
3
2
5
13
4
6
7
10
8
9
1
11
12
14
1. Parts Overview
The Unit
1 On/Off Button
Insert the plug into the electrical outlet. Press the
on/off switch on the top of the vacuum cleaner, to
switch the vacuum cleaner on and press the button
again to turn the vacuum cleaner off.
2 Dirt Container
Locked into the unit.
3 Dirt bin separator
4 Dirt Container Carry Handle
Use the carry handle located on the front of the dirt
bin to carry the dirt container.
5 Dirt Container Release Button
Press the button on the top of the dirt container carry
handle to release the bin from the unit.
6 Hose inlet
7 Tool storage cover
Crevice tool & 2-in-1 tool storage.
8 Carry handle
Located on the top of the unit, used to move the
vacuum cleaner from room to room.
9 Auto-Cord rewind
To rewind the power cord, press the cord rewind
button, located on the top of the vacuum cleaner
10 Floor tool parking slot (hidden)
For convenience there is a parking slot located at the
rear of the vacuum cleaner where the Floor Tool can
be parked for carrying and storage.
11 Plug (hidden)
12 Exhaust filter cover (hidden)
Located at the rear of the unit.
13 Dirt bin quick release button
Hold the dirt container over a bin and press the
release button.
14 Pre-motor filter
Located on the side of the dirt bin.
Retain this guide for future reference.
Bagless cylinder
Vax model number: V-116 SERIES
instruction manual
Vax careline 0870 606 1248
www.vax.co.uk
What is your vax’s serial number?
Note this down in case you need it in future
(on the base of
your cleaner)
What is your vax’s model number?
V
-
Vax V-116AP User Guide.qxd:V-116AP User Guide 31/10/08 13:51 Page 1

www.vax.co.uk
The Accessories
15 2-in-1 Tool
a. Dusting Brush: For delicate surfaces.
b. Upholstery Tool: For carpet, upholstery and stairs etc.
16 Crevice Tool
For crevices, corners and cracks.
17 Telescopic Tube
The telescopic tube can be lengthened or shorted by
pushing the button in and sliding the tube apart or
together as required.
18 Combination floor tool
For carpet and rug cleaning: Press the rocker switch
on the Combination Floor Head to raise the brushes.
For hard floor cleaning: Press the rocker switch on the
Combination Floor Head to lower the brushes.
19 Hose
20 TurboTool
For pet hair, stair and upholstery cleaning.
21 22 23
Parts Overview
To replace or purchase parts for your vacuum
cleaner, please visit our website:
www.vax.co.uk
If your Vacuum Cleaner or Accessories are Damaged/Faulty
Please Call our Vax Careline on: 0870 6061248
Your Filters:
21 HEPA pre-motor filter
22 Fibre pre-motor filter
23 Anti-bacterial HEPA post-motor filter
IMPORTANT: The condition of the filters affects
the performance of your vacuum cleaner. Please
check and wash filters periodically (depending on
level of use). For full cleaning instructions see
page 4-5.
IMPORTANT: Do not use the vacuum cleaner
without all the filters in place.
2
parts overview
Replacement filter kits are available at www.vax.co.uk
1
5a
1
5b
16
17
18
20
1
9
KEEP YOUR VAX LIKE NEW!
Vax V-116AP User Guide.qxd:V-116AP User Guide 31/10/08 13:51 Page 2

V
ax Careline 0870 606 1248
3
assembly / attachments / operation / storage
WARNING: Always
switch off and unplug
the vacuum cleaner from
the electrical outlet before
assembling, opening or
emptying the dirt container,
or before connecting/
disconnecting the attachments.
2. Assembling your vacuum cleaner
3. Choose the attachments for the job:
4. Operating the appliance
5. Packing away and storage
IMPORTANT: Always unplug the vacuum from the electrical
outlet and rewind the power cord as directed before storing.
NOTE: When rewinding the power cord, guide the cord
with one hand, This will prevent the cord from whipping
which could cause damage or injury.
NOTE: For convenience there is a parking slot located at
the rear of the vacuum cleaner where the floor tool and
hose can be parked for carrying and storage.
19
19 17
CLICK!
1
7
17
18
NOTE: Fully unwind the
power cord. A yellow mark on
the power cord indicates the
recommended cord length.
Do not exceed the cord
length beyond the red mark.
16
2015
CLICK!
18
Vax V-116AP User Guide.qxd:V-116AP User Guide 31/10/08 13:51 Page 3

www.vax.co.uk
4
dirt container / filters
6. Dirt Container: Maintenance
Emptying the Dirt Container
Cleaning the dirt bin separator
7. The Filters: Maintenance
Cleaning the Pre- Motor Filter
HEPA Pre-motor filter
IMPORTANT : Always switch off and unplug the vacuum cleaner from the electrical outlet before removing the Dirt
Container.
IMPORTANT : Do NOT use the
vacuum without ALL of the
filters in place.
Vax recommends that the pre- and
post-motor filter should be checked and
cleaned periodically depending on the
frequency of use and the volume of dirt
being picked up on each occasion.
NOTE : Both Pre- and Post-Motor Filters
can be rinsed in warm water (max 40°C).
Allow to air dry for 24 hours before
replacing. Do NOTuse any detergents or
boiling water to wash the filters.
IMPORTANT: Your vax vacuum cleaner is fitted with high performance filters it is essential that these are well
maintained and cleaned according to the following instructions.
Vax V-116AP User Guide.qxd:V-116AP User Guide 31/10/08 13:51 Page 4