PowerPlus
Steam
2000W – VPW2S
Powerful Pressure Washer with
Steam Cleaning Function
Pressure washer with a hygienic steam cleaning function
perfect for BBQs, garden furniture and more.
VPW2S
vax.co.uk
Let’s talk safety
Basic
safety
precautions
This pressure washer/steamer is intended for household use
only and NOT for commercial or industrial use.
• This pressure washer/steamer is for outdoor use only. Always
keep the area you are cleaning well lit.
• It is your responsibility to check the suitability of the surface to
be cleaned. Vax UK Ltd cannot be held responsible for
damage caused.
• Keep ngers, hair and loose clothing from moving parts and
openings whilst using the pressure washer/steamer.
• When using your pressure washer/steamer (pressure washer
function) the recommended working distance between the
nozzle and surface area or object to be cleaned is 30cm.
• Never touch the steam jet from a short distance (there is a
risk of scalding).
• This appliance can only be used by children aged from 8
years and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards
involved. Children should not play with the appliance. Cleaning
and user maintenance shall not be made by children without
supervision.
• Please refer to the surface manufacturer’s care
recommendations before use, and test your surfaces by
running the steam cleaner over a small hidden area, if no
damage occurs continue cleaning. Not suitable for use on
leather, wax polished surfaces, acrylic surfaces and synthetic,
velvet or steam/water sensitive materials - paint/outer of cars
or porous surfaces.
• Do not over saturate.
• Always wear suitable clothing footwear and eye protection
whilst using the pressure washer/steamer.
Do’s
• Always connect the water supply, remove the lance and
squeeze the trigger to run water through the machine
before switching the power on (pressure washer function).
• Always use a suitable hose connector to match the coupling
on the pressure washer/steamer with a non-return valve at
tap end of the supply hose.
• Always unplug the pressure washer/steamer before
cleaning or carrying out any maintenance.
• Always turn o and unplug the pressure washer/steamer
before disconnecting or connecting the hose/accessories
.After use always wrap the pressure hose and power cord
around the storage clips provided.
• Always release any built up pressure prior to disconnecting
the hose and ensure water inlet lter is clean prior to
storage in a cool dry place.
• Use only CE approved 13amp extension cords with RCD,
non-approved extension cords may overheat. Care should
be taken to arrange the extension cord as it could be a trip
hazard.
• Always make sure the power/extension cord is fully
unwound and prevent the power/extension cord from
getting wet during use.
• Always replace the fuse in the plug with a British 13amp
fuse. Always protect the power cable from heated surfaces
or near open ames.
• Always carry the pressure washer/steamer by the handle.
• Always check water hose and accessories are not damaged,
broken or worn before use.
• Always ll the water tank with water only, never add
perfume, and stain removers or products containing alcohol.
Don’ts
This steam cleaner should not be used to clean electrical
appliances. Always remove the mains plug from the socket
and allow the steam cleaner to cool down completely before
topping up with water
• Don’t leave the pressure washer/steamer unattended or
running when not in use for more than 5 minutes without
depressing the trigger.
• Don’t use this pressure washer/steamer if it has been
dropped, damaged or immersed in water.
• Don’t use pressure washer/steamer if the power cord or plug
is damaged. Please contact our Customer Care Line on:
0330 026 8455 (Mon-Fri 8:30am to 6:30pm,
Sat 9:00am to 5:00pm).
• Don’t handle the plug of the pressure washer/steamer
with wet hands.
• Don’t use the pressure washer/steamer without supply hose
(minimum length 7.5m) in place and unwind the hose fully
from reel.
• Don’t use the pressure washer/steamer without the water
lter in place.
• Don’t pull or carry this pressure washer/steamer by the power
cord. Don’t use the power cord as a handle, pull the power
cord around corners or sharp edges or close a door over the
power cord. Don’t unplug pressure washer/steamer by pulling
on the power cord.
• Don’t aim the pressure washer jet or steam jet at people,
animals, plants, electrical components, wires, or the pressure
washer/steamer itself. Never touch the pressure/steam jets
(there is a risk of injury/scalding).
• Don’t use the pressure washer/steamer on electrical components, damaged/
delicate paint surfaces, tyres, engines/motors.
