Vava VA-IH006 User Manual

www.vava.com

ASIA PACIFIC

E-mail:[e-mail]
Tel:03-5542-0238（10-18時/土日祝日を除く）
JPImporter:株式会社SUNVALLEYJAPAN
Address:〒104-0032東京都中央区八丁堀３丁目18-6PMO京橋東９F

EUROPE

E-mail: [e-mail]
EU Importer: ZBT International Trading GmbH
Address: Halstenbeker Weg 98C, 25462 Rellingen, Deutschland

NORTH AMERICA

E-mail: [e-mail]
Tel: [phone] (Monday-Friday: 9:00 – 17:00 PST)
US Distributor: SUNVALLEYTEK INTERNATIONAL INC.
Address: 46724 Lakeview Blvd, Fremont, CA 94538

MANUFACTURER

Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129

Learn more about the EU Declaration of Conformity: www.vava.com

MODEL: VAIH006

BABY MONITOR

MADE IN CHINA

VA-IH006_V1.0 EN

User Guide

CONTENTS

SAFETY INSTRUCTIONS
CAUTION
PACKAGE CONTENTS
PRODUCT DIAGRAM
GETTING STARTED

1. Charging & Powering Baby Monitor

2. Powering Camera

3. Pairing the Baby Monitor & the Camera

4. Placing the Camera

5. Wall Mounting Camera

6. Wide-Angle Lens (Optional)

FUNCTIONS & OPERATIONS

Monitor Interface Overview

1. Monitor Settings

2. Add / View / Delete a Camera

3. Digital Zoom & Circulating

4. Pan-n-Tilt

5. Volume Adjustment

6. Night Vision

7. Alarm

8. Talkback

9. Wide-angle Viewing (Optional)

10. Temperature Alert

SPECIFICATIONS
TROUBLESHOOTING
FCC STATEMENT
IC STATEMENT

01
01
02
03
05
05
05
05
06
06
07
08
08
09
10
10
11
11
11
11
12
12
12
13
15
17
19

SAFETY INSTRUCTIONS

· Keep cord out of the reach of children (more than 3ft / 0.9m away) in case
of STRANGULATION.

ft

3

· NEVER place the camera or cord in or near the crib or playpen.

· NEVER mount the camera directly above the crib or playpen to avoid the
risk of injury.

· Only use the AC adapters provided.

· Never use the unit near water, including near a bathtub, sink, laundry
machine tube, wet basement, etc.

· Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices that produce heat.

· Only use attachments and accessories specified by the manufacturer.

· Unplug this device when unused for long periods of time.

· Do not insert anything into the upgrade pinholes. This operation is only
intended for professionals.

the initial installation, and on a regular basis after that.

· Check the reception regularly. Test the camera before use and after
changing the camera’s location.

· For indoor use only.

· Clean the camera with a dry cloth only.

· Do not block any ventilation openings.

· Microphone feedback might occur when the monitor is too close to the
camera. Please keep them at least 1.5m / 4.9ft apart.

PACKAGE CONTENTS

MENU

ZOOM

AUTO-PILOT

/ OK

TALK

CAUTION

Quick Start

Guide

User Guide

· NOT toys. Do not allow children to play with them.

· The lens and lens hood are small parts, keep them out of your baby’s reach
at all times.

· This product is NOT intended to replace the proper supervision of children.
You MUST check your child’s activity regularly.

· This product is not intended for use as a medical camera and its use should
not replace adult supervision.

· Unplug the product during lightning storms.

