Vax V-084 Instruction Manual

Vax Careline:
0870 6061248

Instruction Manual

Please read carefully before using

the cleaner. Always fully extend

the mains cable before use.

Please retain these instructions

for future reference.

www.vax.co.uk

Handheld Steamer
Vax Model Number: V-084

V-084 User Guide.qxd 6/6/06 12:32 pm Page 2

1. Diagram

Parts Overview

2

1. Upholstery Tool

2.

Cotton Cloth

3. Long Nozzle

4. Jet Nozzle

5. Jet Nozzle Base

6.

Handle Cover

7. Steam Button

8. Main Body

9. Water Reservoir Release Button

10.

Water Reservoir

11. Cord

12. Nylon Brush

13. Angled Nozzle

14.

W

indow Squeegee

15. Water Jug

4

1

8

9

10

6

7

11

12

13 14 15

2

3

5

V-084 User Guide.qxd 6/6/06 12:32 pm Page 3

3

S

afety Information/How to Attach the Accessories

2. Safety Information

FOR HOUSEHOLD USE ONLY

WARNING: Beware that the nozzle gets very hot
during operation.

DANGER OF SCALDING: Avoid contact with the
steam.

1. Do not leave the appliance unattended while it is
switched on. Unplug the appliance from the
mains supply socket before each cleaning /
maintenance and before you fill / empty the
water tank.

2. The appliance must be kept out of children’s
reach and can’t be used by children.

3. In order to ensure safety, the appliance should
only be assembled, connected and operated as
set out in the instructions. Please also pay
attention to the specifications on the model
plate. Use only the accessories, which are
recommended by manufacturer.

4. Examine the appliance before use in order to
detect signs of damage. Do not operate if the
appliance, its power cord or plug, show any
signs of damage. In order to comply with safety
regulations and to avoid hazards, qualified
personnel must carry out repairs of electrical
appliances. If repair is needed contact our
customer service department.

5. The appliance cannot be operated if the power
cord or plug is damaged. Do not use the power
cord to carry the appliance. Beware that the
power cord does not come into contact with hot
surfaces.

6. Check the appliance and the mains wire before
each use for perfect status.

7. After the use unplug the appliance from the
mains supply socket.

8. During the operation keep the openings and the
air outlet always free for good air ventilation.

9.

Make sure that the appliance is not tilted over
45° during the operation. When the appliance is
in operation, the nozzles should not be directed
toward humans, animals or plants.

10. Never immerse the appliance into water or other
liquid.

11. Only use water in this appliance. De-scaling
pr

oducts, perfume, detergent etc. should

not be
used with this appliance, in order to avoid
damage.

NOTE: If the supply cord is damaged it must be
replaced by the manufacturer, its service agent or
a similarly qualified person in order to avoid a
hazard.

NOTE: Before each cleaning/maintenance and
after each use unplug the appliance from the
mains supply socket and let it cool down
sufficiently.

NOTE: The liquid or steam must not to be
directed towards equipment containing electrical
components, such as the interior of ovens.

The filling aperture must not be opened during
use.

WARNING: The appliance heats up in the
operation therefore do not touch the hot surface;
use only the grasps or buttons. Always let the
appliance cool down, before accessories are
removed or attached from it.

ELECTRICAL WIRING: This appliance must be
attached to a mains supply socket with
grounding, therefore it is equipped with a mains
cable with ground wire.

WARNING: Only a qualified person is allowed to
check your mains supply socket. Never try to
modify or change the mains plug of the appliance.
Make sure that the supply voltage corresponds to
the voltage marked on the rating label of the
appliance.

3. How to attach the
accessories

Warning: For the sake of safety, the plug must
be unplugged from socket before attaching the
accessories.

Warning: This appliance should not be used
directly on soft plastics, non pre-treated wood or
cold glass. To ensure steam can be used on the
desired surface a small test run should be
conducted to pr

event damage.

V-084 User Guide.qxd 6/6/06 12:32 pm Page 4