• Don’t use the pressure washer/steamer with incorrect voltage as this may
result in damage or injury to the user. The correct voltage is listed on the
rating label.
• Don’t touch any hot areas/accessories on the steam cleaner. It’s normal for
the steam cleaner and accessories to heat up during use, always allow them
to cool down before handling or changing.
• Don’t over ll the clean water tank or exceed the maximum amount
required as the steam cleaner will deliver water droplets or very little steam.
Thank you for buying this PowerPlus Steam.
Taking care of your outdoor cleaning
This pressure washer is designed to make outdoor cleaning tasks as eective and ecient
as possible and this user guide will help you get the most out of your machine.
Completing outdoor cleaning tasks using a Vax pressure washer will keep your outdoor items
and surfaces cleaner for longer.
Taking care of your PowerPlus Steam pressure washer
Also inside this guide are instructions on maintaining your new machine, so that it’s always ready
when you are to tackle your outdoor cleaning tasks.
Taking care of you
We’re here if you need us. Instead of taking me back
to the shop, simply visit:
vax.co.uk/support or call:
(UK) 0330 026 8455 (ROI) 1-800 928 308
Monday-Friday 8.30am to 6.30pm, Saturday 9.00am to 5.00pm
Calls are charged at the UK local rate. Please make a note of the serial number and model number
of the product before calling.
Alternatively, you can write to us at:
Vax Ltd., Plot 302, Stonebridge Cross Business Park, Hampton Lovett, Droitwich, WR9 0LW, UK
This User Guide can be found online at: vax.co.uk/support
Let us know what you think @VaxUK
Contents
Let’s talk safety
VPW2S
Included with
your machine
Getting to know your machine
Getting started
Using your machine
Taking care of your machine
Let’s talk technical
What to do if it goes wrong
Getting in touch
Accessories
Pressure hose
Trigger handle
Lance
Jet nozzle
(Orange nib)
Turbo nozzle
Notes
Solution nozzle
(Black/White nib)
Steamer brush
Nozzle cleaning tool
Handle
Trigger handle
storage
Steamer
handle
Getting to know your machine
Steamer water
supply tube
(Not shown)
Pressure hose
storage hook
Steamer hose
Water outlet
Technical Specication
Name VPW2S
Voltage 220-240V~50Hz
Wattage 2000W
Cord length 5m
Weight 6.5kg
Solution intake tube
Water inlet connector
(Already installed)
Accessories & Consumables
Universal Detergent
1-9-133398-00
Patio & Decking detergent
1-9-133401-00
Steam Brush x3
1-1-135755-00
Wash & Protect
Vehicle Detergent
1-9-133400-00
On/O switch
and Water lter
Subject to technical change without notice.
*To purchase consumables and accessories, please visit vax.co.uk
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
CAUTION: Always make sure the trigger safety lock is in the ‘locked’ position when not in use or
connecting/disconnecting the pressure hose. Always check water hose, pressure hose, lance and nozzle
are not damaged, broken or worn before use.
CAUTION: The pressure washer/steamer is equipped with a thermal cut-out. If for any reason the pressure
washer/steamer does overheat the device will automatically turn the unit o. If this happens switch the
pressure washer/steamer o and unplug from the mains. Remove the lance, nozzle and lter and check for
blockages. Allow the pressure washer/steamer to cool down for approximately 4 hours.
Preparing your pressure washer/steamer
Getting started
Push the pressure hose connector
rmly into the water outlet and turn
the pressure hose collar clockwise
until tight.
Press the pressure hose release button
located on the side of the trigger
handle. Holding the button down,
push the pressure hose into the hose
connection underneath the button.
A trigger safety lock is located underneath
the handle. The safety lock should always
be in LOCKED position before connecting/
disconnecting the pressure hose to the
trigger handle.
Release the button, continue to rmly push
the pressure hose into the trigger handle.
The release button will pop out when the
pressure hose is correctly tted. Gently
pull the pressure hose to make sure it is
securely locked.
Using your machine
IMPORTANT: Always use an RCD (Residual Current Device) adaptor when using the pressure washer.
CAUTION: Never aim the high pressured water jet at people, animals, plants, electrical components,
wires or the pressure washer/steamer itself.
Make sure the water supply is not on.
