Varimixer W60(A) Specifications

W60A Food Mixer

Models

W60A

Project

Item

Quantity

CSI Section 11400

Approval

Date

W60A Food Mixer

Specifications

Mixing system
The VARIMIXER W60A is a planetary mixer with
a variable speed drive system. The mixer frame
consists of a column with welded-on feet, and
a top traverse closed by a stainless steel cover.
The bowl is mounted in bowl arms which are
manually raised and locked simultaneously - or
lowered and opened, respectively. The column
contains the motor and the bowl arm mecha­nism. The top traverse contains the transmis­sion system consisting of the moveable pulleys,
the intermediate belt drive and the planetary
head. Start and stop push buttons are mounted
on the frontplate along with a 15-minute
electrical timer with a HOLD feature. Mixing
tools are mounted in a bayonet shaft in the
planetary head.
Construction
Mixer frame of heavy-gauge, welded, rolled
steel plate. Durable powder coated finish
used on those surfaces not constructed of
stainless steel. Top cover, splash apron and
planetary head cap in heavy-gauge stainless
steel. Molded PVC feet pads. Bowls in stainless
steel. Mixing tools in cast aluminum or stainless
steel. Bayonet shaft in stainless steel. Variable

Standard Features

• Powerful 3 hp motor

• Variable speeds from 60 to 300 RPM

• By manually operating a single lever, the
bowl raises and locks in position.

• Overload protection and no voltage
release

• No bowl adaptors required for the down­size bowls

•#12 attachment hub with 198 rpm speed

• Locking pin on tools instead of shaft.

• Neoprene feet to minimize walking and
rusting

• Permanently lubricated planetary head
and attachment hub case

• 15-minute timer with HOLD feature

• Stainless steel 60-qt. bowl, wire whip and
dough hook

• Alloy flat beater

speed V-belt transmission based on precision
machined cast iron pulleys. Springloaded
moveable pulleys in the variable speed drive
for automatically adjusting of the tension of
the special V-belt. Planetary mixer head of
unique design. The planetary head revolves in
heavy-duty ball and needle bearings around
the main shaft. Precision milled beveled gear
on the main shaft engages the bayonet shaft
and the fixed internal gear ring through a
double set of milled gears obtaining extra high
torque capabilities of the mixing tools.
Precision milled cast iron bowl arms lower and
raise the bowl and clamp it in a precise position
relative to the mixing tool allowing for small
tolerances between tool extremities and the
bowl.
Attachment drive directly coupled to the motor
securing maximum power output to the meat
grinder or vegetable cutter. The 198 rpm high
speed and the powerful motor give the meat
grinder an unusually high capacity in relation
to the size of the mixer.

Options & Accessories

30-qt. bowl and accessories
Bowl scraper in 60-qt. and 30-

qt. sizes
Stainless steel wing whip
Pastry knife
Bowl Truck with handle
Vegetable slicer and shredder

plates
Meat grinder
Power Bowl Lift
Mark IV programmable

controls
Ergo (tall column)
Bowl Screen Ingredient Chute
Stainless Steel Splash Ring
Vinyl MIxer Cover

5489 Campus Drive

Shreveport, LA 71129 USA

Tel: [phone]

Tel: [phone]

Fax: [phone]

E-mail: [e-mail]

www.varimixer.com

Bulletin No. W60A 03/10

W60A Food Mixer

DIMENSIONS

MODEL

NO.

W60A Large Bowl.

CAPACITY OVERALL SIZE cm NE T

HEIGHT WIDTH LENGTH WEIGHT CLASS CU. FT. DIMENSIONS

60-Qt.

Small Bowl

30-Qt.

55 5/8”

(141.288cm)

25 1/2”

(64.77 cm)

40-1/2”

(102.87 cm)

WEIGHT

582 lbs.

(263.99 kg)

ELECTRICAL DATA FOR MOTOR**

*230VAC Supply/60 HZ/1 Phase

Wires (including. Ground) ............ ...........................3

Motor Power ....................................HP .......................3

Amperes, full load ..........................A ...................... 10

No power cord included

*208-240VAC Supply/60 HZ/3 Phase

Wires (including. Ground) ........................................4

Motor Power ....................................HP .......................3

Amperes, full load ..........................A .........................8

No power cord included

MIXING SPEED

Agitator Speed ................................Min. ................. 60

Agitator Speed ................................Max ...............300

Attachment Hub ............................RPM ...............198

%AR= weight of water
weight of our
Batch size and/or speed reduction is required if any of the following conditions
exist.

1. High Gluten Flour

2. AR % under 40%

3. Water Temperature under 65 Degrees F

SHIPPING INFORMATION

707 lbs.

(320.69 kg)

85 64 H

(177.80 cm)

70”

W

32”

(81.28 cm)

CAPACITY CHART

Mashed Potatoes Whip or Beater 46 lbs.
Whipped Cream Whip 12 Qts.
Muns Beater 60 lbs.
Layer Cake Beater 69 lbs.
Pie Dough Pastry Knife 58 lbs.
Pancake Batter Whip or Beater 28 Qts.
Cookie Dough Beater or Hook 58 lbs.
Donuts, Yeast Hook 70 lbs.
Donuts, Cake Beater 60 lbs.
Bread Dough (65% AR) Hook 75 lbs.
Pizza Dough (50% AR) Hook 75 lbs.

L

49”

(124.4cm)

Model #_______________

CSI Section 11400

*On the nominal motor voltage, + or - 10% tolerance is allowed.
**Also available in 480/60/3, 380/50/3, 220/50/3, 220/50/1, - not submitted for UL
listing.

5489 Campus Drive

Shreveport, LA 71129 USA

Tel: [phone]

Tel: [phone]

Fax: [phone]

E-mail: [e-mail]

www.varimixer.com

Bulletin No. W60A 03/10

Litho in U.S.A. ©Varimixer.

Standard tools: Whip, hook and beater.