Vax Air3 U88-AM-B User Manual

Page 1
User Guide
Performance is everything.
vax.co.uk
U88-AM-B / U88-AM-P / U88-AM-R / U88-AM-T / U87-AM-C
Designed in the UK
Page 2
vax.co.uk
Page 3
Machine Overview
Handle Handle height adjuster Handle release button Dirt container release button Carry handle Power on/o button Brushbar on/o button Inner cyclones Dirt container Post-motor lter cover Brushbar blockage indicator Brushbar access clips Rotating brushbar Quick release cord wrap Cord Wheels Brushbar reset button Stretch hose Telescopic extension tube 2-in-1 crevice tool
and dusting brush Upholstery tool Pre-motor lter Post-motor lter TurboTool (Pet, Reach
and Total Home models) Flexi crevice tool
(Reach and Total Home)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24
25
NOTE: Some parts may vary according to model. Please check inside ap of box for more details.
2
9
5
8
4
3
1
10
17
6
7
12
11
16
15
14
19
13
18
2vax.co.uk
25
21
24
20
22
23
Page 4
vax.co.uk
Page 5
Getting Started
1. Insert the handle
2. Adjust handle up/down to the
desired height
Attach the 2-in-1 and upholstery tool to their on board storage area.
PLEASE READ SAFETY INFORMATION BEFORE USE (p3)
Assembling your upright
Attach the hose end to the oorhead ensuring it clicks into place. (All accessories can be used by either attaching them to the handle or the hose).
How to use
Twist the cord holder to release the cord.
Plug in your machine and turn it on.
For brushbar position, press the brushbar on/o button at the top of the unit. Brushbar on — carpets. Brushbar o — hard oors.
Recline the unit and twist the handle to manoeuvre under and around furniture.
1
2
Before plugging the cord into the electrical outlet, make sure the switch is in the ‘o’ position. Hold the vacuum cleaner rmly when starting and in use.
Don’t over ll the container to avoid clogging your lters.
MAX FILL
4vax.co.uk
Page 6
vax.co.uk
Page 7
6vax.co.uk
Looking After Your Machine – Filters
Cleaning the HEPA post-motor lter
TAP
1
2
Remove the post-motor lter from the body of the vacuum cleaner.
Cleaning the pre-motor lter
1
2
3
Turn the dirt container lid anti-clockwise to remove.
24hr
MAX
40˚C
!
MAX
40˚C
5
4
T
A
P
4
Emptying and cleaning the dirt container
1
2
3
Press dirt container release button to remove the dirt container.
4
TAP
4
Hold dirt container over a bin and press dirt release button to open, allowing dirt to fall out.
WARNING: Always switch o and unplug the vacuum cleaner from the electrical socket before assembling, opening or empting the dirt container, or before connecting/disconnecting the attachments.
IMPORTANT: Wash lters with warm water (40°C max) at least every 3 months for best cleaning results. Do not use your vacuum cleaner without all of the lters in place.
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will automatically turn the unit o.
Page 8
vax.co.uk
FAQs
Page 9
8vax.co.uk
FAQs
Warning: To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks.
Is there an accessory missing?
• Check the ‘Getting Started’ page in this guide or the box that the machine came in to make sure that the part is denitely included in your unit.
• If it is missing, we’re here to help. Simply call us on 0844 412 8455
Why won’t the vacuum cleaner pick up?
• The lters may need cleaning, please refer to the ‘Looking After Your Machine – Filters’ page of this user guide (p6)
• The separator may be clogged, please refer to the ‘Looking After Your Machine – Filters’ page of this user guide (p6)
• There may be a blockage in the hose, please check the hose and remove the blockage
• The dirt container may be full or blocked, please refer to the ‘Looking After Your Machine – Emptying and cleaning dirt container’ page of this
user guide (p6)
• The dirt c
ontainer may be incorrectly installed, please ensure the dirt container is locked in place
• The brushbar may not be turning, please refer to the ‘Looking After Your Machine – Removing Blockages’ page in this user guide (p7)
Why won’t the accessories pick up properly?