· Please check the operating range and condition of the camera carefully at

01 02

· Baby Monitor & Camera (Model: VA-IH006)

· Monitor Adapter with USB-C Charging Cable

· Camera Adapter

· Micro-USB Charging Cable

· Quick Start Guide

· User Guide

PRODUCT DIAGRAM

Camera

Baby Monitor

1

2

3

1

2

3

4

5

6

7

8

9

4

MENU

ZOOM

AUTO-PILOT

/ OK

TALK

14
15

16 17

Antenna
Volume Indicators
Microphone
Charging Indicator
Power Indicator
Menu Button
Zoom Button
Left Button
Up Button

10

11

12

13

14

15

16

17

18

5

7

8

9
10
11
12

13

Right Button
OK Button
Down Button
Talk Button
Power Button
Upgrade Pinholes
Back Stand
Speaker
USB-C Port

1

2

3

18

9 10

1

Camera Vents

2

Camera Antenna

3

Micro-USB Port

4

Temperature Sensor

5

Reset Pinhole

4

566

6

Power Switch

7

Speaker

8

Lens

9

Pairing Button

10

Mounting Hole

7

8

03 04

GETTING STARTED

1. Charging & Powering Baby Monitor

1) Connect the monitor adapter to the monitor and a power outlet.

2) Unplug the unit when its power indicator turns off, indicating a full charge.

3) Press the Power button on the monitor to power on with the power indicator
lighting green.

2. Powering Camera

1) Connect the camera to power source via the Micro-USB cable and
camera adapter.

2) Slide the Power Switch on camera to power on. Make sure the power
indicator light is green.

· Only use the power adapters included in the package.

· Do not place the camera and power cord within the reach of your
baby.

3. Pairing the Baby Monitor & the Camera

By default, one camera has been paired with the monitor when manufactured.
When you power on the monitor and camera, the two will automatically pair.
To add more cameras, press the Pair Button at the bottom of the camera,
press Menu button, select through -> -> , and then the monitor will
auto-pair with the camera.

4. Placing the Camera

Place the camera 1.5-2m / 4.9-6.6ft away from your baby for safety reason
and for a better view when in night vision mode.

1.5-2m / 4.9-6.6ft

5. Wall Mounting Camera

1) Select the spot to mount the camera, keeping it beyond your baby’s reach.

2) Insert the screw (not included) pre-installed on wall into the mounting hole
of the camera.

· Once they’re paired successfully, the camera number with icon

will be shown at the top left.

1

· Microphone feedback might occur when the monitor is too close
to the camera. Please keep them at least 1.5m / 4.9ft apart.

· It is recommended to pair in the baby's room, or wherever you
intend to place the camera.

05 06

It’s strongly recommended to use a screw and screw anchor. Don’t
release the camera until you’re sure it is firmly mounted.

6. Wide-Angle Lens (Optional)

The aluminum lens hood (no special video effects) has been installed when
the camera was manufactured.
To install wide-angle lens (sold separately), simply rotate the original lens
hood counterclockwise to remove. Then install the new lens and rotate
clockwise to fix in place.

FUNCTIONS & OPERATIONS

Monitor Interface Overview

1

2 25 PM 12:08

1 2 3 4

Top Status Indications

Signal

1

Current Camera

2

Zoom

Current Temperature

Night Vision

PM 12:08

Current Time

Alarm

Mute

Talk-back

Battery

07 08

4 levels

Camera 1 / Camera 2 / Camera 3/ Camera 4

2X / 4X

°C / °F

Auto ON in a dim environment

AM / PM

ON / OFF

Mute all system sounds

ON / OFF

5 levels

Bottom Menu Brief

Add Camera

View Camera

Delete Camera

Speaker Volume

Brightness

Camera

Alarm

Settings

Max. 4 cameras

Select to view each at a time

Select to delete cameras

0-6 levels (mute when it’s 0)

1-8 levels

To add / view / delete cameras

OFF / 2Hr / 4Hr /6Hr / Set Time
(hour / minute / AM, PM)

Time
System sound volume
Temperature scale
Auto-sleep time
Restore to factory setting
Customer service contacts

1. Monitor Settings

Press Menu Button, Left and Right Buttons, and then OK Button to set the
monitor:

1) Time setting: Set the current time by setting hour, minute, and AM/ PM.

