Vax V-051, V-053, V-054, V-052 Easy Manual

easy guide

Please read carefully before using your
cleaner. Always fully extend mains
cable before use.

V-051/V-052

V-053/V-054

Cylinder range

Parts checklist

Parts Accessories Optional accessories

1) Carry handle 9) Dusting brush 13) TurboToolTM(V-052 only)

2) On/off button 10) Upholstery tool 14) Turbobrush (V-053 only)

3) Cord rewind button 11) Crevice tool

4) Hose connection socket 12) Combination floor head

5) Dust container

6) Top cover release buttons

7) Carry handle release button

8) Telescopic extension tubes

4

5

11

9

12

13

14

10

3

1

2

7

6

8

Assembling the cleaner

21

fig. 1 To attach the flexible hose to the vacuum cleaner, push the connecting end of the flexible hose into the hose

connection socket on the vacuum cleaner by pressing the two buttons on either side of the hose connection.

fig. 2 The telescopic extension tubes can be lengthened or shortened by pushing the button forward and sliding the

tubes apart or together as required.

Assembling the easy-reach tool system

Your Vax cylinder is equipped with easily-accessible tool storage. To assemble this, please follow these instructions.
fig. 3 The tool storage system fixing bracket is already in place on the extension tube.

Insert the holding tubes as shown until the tubes click into place.

fig. 4 Place the dusting brush (A), upholstery tool (B) and crevice tool (C) on the tubes as shown.

3

4

A

C

B