Vantec CB-ISATAU2 User Manual

391.29 Kb

SATA / IDE TO USB 2.0 Adapter

SUPPORT 2.5”, 3.5” & 5.25” IDE/SATA DRIVE


Transfer Rates Up to 12Mbps With USB 1.1

Transfer Rates Up to 480Mbps With USB 2.0

Easily add storage to any system with USB

Currently supports up to 500GB

Supports ATA/ATAPI-7

Supports LBA-48 Addressing

Hot-swappable: Plug and play without rebooting!


The SATA/IDE-USB Adapter gives you the flexibility of connecting almost any type of drive to your computer via USB. SATA, 3.5” IDE, 5.25” IDE, and 2.5” IDE drives are all supported and can be easily hot-swapped to your system. The included external power adapter will allow you to power your drives outside your system giving you the ability to quickly add or swap between drives without opening your case. The SATA/IDE-USB adapter incorporate 3 interfaces to one USB adapters.



SATA to USB 2.0


3.5” & 5.25” IDE to USB 2.0


2.5” IDE to USB 2.0


70 x 43 x 10 mm

Cable Length:

92cm (36in)


Intel Pentium II 350MHz-compatible or Apple G3 processor and greater

MicrosoftWindows 98SE/ME/2000/XP or Mac OS 8.6 and greater

USB-equipped system

For USB 2.0 speeds, the system must support USB 2.0 specifications

CD Rom drive (if drivers are needed)