2) System sound volume: Select between Low, High, and Mute.

3) Temperature scale: Select between °C and °F.

4) Screen auto-sleep time: Select between 1min, 2min, 5min, and OFF.

5) Restore to factory settings: Press OK Button to confirm resetting;

“Restoring factory settings” will be shown when restoring, and you can’t
press any button to control the device during this period. The monitor will
auto restart when it’s done.

6) Customer service contacts: Check the email, Tel. number, and address

for customer service.

· To mute the sound during poor monitor-camera connection, please
set the system sound volume to mute.

· When the monitor screen is under sleep mode, the power indicator
flashes green slowly while the audio is still on; press any button to
awake. You can also short press the Power Button to turn the screen
off.

· Press and hold the Power Button to power on / off the monitor.

2. Add / View / Delete a Camera

1) Press Menu button, select through -> -> to add a camera.

2) Select through -> to view a camera.

3) Select through -> to delete a camera.

You can switch viewing different cameras; the current camera
number will be shown with the Camera icon on the monitor.
You can only select one camera to view at one time.

3. Digital Zoom & Circulating

Press Zoom Button to zoom in to 2X / 4X when viewing the camera. A third
pressing of the button will restore to the original image.
Press and hold OK Button 4 seconds to start auto circulating, press OK
again to stop.

The current zoom level number will be shown with the Zoom icon
on the monitor

2

09 10

4. Pan-n-Tilt

When viewing the camera, press Left / Right / Up / Down Button to view at
different angles, 108 degrees vertically and 270 degrees horizontally.

5. Volume Adjustment

Press Menu Button -> OK Button -> Left / Right Button to volume down / up,
and OK Button to saving your settings.

For system sound adjustment, please go to Monitor Settings ->
System sound volume .

6. Night Vision

The night vision is automatically activated in a dim environment. The camera
has 12 high-intensity infrared LEDs for picking up clear images in the dark.
Black and white images can be captured within 2m distance.

7. Alarm

Press Menu Button -> Right Button to locate Alarm menu -> OK Button ->
Up / Down Button to select the timer setting. You can set a 2Hr, 4Hr or 6Hr
alarm, or set the hour and minute otherwise. When the alarm time is reached,
a beep will be heard. Press OK Button to stop; otherwise it’ll keep beeping for
30s, beeping again in 1min, stops after it’s alerted 3 times.

8. Talkback

Press and hold Talk Button to talk to your baby, release it to exit the talking
mode.

When you enter the talking mode, the icon will be shown on
the monitor.
When it’s mute or the speaker volume is too low, you may not be
able to hear the baby.
When you’re pressing the Talk Button, the camera will not
transfer the sound to the monitor. Please release the button to
listen to your baby.

9. Wide-angle Viewing (Optional)

Install your wide-angle lens (separately sold) referring to the previous
mounting wide-angle lens section. Now you can view the camera in a wider
angle of about 170 degrees.

10. Temperature Alert

The monitor will prompt too high (>35°C / 95°F) and too low (<0°C / 32°F)
temperatures with the “HH” and “LL” icon, accompanied with a & icon
and a beep alert.

When the monitor is mute, you may not be able to hear the baby.

· When the timer is set, the Alarm icon will be shown on the monitor.

· Before setting, please check that the monitor time is your current
time.

11 12

SPECIFICATIONS

Monitor

Model

Sonix IC

Resolution

Connectivity

Image Aspect

Image Compression

Operating Range

Temperature Alert

Volume Control

Brightness

Antenna

Power Input

Zoom

Two-Way Talk

Multi-Camera

Storage Temperature

Operation Temperature

VA-IH006

SN93700

IPS (720 x 1280), PPI=293

2.4GHz

16:9 (HD720)

h.264 (frame rate = 18fs)

280 - 300m (antenna vertically positioned at 90°)

Yes

8 levels

8 levels

Rotatable (max. 90 degree)

