COMPACT AND
LIGHTWEIGHT FOR
OUTDOOR CLEANING
LET’S GET STARTED.
VPW1
Let’s talk safety
This pressure washer is intended for household use only and
NOT for commercial or industrial use.
• This pressure washer is for outdoor use only.
Basic
safety
precautions
Don’ts
• It is your responsibility to check the suitability of the surface to be
• Keep ngers, hair and loose clothing from moving parts and
• When using the pressure washer the recommended working
• Don’t leave the pressure washer unattended or running when not
in use for more than 5 minutes without depressing the trigger.
• Don’t use the pressure washer if it has been dropped, damaged
or immersed in water.
• Don’t use the pressure washer if the power cord or plug is
damaged.
• Don’t handle the plug of the pressure washer with wet hands.
• Don’t use the pressure washer without the supply hose
(minimum length 7.5m) in place and unwind the hose fully
from reel.
• Don’t use the pressure washer without the water lter in place.
PLEASE KEEP THESE ORIGINAL INSTRUCTIONS.
cleaned. Vax UK Ltd cannot be held responsible for damage caused.
openings whilst using the pressure washer.
distance between the nozzle and surface area or object to be
cleaned is 30cm.
Do’s
• Always wear suitable clothing, footwear and eye protection
whilst using the pressure washer.
• Always connect the water supply, remove the lance and squeeze
the trigger to run water through the machine before switching
the power on.
• Always use a suitable hose connector to match the coupling
on the pressure washer with a non-return valve at the tap end
of the supply hose.
• Always unplug the pressure washer before cleaning or carrying
out any maintenance.
• Always turn o and unplug the pressure washer before
disconnecting or connecting the hose. After use always
wrap the pressure hose and power cord around the storage
clips provided.
• This appliance can only be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children should not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• Vax only recommend the use of Vax genuine accessories and solution to be
used with this pressure washer. The use of non-branded Vax accessories and
solution will invalidate your warranty.
• For safe transportation, ensure that the pressure washer is unplugged
and secure.
• Don’t pull or carry the pressure washer by the power cord.
• Don’t use the power cord as a handle, pull the power cord around corners or
sharp edges, or close a door over the power cord.
• Don’t unplug the pressure washer by pulling on the power cord.
• Don’t aim the pressure washer at people, animals, plants, electrical components,
wires, or the pressure washer itself.
• Don’t use the pressure washer on electrical components, damaged/delicate
paint surfaces, tyres, engines/motors.
• Don’t use the pressure washer with incorrect voltage as this may result in
damage or injury to the user. The correct voltage is listed on the rating label.
• Always release any built up pressure in the handle prior to disconnecting
the hose and ensure the water inlet lter is clean prior to storage in a cool
dry place.
• Always use only CE approved 13amp extension cords with RCD, non-approved
extension cords may overheat. Care should be taken to arrange the extension
cord as it could be a trip hazard.
• Always make sure the power/extension cord is fully unwound and prevent the
power/extension cord from getting wet during use.
• Always replace the fuse in the plug with a British 13amp fuse.
• Always protect the power cable from heated surfaces or near open ames.
• Always carry the pressure washer by the handle.
• Always check the water hose and accessories are not damaged, broken or
worn before use.
Thank you for buying this Pressure Washer.
Taking care of your outdoor cleaning
This pressure washer is designed to make outdoor cleaning tasks as eective and ecient
as possible and this user guide will help you get the most out of your machine.
Completing outdoor cleaning tasks using a Vax pressure washer will keep your outdoor
items and surfaces cleaner for longer.
Taking care of your Pressure Washer
Also inside this guide are instructions on maintaining your new machine, so that it’s always
ready when you are to tackle your outdoor cleaning tasks.
We’re here if you need us
Instead of taking me back to the shop,
simply visit our online support:
vax.co.uk/support
Still need to get in touch?
Our UK based Customer Care Team are here to support you.