Firmly push the water hose pipe with
suitable connector onto the water
inlet, lock into place.
Before plugging the pressure washer/
steamer into the mains supply, press
the safety button on the trigger handle
to ‘unlock’ and squeeze the trigger
until water starts to ow through
the nozzle.
Connect the water hose pipe to a
suitable water supply and turn the
water on.
‘Lock’ the safety button on the trigger
handle. Firmly push the lance into
trigger handle, turning clockwise
until locked into place.
After connecting pressure hose, lance and accessories check they are securely tted and
locked into place before switching the pressure washer/steamer on.
TIP
Using your machine
Choose an accessory nozzle. Firmly
push nozzle into the lance until it
clicks and locks into place. Gently pull
the nozzle to make sure it is locked
and secure before use.
Push the On/O switch to ‘I’ position
to switch on. The machine will run for
a few seconds then stop, no water will
be released.
Connect the power cord to the mains
supply via the RCD adaptor.
Squeeze the trigger on the trigger handle to release a
high pressured water jet.
Using your machine
IMPORTANT: The lance and accessory nozzle must be attached to the trigger handle for pressurised
water to be produced.
CAUTION: Always make sure the pressure washer/steamer is switched o and the safety button on the
trigger handle is in the locked position before connecting/disconnecting the lance, nozzles or accessories.
Using your accessories
Firmly push the chosen accessory
nozzle into the lance until it clicks and
locks into place. Gently pull the nozzle
to make sure it is locked and secure
before use.
Jet nozzle (Orange nib)
The jet nozzle has a wider spray and
is ideal on surfaces such as cars,
garden furniture, decking and boats.
Turbo nozzle
The turbo nozzle has a more
concentrated spray and is ideal for
use on very dirty surfaces, patios or
masonry. It is not suitable for use on
delicate or painted surfaces.
Using solution with your pressure washer/steamer
Unhook the solution tube and insert
into solution bag. Always make sure
the solution tube is fully submerged
into the solution/water mix inside the
solution bag.
IMPORTANT: When using solution only use Vax solution and make sure you follow the dilution instructions.
Solution can only be dispensed when low pressure accessories such as the solution nozzle, (brush and rotary brush
is attached – (supplied with certain models only). Solution cannot be used with jet or turbo nozzles.
Attach the solution nozzle
(white/black nib) to lance, making
sure it is locked and secure
before use.
After using solution, rinse fresh water
through your pressure washer/steamer
to prevent blockages. Insert the solution
tube into a bucket of fresh water (Max
40˚C), turn the pressure washer/steamer
on and squeeze the trigger for 1 minute.
Using your machine
IMPORTANT: Please refer to the surface manufacturer’s care recommendations before use. Test your surfaces by
running the steam cleaner over a small hidden area, if no damage occurs continue cleaning. Not suitable for use on
leather, wax, polished surfaces, acrylic surfaces, synthetic, velvet or steam/water sensitive materials - paint/outer
surfaces of cars or porous surfaces. Please refer to oor manufacture’s care recommendations before us, and test
your ooring by running the steamer over a small hidden area if no damage occurs continue cleaning. The steam
cleaner should not be used to clean electrical appliances, electrical heating systems, oven surfaces or grills when
hot etc.
Excessive temperature dierences between the glass window and the steam can break the window, Do not use with
extreme outside temperatures to avoid stressing the glass surface.
Using the steam cleaner
A trigger safety lock is located
underneath the steamer handle.
The safety lock should always be in
‘Locked/O ‘ position before setting
up the steamer or connecting/
disconnecting accessories to the
steamer nozzle.
Replace water tank cap and insert
steamer water supply tube into the
hole in cap. Make sure the steam/
water supply tube is fully submerged
into the water tank and into the water.
Lift and remove the water tank cap. Fill water tank, leaving a small gap at
The steamer can be used directly
through the nozzle.
the top of the tank. Don’t use hot or
boiling water to ll or clean water tank.
Push steamer brush rmly onto the
steamer nozzle to attach. Make sure
the steamer brush is secured into place
before turning on.
Using your machine
1 Minute
Plug in the power cord to the mains
supply via the RCD adaptor.
Press the safety lock on the steamer
handle to ‘ON’ and squeeze
the trigger.
