How it Works
Valor
Loading...
TPMS GAUGE
User Manual
42 pgs1.22 Mb0

Valor TPMS GAUGE User Manual

Download
Page 1
TPMS Gauge - User Manual
1-800-568-9188
4320 Harvester Rd., Floor 2 Burlington, ON, L7L 5S4, Canada
Page 2
USER MANUAL – TPMS GAUGE
2
Proprietary Information
This specication is proprietary property of VALOR. It shall not be duplicated, used, or disclosed in whole or in part for any purpose other than ofcial VALOR business activities, including evaluation by prospective customers as identied by designated VALOR employees.
Page 3
USER MANUAL – TPMS GAUGE
3
Table of Contents
User Manual Overview
Description of Device ........................................... 4
Device Specications .......................................... 5
Physical Device Characteristics ........................... 7
Device Dimensions .............................................. 8
Device Rear Electrical Connections ..................... 9
Default Settings ................................................. 10
Device Software Versions .................................. 11
Main Screens .................................................... 13
Setup and Info Screens ..................................... 15
Additional Main Screen Displays ....................... 19
Pop-up Warnings ............................................... 21
Screen Descriptions
Power-up Screen ............................................... 23
TPMS Initializing Screen.................................... 24
Main Screen ...................................................... 25
Active Warnings Intro Screen ............................ 27
Active Warnings Screen.....................................28
Baseline Conrmation Intro Screen ................... 29
Baseline Conrmation Screen ........................... 30
Select Units Screen ........................................... 31
Contrast Adjust Screen ...................................... 32
Back-light Control Screen .................................. 33
Brightness Adjust Screen ...................................35
Software Version Information Screen ................. 36
Pop-Up Warnings
Under Pressure Pop-up Warning ....................... 37
Over Pressure Pop-up Warning ......................... 38
Over Temperature Pop-up Warning ....................39
Leak Pop-up Warning ........................................ 40
Tire Communication Pop-up Warning ................41
Signal Loss Pop-up Warning ............................. 42
Page 4
USER MANUAL – TPMS GAUGE
4
User Manual Overview
Description of Device
1. There are 3 buttons for navigating the screens
through an intuitive menu system.
2. Back-lighting can be controlled through the panel
lamp dimmer input through the menu screen. A dead-fronted warning indicator is positioned above
the graphic display window and is capable of
illuminating as an amber or red warning.
3. This user guide is intended to help you understand
functionality of the C-COM 2G module.
NAVIGATION BUTTONS
Page 5
USER MANUAL – TPMS GAUGE
5
Device Specications
Physical Characteristics
Housing and Bezel Material: Chrome or Black polycarbonate ABS plastic
Connector: Single Deutsch DT06, polarized and locking
Environmental Characteristics
Temperature, Humidity, Shock, Vibration, and Salt Spray: Meets or exceeds SAE #J1455-1994-08
Operating Temperature: -30 to +85oC
Storage Temperature: -55 to +105oC
Electrical Characteristics
Operating Limits: 9 to 32 VDC, reverse polarity protected
Transient Protection: Meets or exceeds SAE #J1455-1994-08
User Manual Overview
Page 6
USER MANUAL – TPMS GAUGE
6
Device Specications
Electrical Inputs
Battery/Ignition: 9 to 32 volts Input Current: 500 mA Backlighting: Variable through pin-3 input with 12v or 24v PWM dimmer or menu
setup screen.
Data Bus: SAE J1939 (CAN) 250K
Electrical Outputs
Switch To Ground: One, 500 mA
Display Characteristics
Type: Positive mode, transective, LCD dot matrix, FSTN Aperture Size (inches): 1.21W × 0.64H Pixel Dimensions: 106 pixels wide, 56 pixels high Viewing Angle: 12:00 Backlight Color: Standard is Amber (can be customized to any color)
User Manual Overview
Page 7
USER MANUAL – TPMS GAUGE
7
Physical Device Characteristics
User Manual Overview
Back of Device: Front of Device:
Page 8
USER MANUAL – TPMS GAUGE
8
Device Dimensions
User Manual Overview
.277 (7.04)
2.389
(60.68)
1.355
(34.42)
2.260
(57.40)
1.13 (28.70)
.16
(4.06)
2.07
(52.58)
Dimensions measured in inches (mm)
Gauge Dimensions: Panel Cut-Out Dimensions:
Page 9
USER MANUAL – TPMS GAUGE
9
Device Rear Electrical Connections
User Manual Overview
PIN SIGNAL
1 Battery/Ignition
2 Ground
3 Backlight (optional Analog input)
4 J1939+
5 J1939-
6 Output, switch to ground
Page 10
USER MANUAL – TPMS GAUGE
10
Default Settings
The following settings will be the default for initial programming.