5V / 1.5A (1.5m long USB C cable)

Zoom In (2X)

Zoom In (4X)

Auto-Pilot (1 Cycle)

Yes

Max. 4 cameras

-10°C ~ 55°C / 14 - 131°F

0°C ~ 40°C / 32 - 104 °F

Camera

Cmos

Connectivity

Image Compression

Power Input

Pan-n-Tilt

Zoom

View Angle

Lens Focal Length

Night Vision

IR LED

Light Sensor

Two-Way Talk

Storage Temperature

Operation Temperature

720p (1280x720), 3.0M, 1/4"

2.4GHz

h.264 (frame rate = 18fs)

5V / 1.2A, 2.5m-long Micro-USB cable

108 degrees vertical (Up=90, Down=18)

270 degrees horizontal (Left=135, Right=135)

Zoom In (2X)

Zoom In (4X)

Auto-Pilot (1 Cycle)

Vertical: 1.5m, Horizontal: 1.4m

1.5m to infinity

Black & White image, up to 2m clear range

Non-visible IR LED with wavelength 940nm (x 12 pcs)

Yes

Yes

-10°C ~ 55°C / 14 - 131°F

0°C ~ 40°C / 32 - 104 °F

13 14

TROUBLESHOOTING

Product not
powering on?

Baby monitor
can’t connect
with the camera?

Nothing shown
when I view a
camera?

· Check that the camera and monitor are turned on.

· Check the camera is connected to power properly (it
cannot be charged; it’s power off once disconnected
from power).

· Check that the monitor is of enough battery (it’ll auto
shut off when battery level icon flashes red slowly on
the monitor).

· Check whether the camera is near the monitor
(recommended to keep within 1.5-2m / 4.9-6.6ft).

· Check whether the monitor is of low battery. Charge it
in time to restore good connection.

· Check whether the camera is well connected to power.

· Check whether there are any large metallic objects
including doors, refrigerators, mirrors, etc., are placed
between the camera and monitor thus blocking the
radio signals.

· Check whether there’s any other 2.4GHz product is
used nearby like WiFi routers, microwave ovens, which
may interfere the connection.

· If nothing above is involved, please retry to pair:

Press and hold the OK button on monitor to enter

pairing mode, and the monitor will connect with the
camera nearby automatically.

· Check all connections to the camera (power cable
plugging and pairing).

· Check whether the screen is in sleep mode. Press any
button to awake it.

· Check whether the camera is within range of the
monitor.

· Adjust the monitor antenna to vertical position for
better signal transfer.

No sound from
the monitor?

Black and white
pictures?

Choppy videos?

Too much noise?

Check whether the system sound volume is set High
or Low. It’ll be mute if set so.

Night vision LED may be ON. Please turn on room
lights to force it out of the night mode.

· Check whether the camera is near the monitor and
that there’re no obstacles between them.

· Adjust the monitor antenna to vertical position for
better signal transfer.

· Volume may be set too high. Press Menu Button ->
OK Button -> Left Button to volume down.

· The camera and monitor may be put too close; keep
them at least 1.5m / 4.9ft apart.

· The camera may be too out of range. Please keep it
within 10m / 32.8ft to the monitor.

15 16

FCC STATEMENT

changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

FCC 20cm Statement

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator & your body. This
transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.

17 18

IC STATEMENT

This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-ex­empt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d'Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :

1) L'appareil ne doit pas produire de brouillage;

2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.

The device meets the exemption from the routine evaluation limits in section

2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la
section 2.5 de RSS 102 etla conformité à l'exposition de RSS-102 rf, utilisa­teurs peut obtenir l'information canadienne surl'exposition et la conformité
de rf.

This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator
and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ouémetteur. Cet équipement devrait être installé et
actionné avec une distance minimum de 20 centimètres entre le radiateur et
votre corps.

19

尺寸：120*160mm
装订成册
材质：封面128克铜版纸 内页80克书纸