Vector VEC054D, VEC051D, VEC050D, VEC053D, VEC049D User Manual 2

VEC003

For models:
VEC049D
VEC050D
VEC051D
VEC053D
VEC054D
VEC056D

USER’S MANUAL

& WARRANTY INFORMATION

IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING
THE OPERATION AND WARRANTY OF THIS PRODUCT. PLEASE READ
CAREFULLY BEFORE USE AND RETAIN FOR FUTURE REFERENCE

4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312

Toll Free: [phone]

www.vectormfg.com

If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturer’s option. A unit may
be replaced with a new or reconditioned unit of the same or comparable design. The repaired or replaced unit
will then be warranted under the terms of the remainder of the warranty period. The customer is responsible for
the shipping charges on all returned items. During the warranty period, manufacturer will be responsible for the
return shipping charges to the customer in the United States.

LIMITATIONS: This warranty does not cover accessories, such as charging adapters, bulbs, fuses and batteries,
damage or defects resulting from normal wear and tear (including chips, scratches, abrasions, discoloration or
fading due to usage or exposure to sunlight), accidents, damage during shipping to our service facility, alterations,
unauthorized use or repair, neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire,
flood and Acts of God.

If your problem is not covered by this warranty, call our Technical Support Department at [phone] or toll
free at [phone] for general repair information and charges if applicable. You may also contact us through
our website at www.vectormfg.com.

STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on how long
an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the exclusions
or limitations stated herein may not apply. This warranty gives the purchaser specific legal rights; other rights,
which vary from state to state, may apply.

TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by telephone, fax or mail (see
below). We suggest that you keep the original packaging in case you need to ship the unit. When returning a
product, include your name, address, phone number, dated sales receipt (or copy) and a description of the reason
for return and product serial number. After repairing or replacing the unit, we will make every effort to return it
to you within four weeks.

WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing. Enter
“VEC003” as Model and “Inverter Remote Switch” as Product Type. All Vector products must be registered within
30 days of purchase to activate this warranty. Mail the completed registration form, along with a copy of the
original sales receipt, to:

ATTN.: CUSTOMER SERVICE

4140 SW 30th Ave., Ft. Lauderdale, FL 33312

• TOLL FREE: [phone] • FAX: [phone] •
WARRANTY IS NON-TRANSFERABLE.

BD011606

Inverter Remote

Switch

© 2006 VECTOR MANUFACTURING

MADE IN CHINA

VEC003_Manual_011606 1/26/06 3:32 PM Page 1

2. Plug the extension cord into the inverter’s Remote Control
Connection Port.

3. Operate the inverter as usual.

The pushbutton control and Power/Fault LED Indicators function exactly
as they do on the inverter. Refer to the inverter manual for further
operating information, load recommendations and specifications.

Note: The inverter’s ON/OFF Switch must be in the OFF position

before connecting the Remote Switch Plate and remain in the
OFF position. All ON/OFF function should be controlled by
the Remote Switch Plate.

CAUTION

ALWAYS turn the inverter OFF using the Remote Switch Plate before
disconnecting this unit from the inverter. Failure to do so will disable use
of the inverter’s ON/OFF function.

IMPORT ANT SAFETY INSTRUCTIONS

WARNING
TO REDUCE THE RISK OF INJURY, user must read and understand

this User’s Manual and the supplied documentation for the Inverter
and all devices to be used with the unit.

CAUTIONS

• This unit is NOT waterproof. DO NOT submerge it in liquids of any kind or use
it in the rain, snow or other wet conditions.

• Make sure the cord is placed so it is not tripped over or damaged by pinching,
abrading or cutting. Do not place it near moving objects, doors or sharp
objects, or expose it to extreme heat. Discontinue use if the cord is damaged.

• This is not a toy — keep away from children.

• Do not operate unit if there is any evidence of damage. To replace worn or
defective parts, contact Customer Service Department, toll-free, at [phone].

SAVE THESE INSTRUCTIONS

INTRODUCTION

Thank you for purchasing the

VEC003 Inverter Remote Switch

. The
Remote Power Switch allows Vector power inverters to be controlled
remotely.

FEATURES

• Power/Fault LED Indicators

• 20' cord with telephone-type connector

• Mountable Switch Plate

• Electronic pushbutton control

OPERATING THE UNIT

1. Position the Switch Plate, following the recommendations in the
“Important Safety Instructions.” The Switch Plate may be mounted
for convenience.

TWO YEARS LIMITED W

ARRANTY PROGRAM

This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities
of Vector Manufacturing, regarding this product. There is no other warranty, other than those described herein.
Any implied warranty of merchantability or fitness for a particular purpose on this product is limited in duration
to the duration of this warranty.

This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in materials
and workmanship for two years from the date of purchase without additional charge. The warranty does not
extend to subsequent purchasers or users. Manufacturer will not be responsible for any amount of damage in
excess of the retail purchase price of the product under any circumstances. Incidental and consequential damages
are specifically excluded from coverage under this warranty.

This product is not intended for commercial use. This warranty does not apply to damage to units from misuse or
incorrect installation/connection. Misuse includes wiring or connecting to improper polarity power sources.

RETURN/REPAIR POLICY: Defective products may be returned to manufacturer. Any defective product that is
returned to manufacturer within 30 days of the date of purchase will be replaced free of charge. If such a product
is returned more than 30 days but less than two years from the purchase date, manufacturer will repair the unit
or, at its option, replace it, free of charge.

continues

VEC003_Manual_011606 1/26/06 3:32 PM Page 3