Push the On/O switch to ‘II’ position
to switch on.
Squeeze the trigger in short bursts.
Don’t hold the trigger continuously to
prevent over wetting.
Allow 1 minute for the steamer to
warm up.
Taking care of your machine
IMPORTANT: If using the pressure washer/steamer with water from a water butt, the water lter will require more
frequent cleaning.
Cleaning water lter
Unscrew and remove water inlet
connector.
Rinse water lter to remove any dirt
or debris.
Using pliers gently pinch and pull the
inner water lter tab and remove.
Taking care of your machine
IMPORTANT: Before storing your pressure washer/steamer always make sure no water remains in the pressure
washer/steamer, hose, lance, nozzle and water tank. Once the pressure washer/steamer is switched o and before
removing the lance, nozzle or trigger handle always squeeze the trigger until no further water is released, to prevent
frost damage. Keep in a dry place above zero degrees and out of the reach of children.
Storing your pressure washer/steamer
Squeeze the trigger on the steamer
handle until the water tank is
completely empty.
To release pressure hose, press the
pressure hose release button and pull
pressure hose to remove.
Before removing pressure hose, lance and nozzle always squeeze trigger until water stops
releasing pressure build up.
TIP
To remove the nozzle from the lance,
press the nozzle release button on
lance and pull nozzle.
Always store tools, power cord and
pressure hose into allocated
storage slots.
To remove the lance from the trigger
handle, rmly push and twist the
lance anti-clockwise. When unlocked
pull to remove.
CAUTION: Before carrying out any maintenance make sure the pressure washer/steamer is
switched o and unplugged from the mains.
Removing a blockage from the lance and nozzle
Let’s talk technical
To remove the nozzle from the lance,
press the nozzle release button on
lance and pull nozzle.
Remove the lance from the trigger
handle, rmly push and twist the
lance anti-clockwise. When unlocked
pull to remove.
Removing a blockage from the steamer nozzle
Pull steamer brush to remove. Insert nozzle cleaning tool into end of
steam nozzle to remove any dirt and
debris.
Insert nozzle cleaning tool into end
of nozzles to remove any dirt
and debris.
What to do if it goes wrong
There is an
accessory missing.
SolutionProblem
• Check the ‘This pack contains’ panel on the box to make sure the
part is included with your machine.
Why won’t my pressure
washer/steamer turn on?
Why won’t the pressure
washer/steamer dispense?
• Make sure the On/O switch is set to the
(pressure washer) ‘II’ position (steamer).
• If the trigger has not been squeezed the pressure washer/steamer
will be silent, to activate squeeze the trigger handle (pressure
washer function).
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace
with a British 13amp fuse.
• Check the RCD has not been tripped.
• The thermal protector may have tripped. If this happens switch the
pressure washer/steamer o and unplug from the mains.
• Remove the lance, nozzle and lter and check for blockages.
(pressure washer function).
• Remove the steam tool and check for blockage (steamer function)
Allow the pressure washer/steamer to cool down for
approximately 4 hours.
• The power cord maybe damaged. Please contact our
Please contact our Customer Care Line on: 0330 026 8455
(Mon-Fri 8:30am to 6:30pm Sat 9:00am to 5:00pm).
• The pressure washer pump may have stopped, make sure the
On/O switch is set to the
• The pump may have stopped and the thermal protector activated,
this may be because of overheating due to poor water supply.
Dissconnect the power and allow the pressure washer/steamer to
cool down for approximately 4 hours.
• Hose may be blocked or kinked, check for leaks in the hose and clear
any blockages. Straighten out the hose to ensure no kinks and check
the hose pipe connections to the tap and water inlet.
• There may be an air lock. Press the unlock safety button on the
trigger handle and squeeze the trigger to release water before the
pressure washer/steamer is switched on.
• Check the assembly of the solution tube and bag. Go to
‘Using your machine’.
• Nozzle/accessory may be blocked, clear any blockages and clean
with nozzle cleaning tool. Go to ‘Lets talk technical’.
• The turbo/jet nozzle is attached, remove and attach solution nozzle.
• No solution will be released when using the turbo/jet nozzle. Go to
‘Using your machine’.
‘I’ position and check the plug fuse.
