________________
Street Address ________________________________________________________________________________
City __________________________________________________ State ________ Zip code _________________
Phone _____________________ Fax _____________________ E-mail __________________________________
Item Purchased ________________________________________________________________________________
Date of Purchase _____________________ Store Where Purchased ___________________________________
UPC Number from package (12 digits) ___________________________________________________________

Cut here

VEC225

MINI FRIDGE DELUXE

COOLER & WARMER

THERMOELECTRIC ADVANCED COOLING TECHNOLOGY

OPERATES FROM SUPPLIED AC/DC CONVERTER OR

ANY VEHICLE’S 12 VOLT ACCESSORY SOCKET

OWNER’S MANUAL &

WARRANTY INFORMATION

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING THE OPERATION AND WARRANTY
OF THIS PRODUCT. PLEASE READ CAREFULLY BEFORE USE AND RETAIN FOR FUTURE REFERENCE.

✄

4140 SW 28TH WAY, FT. LAUDERDALE, FL 33312

TEL: [phone] • FAX: [phone] • TOLL-FREE 866-584-5504

www.vectormfg.com

IMPORTANT SAFETY INFORMATION

COMPLETELY PORTABLE

Unit operates from AC/DC power converter - make sure AC is 110 volts, and 60 Hz

•

• This cooler/warmer is not a toy, keep it away from children

• Do not allow the cooler or AC/DC converter to become wet. Operate only in
a dry, well ventilated area

• This unit does not automatically turn on and off

• The interior of this unit gets quite hot in warming mode. Keep small children
from opening unit when warming

• Do not operate unattended for extended periods of time

• When operating from a vehicle battery, make sure you start your engine after
3-4 hours of operation to recharge the vehicle battery

• Do not overstuff cooling/heating chamber. Airflow between food containers
keeps temperature evenly distributed

• Allow airflow around fan area; blocking airflow will slow cooling or heating

INTRODUCTION

Thank you for choosing the Vector Mini Fridge Deluxe Cooler and Warmer, one
of the most advanced, state of the art units on the market today. Please read this
owner’s manual carefully before use to ensure optimum performance and avoid
damage to the unit itself or power sources from which it operates.
The Mini Fridge Deluxe Cooler and Warmer is compact, lightweight, and
portable. It provides convenient storage for cold or hot beverages and foods,
making conventional insulation-only coolers, thermal bottles, jars and insulated
chests obsolete.

FOR EXTENDED USE:

No need for a refrigerator. Simply plug the Mini Fridge Deluxe Cooler and
Warmer into converter's 12 Volt DC outlet or vehicle's 12 Volt DC accessory outlet
to keep food and drinks cold or warm. No more digging around in melting ice
and water for soggy foods and dripping drinks. No need for ice, dry ice, or cold/
hot packs. Ideal for use in a:

• Home or motel - use with the supplied AC/DC 110 volt converter

• Car

• Truck or SUV

• RV, mobile home, camper

• Boat

• At the beach, on picnics, at the campground - use with battery power

FOR SHORT-TERM USE AWAY FROM AC POWER:

When you have to leave the vehicle in the parking lot at the beach, park, campsite,
stadium or ballpark, simply plug the Mini Fridge Deluxe Cooler and Warmer into a
reliable cordless, rechargeable power supply, such as:

• Any Vector cordless, rechargeable Jumpstarter & 12 volt DC Power Supply

• The Vector cordless, rechargeable Pocket Power or Pocket Generator

Take the Mini Fridge Deluxe Cooler and Warmer with you, wherever you go,
to keep cold or hot food and drinks at just the right temperature. Ideal for use:

• At the office, for lunches and snacks

• In a motel, as a personal mini-fridge

• On the road, for refreshments on long journeys

• On camping and day trips, for cold or hot food and drinks

• At tailgate parties for cooked dishes, snacks or drinks

• At the beach, picnics or barbecues for cookout supplies - keeps meats and
condiments cool or prepared dishes hot

• Hold up to twenty one 12 oz. soda cans

IMPORTANT SUGGESTIONS

Vector’s Mini Fridge Deluxe Cooler and Warmer cools like a refrigerator and
warms like an oven. For best performance, plug in the unit approximately 2 hours
before loading to give it time to warm up or cool down. Always try to fill your unit
with pre-chilled or pre-heated food or beverages, as the unit will always perform at its
best when you do this. Generally, your unit will cool to approximately 40 °F. To
ensure optimum performance, always keep the unit out of direct sunlight when
running on the cold cycle. When the unit is running on the warm cycle, it will
warm to approximately 120 °F. On cold days, the unit will need more time to reach
the maximum warm temperature. Contact Technical Support at [phone] or
toll free at [phone] for further information.
The Mini Fridge Deluxe Cooler and Warmer can be used with most food and
beverages, either cold or hot. Use with standard household containers or ready-to-use
food and drink packaging. Ideal as a:

COOLER:

• Beverages - soda, beer, wine, juice, milk, iced tea or coffee, shakes, thirst
quenchers, water and more - in cans, bottles, cartons, pouches, sport bottles, etc.

• Food - salads, sandwiches, deli meats, hamburgers, hot dogs, meat or fish,
buns, condiments and dips, etc.

• Desserts - puddings, fruit cups, yogurts, etc.

• Snacks - fruit, candy, chocolate, cookies, fruit bars, chips, etc.

WARMER:

• Beverages - hot coffee and tea, cocoa, milk, etc.

• Food - leftovers, pre-packaged/pre-heated meals, take-out food, soups, covered
dishes, stews, casseroles, etc.

NOTE: When used with a rechargeable power supply, a full-charge on the
power source is recommended for optimum performance.

21