Vapamore MR-75 User Manual

Mode d’emploi et manuel de l’utilisateur

SAFETY INFORMATION

GO TO VAPAMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO

FAILURE TO FOLLOW SAFETY INFORMATION AND WARNINGS MAY

!

CAUSE PERMANENT DAMAGE AND VOID PRODUCT WARRANTY.

.

use only with a grounded outlet.

Only use distiled water. Using hard water can cause
calcium or mineral build up and void the warranty.

Vapamore in order to prevent a fire hazard.

Do not pull or drag steam cleaner using the
steam gun and hose.

Steam cleaner must be level and on the floor during use.

listed on the label.

Drain water tank prior to shipping, transporting.

supply cord.

Never use additives such as perfumes, stain removers, or
other chemicals in the water tank as they will void the
warranty, cause permanent damage, and be dangerous.

Make sure the water tank cap is fully secured

Do not leave the steam cleaner on and unattended. Always
switch the steam cleaner off and remove plug from wall
outlet when unattended.

storage.

before use.

(See cleaning and storage).

37.*To provide continued protection against risk of electrical
shock, connect to properly grounded outlets only.

38. *Not for space heating purposes.

GO TO VAPAMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO

PARTS OVERVIEW

5

6 7

PARTS LIST

MR-75 Amico
Steam hose and connector
Accessory tool adapter
Measuring cup / funnel
Carrying case
Detail scraper
Nylon brush straight
Jet nozzle attachment
Nylon brush grout
Nylon brush medium
Nylon brush large
Metal brush small brass
Metal brush large brass
Metal brush large stainless steel
Clothes / fabric - Smooth surface squeegee
Cotton cover x 3

8 9 10 11 12 13 14 15

16

TECHNICAL SPECIFICATIONS

Model: MR-75 Amico
Power supply: 120 V - 60 Hz
Heating element: 1000 W - 8.33 A
Steam Pressure: 3 bar- 43.5 psi
Tank capacity: 200 ml - .21 qt
Heating time: 4 min.
Steam temp at tip: 99˚ C - 210˚ F
Power cord length: 10 ft
Gross weight: 1.58 kg - 3.5 lb

GO TO VAPAMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO

FILLING & OPERATION

GENERAL FUNCTION: The MR-75 Amico steamer uses a heated boiler tank lled with water
to create steam. When rst plugged in you will see the red power light showing that the
unit is powered on and heating. Once at full temperature the light will turn green showing
the steamer is ready for use. This light will change back and forth from red to green during
use as the heater cycles on and o. The steamer can be used anytime after the initial
heating and when the light is cycling between colors. The steam pressure will uctuate
as the steamer is being used and the boiler cycles on and o during use.

!

or

!

Only ll with distilled water. Using “hard” mineral heavy water will clog

internal components and can cause failure to internal parts and void the warranty.

!

!

.

Using additives of any kind will void the warranty.

!

Fig.1

Fig.2

Fig.3

Vapamore

1

77

Push down
and turn.

300ml / .32qt

!

NOTE:

Red light when
plugged in.

Green light when
ready for use.

Always make sure the steamer is not plugged in and
is cool before lling with water.

If steamer is hot, allow

steamer to cool down completely before removing water
tank cap.

5

Unscrew the tank cap by pressing the cap down and
simultaneously turning counter clockwise. Fig. 1

Use the supplied measuring cup lled with distilled water
to the 200ml MAX line. Fig. 2

Replace the water tank cap by pressing down on the cap
and simultaneously turning it clockwise. Make sure the
cap is fully tight to prevent any steam from leaking out.

and once cooled down tighten cap further.

Plug in the steamer to a grounded 110 outlet. The steamer
is ready for use. (Initial start up from cold machine is aprox.
4 min) *The status light will cycle red to green during use
as the boiler maintains the temperature. Fig. 3

STEAM CLEANER ASSEMBLY

7

2

1

Accessory adapter
twist to lock.

GO TO VAPAMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO

Fig. 4

!

The MR-75 Amico has a full line of accessories
that include the accessory tool adapter, jet nozzle
attachment, clothes / fabric - smooth surface

squeegee, detail scraper, steam hose and
connector, carrying case and a full line of brushes.

The carrying case can be used to store and transport
the MR-75 Amico and all the accessories and tools.
Fig. 4

The accessory tool adaptor is required when using
all accessories. Attach by aligning the arrow on the
accessory with the arrow on the accessory tool
adapter and twisting to lock in place. Fig. 5

Fig. 5

Accessories twist lock

2

onto the adapter.

Fig. 6

Carrying case
for MR-75 and
all accessories.

2

1

Accessory adapter
twist to lock.

1

Fig. 7

3

Fig. 8

Fig. 9

Push to
release
steam.

The MR-75 Amico can be used with or without the
steam hose.

For use without the steam hose, connect the
accessory tool adapter directly to the MR-75
Amico by twisting to lock in place. All accessories
can then be used with the accessory adapter. Fig. 6

For use with the steam hose, connect the steam
hose directly to the MR-75 Amico by twisting to lock in
place. There is a locking tab that will click to lock. To
remove the steam hose, slide the locking tab and twist
to remove. Fig. 7

Connect the accessory tool adapter to the steam hose
by twisting to lock in place. All accessories can then be
used with the accessory adapter. Fig. 8

Once the MR-75 Amico is ready for use, depress the
steam trigger located on the top of the machine to
release steam. Fig. 9

!

GO TO VAPAMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO

Tool adaptor

90 Deg. jet nozzle

OPERATION

Fig. 10

Fig. 11

Fig. 12

Fig. 13

ACCESSORIES / DETAIL ADAPTOR

The accessory tool adaptor can also be used on its own
as a straight jet nozzle tool or along with the 90 degree
jet nozzle attachment. These tools are great for removing
soap scum in the bath, shower and around faucets. Also
for cleaning tight areas such as toilet hinges where high
pressure steam can reach and blow out dirt and debris.

surface being treated. The steam temperature will
condense and cool within 1’’ of the jet tip. Fig. 10

ACCESSORIES / BRUSHES

Suggested uses (Metal brush), oven grills, BBQ grates,
cement stains, machinery, and metal surfaces. (Nylon
medium duty and large nylon brush), used for more
sensitive materials such as blinds, carpet, furniture, air

brush is used for harder less sensitive areas such as

Fig. 11 - 12

IMPORTANT : With all brushes it is important to not
apply excessive pressure or force. This can cause failure
of the detail adaptor or related parts. When using the
brushes let the steam do the work and the brush to
help agitate the stain or area being cleaned.

Fig. 14

Sanitize ­counter tops,
tile, stone,
granite, glass,
stainless steel,
walls, etc.

ACCESSORIES / SCRAPER

The scraper tool is great for removing stuck on food
or spills on hard smooth surfaces.

This tool is also good for removing wall paper,

paint and shelve paper along with removing gum from

. Fig. 13

ACCESSORIES / SMOOTH SURFACE TOOL

Using the clothes - fabric / smooth surface tool without
the cotton cover acts as a squeegee and is great for
sanitizing kitchen and bathroom counter tops chemical
free along with smooth surfaces such as stone, granite,
wood, glass, tile and stainless steel. Fig. 14