For help with assembly, operational or performance problems, or buying and tting new accessories,
you can nd all our contact details at vax.co.uk/contact
This user guide can be found online at: vax.co.uk/support
Contents
Let’s talk safety
Power Wash
Included with
your machine
Getting to know your machine
Getting started
Using your machine
Taking care of your machine
Let’s talk technical
What to do if it goes wrong
Getting in touch
Accessories
Pressure Hose
Trigger Handle
Lance
Jet Nozzle
(orange nib)
Turbo Nozzle
Detergent Application Bottle
Nozzle Cleaning Tool
Water Inlet Connector
Getting to know your machine
Handle
Pressure hose and
power cable storage
hook
Lance storage
On/o switch
Trigger handle
storage
Water outlet
Technical Specication
Name PowerWash
Model VPW1
Voltage 220-240V
Wattage 1800W
Max Pressure 130 bar
Rated Pressure 90 bar
Max Flow Rate 370L/hr
Sound pressure level:
LpA dB(A) 74
Sound power level:
LwA dB(A) 93
LwA dB(A) K (uncertainty) 92
Vibration (m/s
Subject to technical change without notice.
2
) K (uncertainty) 0,5 m/s2 1.5
Nozzle storage
Solution bottle
storage
Water inlet
connector
Wheel
Accessories & Consumables
Universal Detergent
1-9-133398-00
Patio & Decking Detergent
1-9-133401-00
Wash & Protect Vehicle Detergent
1-9-133400-00
To purchase consumables and accessories, please visit vax.co.uk
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE.
Assembling your pressure washer
Getting started
Attach both wheels and push until
they click into place.
Always make sure the pressure washer and water supply is o before
connecting or disconnecting the hose and accessories.
IMPORTANT: Always make sure the trigger safety lock is in the LOCKED
position when not in use or connecting/disconnecting the pressure hose.
Always check water hose, pressure hose, lance and accessories are not
damaged broken or worn before use.
Attach the hose connector to water
inlet by turning clockwise until tight.
Preparing your pressure washer for use
UNLOCKED
LOCKED
Push the pressure hose rmly to the
water outlet and turn the pressure
hose collar clockwise until tight.
A trigger safety lock is located
underneath the handle. The safety
lock should always be in LOCKED
position before connecting/
disconnecting the pressure hose
to the trigger handle.
After connecting
pressure hose, lance
and accessories check
they are securely tted
and locked in place
before turning on.
TIP
To connect pressure hose to trigger
handle, press the pressure hose
release button and push pressure
hose to lock into position. Gently pull
the pressure hose to make sure it is
locked securely.
Whilst rmly pushing the lance into
the trigger handle turn clockwise to
lock into position.
To remove the lance from the trigger
handle rmly push and twist the lance
anti-clockwise. When unlocked pull
to remove.
Using your machine
IMPORTANT: Always use an RCD (Residual Current Device) adaptor when using this pressure washer.
Make sure water supply is not
connected. Firmly push the
water hose pipe with suitable
connector onto the water inlet
to lock into position.
Connect the power cord to the mains
supply via an RCD adaptor.
Connect water hose pipe to a suitable
water supply and turn water on.
Push switch to ‘I’ position to turn
on. The machine will run for a few
seconds then stop but no water will
be released.
Before plugging the machine in, press
the unlock safety button on the trigger
handle and squeeze the trigger until
water starts to ow through the nozzle.
Squeeze the trigger on the trigger
handle to release a high pressured
water jet, and start cleaning.
Push switch to ‘O’ position to turn o.
Don’t aim the pressure
washer directly at people,
animals, plants, electrical
components, wires or the
pressure washer itself.
CAUTION
Using your machine
IMPORTANT: Always make sure the machine is switched o and the safety button on the trigger handle is LOCKED
before connecting/disconnecting the lance, nozzle or accessories.
Jet nozzle has a wider spray and is ideal for use on surfaces areas such as cars, garden furniture, decking and boats.
Using your accessories
To attach the jet nozzle, t the lance
with a rm push and twist clockwise
to lock into place.
Turbo nozzle has a more concentrated spray and is ideal for use on very dirty surfaces, patios or masonry. As it is not
tted with a pressure regulator it is not suitable for use on delicate or painted surfaces.
To attach the turbo nozzle, t the
lance with a rm push and twist
clockwise to lock into place.