‘I’ position
Why won’t my pressure
washer/steamer reach
operating pressure?
Why wont my pressure
washer/steamer produce
any steam?
What to do if it goes wrong
• Lance and nozzle not attached. The lance and nozzle must be
attached to the trigger handle for pressurised water to be produced.
• Hose may be blocked or kinked, check for leaks in the hose and clear
any blockages.
• Straighten out the hose to ensure no kinks and check the hose pipe
connections to the water supply and water inlet.
• Lance and nozzle may be blocked, clear any blockages and clean
with nozzle cleaning tool. Go to ‘Lets talk technical’.
• Remove and clean the water inlet lter. Go to ‘Taking care of
your machine’.
• Check the water ow rate to your water supply.
• Tank maybe empty. Turn o, allow to cool for 10 minutes, rell and
make sure that water is being drawn through the steamer water
supply tube from the tank without air bubbles. If there is a bubble air
locking the pipe then squeeze the pipe towards the tank to remove it.
• Check the assembly of the water supply tube into the water tank. Go
to ‘Using your
• The water may not yet be at temperature, allow heat up time. Cold
water may take longer to heat.
• Check the On/O switch has been set to the
Go to ‘Using your machine’.
• Remove safety lock and press trigger on steamer gun.
• Steam path is blocked. Go to ‘Removing a blockage from the
lance and nozzle’.
machine’.
‘II’ position.
Getting in touch
†
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the pressure washer before calling.
†
Registration required. Terms and conditions apply, see vax.co.uk for details.
Accessories
Accessories
Don’t forget your accessories!
Order at: www.vax.co.uk/spares-and-solutions
Universal detergent 1-9-133398-00
Universal detergent to aid the break down and removal of stubborn dirt, moss, and grime.
Patio & Decking detergent 1-9-133401-00
Patio & decking detergent to aid the break down and removal of stubborn dirt from patio
and decked areas.
Wash & Protect vehicle detergent 1-9-133400-00
Wash & protect vehicle detergent to aid the removal of road dirt, oil and grease from vehicles,
and provide short term protection against weathering conditions.
Standard lance 1-9-133749-00
Standard lance connection between your trigger handle and attachments.
Detergent nozzle 1-9-133759-00
A detergent nozzle to directly apply detergent to surfaces to help loosen dirt, moss, and grime.
Attachable detergent bottle 1-2-133752-00
A detergent nozzle to directly apply detergent to surfaces to help loosen dirt, moss, and grime.
Trigger handle 1-2-133750-00
A smooth shape hand handle with an easy squeeze trigger and a built in safety lock for easy
on/o trigger release.
Accessories
Jet nozzle 1-9-133754-00
Jet nozzle to apply concentrated pressure to dislodge dirt and grime on all surface types.
Turbo nozzle 1-9-133753-00
A high pressure turbo nozzle to blast away tough embedded dirt from high trac areas.
Patio cleaning set 1-9-133767-00
A large circular cased brush, supplied with an extension tube for cleaning concentrated areas
quickly and eciently. Ideal for: Patios, Decking, Driveways, Garage doors.
Rotary brush 1-9-133766-00
A rm bristled brush with 360 degree rotation, providing extra scrub power for an extra clean.
Ideal for: Car alloy wheels, Car grills.
Car brush 1-9-133765-00
A soft bristled brush, perfect for agitating tough dirt from sensitive surfaces.
Ideal for: Car mirrors, Car body.
Outdoor brush 1-9-133769-00
A handy outdoor brush, perfect for gently removing dirt from various outdoor surfaces.
Ideal for: Garden furniture, Conservatories.
Extension bar 1-9-133768-00
An additional connection tube providing you extra reach.
Replacement hose (10m) 1-9-133751-00
An additional high pressure hose, highly durable and resistant to weather conditions.
Notes
@VaxUK
Vax Ltd, 5th Floor 2 Colmore Square, 38 Colmore Circus, Queensway, Birmingham, B4 6BN, UK
email: info@vax.co.uk website: vax.co.uk
EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility,
declare that the VPW2S is manufactured in compliance with the following Directives:
Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
© 2014 All rights reserved. VAX®, VAX Lozenge, are trade marks or registered trade marks of Techtronic Floor Care Technology Ltd.
Loading...