• The TurboTool may be blocked, please refer to the ‘Looking After Your Machine – Removing Blockages’ page in this user guide (p7)
• The accessory may be broken
What do I do if an accessory/the unit becomes damaged or broken?
• Please check if the damage is with the accessory or the unit. To do this, rstly remove the accessory from the unit and check if there is suction
from the hose. If there is suction from the hose this conrms that the damage is with the accessory. Please visit ‘spares shop website’ – vax.co.uk/support
• If having done the above checks, checked the hose for blockages and cleaned the lters there is still no suction/limited suction from the hose,
please call our Vax Careline 0844 412 8455
Why is dust escaping from the vacuum?
• The lters may not be installed correctly, please refer to the ‘Looking After Your Machine – Filters’ page of the user guide (p6)
• The dirt container may be full or blocked, please refer to the ‘Looking After Your Machine – Emptying and cleaning dirt container’ page of this
user guide (p6)
• The lters may need cleaning, please refer to the ‘Looking After Your Machine – Filters’ page of this user guide (p6)
• There may be a blockage in the hose, please check the hose and remove the blockage
Why does my vacuum cleaner have no power?
• It may not be plugged into the electrical socket correctly. Ensure that the plug is pushed into the electrical socket securely
• The electrical socket may not be working. Check the fuse or breaker and consult an electrician
• The motor thermostat may have tripped. Switch o and unplug the vacuum cleaner. Check the unit for blockages, clean the lters –please refer to the ‘Looking After Your Machine – Filters’ page of this user guide (p6) and clean the separator (please refer to the ‘Looking After Your Machine – Emptying and cleaning dirt container’ page of this user guide (p6). Leave the vacuum cleaner for 24 hours before switching the
vacuum cleaner back on
Why isn’t my brushbar rotating?
• The brushbar may not be turned on. Please refer to the ‘Getting Started’ page of this user guide (p4)
• The unit may not be reclined. Please refer to the ‘Getting Started’ page of this user guide (p4)
• The brushbar may be jammed. Please refer to the ‘Looking After Your Machine – Removing Blockages’ page of this user guide and
remove any blockages (p7)
• The brushbar may need re-setting. Please refer to the ‘Looking After Your Machine – Removing Blockages’ page of this user guide (p7)
Why is there a red light on my oorhead?
• The brushbar may be jammed. Please refer to the ‘Looking After Your Machine – Removing Blockages’ page of this user guide (p7)
• If the brushbar has been checked for blockages and the light still on, we’re here to help. Call us on 0844 412 8455
Why does the vacuum cleaner cut out?
• The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will automatically turn the unit o.
Should this occur, unplug the vacuum cleaner from the electrical socket and turn o the switch. Remove and empty the dirt container. Check the hose for blockages. Clean the lters. Allow the unit to cool for approximately 1 hour (if you have cleaned the lters you will need to wait 24 hours for the lters to dry before putting them back in the machine)
What do I do if the unit becomes damaged or broken?
• We’re here to help. Simply call 0844 412 8455 or visit vax.co.uk
Page 10
vax.co.uk
Page 11
Guarantee
FREE 6 year guarantee
Instead of taking me back to the shop, simply visit: vax.co.uk/support or call (UK) 0844 412 8455 (ROI) 1-800 928 308
Let us know what you think @VaxUK
we’re here if you need us
UK based customer care centre — Open 6 days a week
Monday-Friday 8:30am-18:30pm Saturday 9:00am-17:00pm
Please retain your original receipt for proof of purchase.
It’s quick and easy to register for your
online at: vax.co.uk/guarantees
Designed in the UK
Guarantee
10vax.co.uk
Page 12
V1.2
COMMERCIAL
Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK
email: info@vax.co.uk website: vax.co.uk
Performance is everything.
vax.co.uk
Loading...