Hold down the release button on the
lance, push the jet nozzle and lance
rmly together until you hear an
audible CLICK. Release the button
and gently pull the jet nozzle to make
sure it is locked securely before use.
Hold down the release button on
the lance, push the turbo nozzle and
lance rmly together until you hear an
audible CLICK. Release the button and
gently pull the turbo nozzle to make
sure it is locked securely before use.
Squeeze the trigger on the trigger
handle to release a high pressured
water jet, and start cleaning.
Squeeze the trigger on the trigger
handle to release a high pressured
water jet, and start cleaning.
Never use the turbo nozzle
on cars, tyres and engines.
CAUTION
Using your machine
IMPORTANT: When using solution make sure you follow the dilution instructions and use Vax solution only.
IMPORTANT: Solution can only be used with the jet nozzle.
Using solution with your pressure washer
Fill the solution application bottle with
the diluted solution mix. Turn the lid
clockwise to lock.
To remove or rell, lift the locking tab
to release the solution application
bottle from the jet nozzle.
Push the solution application bottle
onto the lance tted with jet nozzle
until you hear an audible click. Gently
pull the bottle to make sure it is locked
securely before use.
Switch the pressure washer on and
squeeze trigger to dispense the water
and solution mix.
Always rinse fresh water
through your pressure
washer for 1 minute
after using solution to
prevent blockages.
TIP
Taking care of your machine
IMPORTANT: Always rinse fresh water through your pressure washer and accessories for 1 minute after using
solution to prevent blockages.
Maintenance
To access water lter unscrew water
inlet connector and remove.
IMPORTANT: Before storing your machine always make sure no water remains in the pressure washer or hose/
accessories to prevent frost damage. Keep in a dry place above zero degrees and out of the reach of children.
To remove water lter, pinch the
inner water lter tab with pliers
and gently pull.
Water lter can be rinsed under
running water periodically.
Storage
Always store tools/cable/solution tank into allocated slots.
Let’s talk technical
Removing a blockage in the lance and nozzles
To remove the lance from trigger
handle rmly push and twist the
lance anti-clockwise, when
unlocked pull to remove.
CAUTION
Before carrying out any maintenance make sure the machine is switched o and unplugged.
To remove the nozzles press the
nozzle release button and pull.
Insert the nozzle cleaning tool into the
end of lance and nozzles to remove
any dirt or debris.
What to do if it goes wrong
SolutionProblem
• Check the ‘This pack contains’ panel on the box to make sure the part
is included with your machine.
There is an
accessory missing
• Make sure the on/o switch is set to the ‘I’ position.
• The plug may not be fully pushed into the electrical socket.
Why won’t the pressure
washer turn on?
Why won’t the water
/detergent dispense?
• Check the fuse in the plug if this needs replacing, always replace with
a British 13amp fuse.
• Check if your RCD has been tripped, if it has tripped, reset it.
• The power cord may be damaged.
• The pump may have stopped, make sure the on/o switch is set to the
‘I’ position and check the plug fuse.
• The pump may have stopped. This may be because of overheating due
to poor water supply. Check the water ow rate to your water supply.
• Hose may be blocked or kinked, check for leaks in the hose and clear
any blockages. Straighten out the hose to ensure no kinks and check
the hose pipe connections to the tap and water inlet.
• There may be an air lock. To remove, unlock the trigger safety lock
and squeeze the trigger to release water before the machine is
switched on.
• Check assembly of solution application bottle Go to the ‘Using
your machine’ pages. Nozzle/accessory may be blocked, clear any
blockages and clean nozzle Go to the ‘Lets talk technical’ page.
Why won’t the
pressure washer reach
operating pressure?
• Hose may be blocked or kinked, check for leaks in the hose and clear
any blockages. Straighten out the hose to ensure no kinks and check
the hose pipe connections to the tap and water inlet.
• Nozzle may be blocked, clear any blockages and clean nozzle.
Go to the ‘Lets talk technical’ page.
• Remove and clean the water inlet lter Go to the ‘Taking care of your
machine’ page.
• Check the water ow rate to your water supply.
Getting in touch
†
Registration required. Terms and conditions apply, see vax.co.uk for details.
Accessories
Don’t forget your accessories!
Order at: www.vax.co.uk/spares-and-solutions
Universal detergent 1-9-133398-00
Universal detergent to aid the break down and removal of stubborn dirt, moss, and grime.
Patio & Decking detergent 1-9-133401-00
Patio & decking detergent to aid the break down and removal of stubborn dirt from patio
and decked areas.
Wash & Protect vehicle detergent 1-9-133400-00
Wash & protect vehicle detergent to aid the removal of road dirt, oil and grease from vehicles,
and provide short term protection against weathering conditions.
Standard lance 1-9-133749-00
Standard lance connection between your trigger handle and attachments.
Detergent nozzle 1-9-133759-00
A detergent nozzle to directly apply detergent to surfaces to help loosen dirt, moss, and grime.
Attachable detergent bottle 1-2-133752-00
A detergent nozzle to directly apply detergent to surfaces to help loosen dirt, moss, and grime.
Trigger handle 1-2-133750-00
A smooth shape hand handle with an easy squeeze trigger and a built in safety lock for easy
on/o trigger release.
Jet nozzle 1-9-133754-00
Jet nozzle to apply concentrated pressure to dislodge dirt and grime on all surface types.
Turbo nozzle 1-9-133753-00
A high pressure turbo nozzle to blast away tough embedded dirt from high trac areas.
Patio cleaning set 1-9-133767-00
A large circular cased brush, supplied with an extension tube for cleaning concentrated areas
quickly and eciently. Ideal for: Patios, Decking, Driveways, Garage doors.
Rotary brush 1-9-133766-00
A rm bristled brush with 360 degree rotation, providing extra scrub power for an extra clean.
Ideal for: Car alloy wheels, Car grills.
Car brush 1-9-133765-00
A soft bristled brush, perfect for agitating tough dirt from sensitive surfaces.
Ideal for: Car mirrors, Car body.
Outdoor brush 1-9-133769-00
A handy outdoor brush, perfect for gently removing dirt from various outdoor surfaces.
Ideal for: Garden furniture, Conservatories.
Extension bar 1-9-133768-00
An additional connection tube providing you extra reach.
Replacement hose (10m) 1-9-133751-00
An additional high pressure hose, highly durable and resistant to weather conditions.
Notes
Notes
Notes
Vax EU Declaraon of Conformity (DoC)
Date of Issue: 01.01.2017
2006/95/EC, 2006/42/EC, 2004/108/EC,
Direcves:
Conforming Apparatus: VPW1
Manufacturer: Vax Ltd
Harmonised Standards Referenced or Applied:
2000/14/CE (2005/88): The appliance is dened at no27 of the annex I.
Conformity evaluaon procedure according to annex V.
Measured acousc power level LwA: 92 dB(A)
Guaranteed acousc power level LwA: 93 dB(A)
2000/14/EC (2005/88/EC), 2014/30/EU,
2011/65/EU
EN60335-1; EN60335-2-79:2012;
EN62233:2008;
EN55014-1:2006+A1:2009+A2:2011
EN55014-2:1997+A1:2001+A2:2008;
EN61000-3-2:2006+A1:2009+A2:2009;
EN61000-3-3:2008;
Vax Ltd hereby declare that the equipment name has been designed (alternave:) tested
and found to comply with the relevant secons of the above referenced specicaons.
The unit complies with all essenal requirements of the Direcves.
This Declaraon is issued under sole legal responsibility of Vax Ltd.
Signed:
Name: Rob Atkins
Posion: Vice President of Operaons
GET IN TOUCH
info@vax.co.uk vax.co.uk
EU Statement of Compliance: Manufacturer/EU importer: Vax Limited, hereby on our own responsibility, declare that the
VPW1 is manufactured in compliance with the following Directives: Safety: 2006/42/EC Machinery Directive.
EMC: 2014/30/EU Electromagnetic Compatibility Directive.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
© 2017 Vax Limited. All rights reserved. The VAX trade mark and Vax lozenge are the property of Techtronic Floor Care
Technology Ltd and are registered in the EU and may be pending or registered in other countries.
Machine not suitable
for connection to the
potable water mains
Loading...