‣ Default contrast set to 50%. ‣ Default backlighting control set by pin 3. ‣ When manually backlighting control selected, default set to 50%. ‣ Units set to English. ‣ C-COM 2G source address is 40 (0x28). ‣ Address claim NAME information:
• Arbitrary Address Capable=0
• Industry Group=0 (Global)
• Vehicle System Instance=0
• Vehicle System=0 (Non-specific)
• Function=60 (Cab Display)
• Function Instance=0
• ECU Instance=0
• Manufacturer Code=4 (Ametek-Dixson)
• Identity Number=0
User Manual Overview
Page 11
USER MANUAL – TPMS GAUGE
11
Device Software Versions
The following show the variations between the different software versions of each device.
Due to the fact that each device operate at different data rates, they cannot be interchanged.
1700 Device Software
Baud Rate 250 KB Same alerts display as all other versions of the Valor Display rmware. Same information displayed as all other version of the Valor rmware. Works with 4.0 KPA per bite versions of Valor TPMS rmware.
Does not have the Baseline conrmation screen.
1701 Device Software
Baud Rate 250 KB Same alerts display as all other versions of the Valor Display rmware. Same information displayed as all other version of the Valor rmware. Works with 5.5 KPA per bite versions of Valor TPMS rmware.
Includes Baseline conrmation screen.
User Manual Overview
Device Software Versions continued on the next page.
Page 12
USER MANUAL – TPMS GAUGE
12
Device Software Versions
The following show the variations between the different software versions of each device.
Due to the fact that each device operate at different data rates, they cannot be interchanged.
1702 Software Device
Baud Rate 500 KB Same alerts display as all other versions of the Valor Display rmware. Same information displayed as all other version of the Valor rmware. Works with 5.5 KPA per bite versions of Valor TPMS rmware.
Includes Baseline conrmation screen.
User Manual Overview
Page 13
USER MANUAL – TPMS GAUGE
13
Main Screens
LEFT HOLD will start 2.5 second automatic
rotation decrementing through Tire position, then Axle position. When on the lowest Axel­Tire position, it will then repeat from highest Axle-Tire position. ANY button press will
stop rotation.
RIGHT HOLD will start 2.5 second
automatic rotation incrementing Tire position, then Axle position. When on the highest Axle-Tire position, it will then repeat from lowest Axle-Tire position. ANY button press will stop rotation.
Diagram continued on the next page.
POWER
AMBER LED ON
1.5 SECONDS
RED LED ON
1.5 SECONDS
Same tire location received twice OR 20
seconds
User Manual Overview
TPMS
Initializing
Main Screens
Page 14
USER MANUAL – TPMS GAUGE
14
1
123 ºF 123 PSI
Axle 1 Tire 1
Axle 2 Tire 1
Axle N Tire 1
Axle 1 Tire 2
Axle 2 Tire 2
Axle N Tire 2
Axle 1 Tire 3
Axle 2 Tire 3
Axle N Tire 3
Axle 1 Tire 4
Axle 2 Tire 4
Axle N Tire 4
2
123 ºF 123 PSI
N
123 ºF 123 PSI
1
123 ºF 123 PSI
2
123 ºF 123 PSI
N
123 ºF 123 PSI
1
123 ºF 123 PSI
2
123 ºF 123 PSI
N
123 ºF 123 PSI
1
123 ºF 123 PSI
2
123 ºF 123 PSI
N
123 ºF 123 PSI
RIGHT PRESS
RIGHT PRESS
RIGHT PRESS
RIGHT PRESS
RIGHT PRESS
RIGHT PRESS
RIGHT PRESS
RIGHT PRESS
RIGHT PRESS
RIGHT PRESS
(Returns to Axle 1 Tire 1)
RIGHT PRESS
(Returns to Axle 2 Tire 1)
RIGHT PRESS
(Returns to Axle N Tire 1)
LEFT PRESS
(Returns to Axle 1 Tire1)
LEFT PRESS
(Returns to Axle 1 Tire 2)
HOLD CENTER BUTTON
(Takes You To Setup And Info Screens)
LEFT PRESS
(Returns to Axle 1 Tire 3)
LEFT PRESS
(Returns to Axle 1 Tire 4)
LEFT PRESS
LEFT PRESS
LEFT PRESS
LEFT PRESS
LEFT PRESS
LEFT PRESS
LEFT PRESS
LEFT PRESS
Main Screens
Page 15
USER MANUAL – TPMS GAUGE
15
Setup And Info Screens
User Manual Overview
PRESS CENTER BUTTON
(Diagram continued on the
next page.)
0 ACTIVE
WARNINGS
1+ ACTIVE
WARNINGS
DISPLAY NEXT
ACTIVE WARNING
RIGHT BUTTON
PRESS CENTER BUTTON To return to Active Warnings Intro Screen
Active Warnings Intro
Active
Warnings
PRESS LEFT BUTTON
No Warnings
Warnings
1
OVER PRESSURE
Page 16
USER MANUAL – TPMS GAUGE
16
Setup And Info Screens
User Manual Overview
PRESS CENTER BUTTON
(Diagram continued on the
next page.)
DISPLAY NEXT
AXLE
RIGHT BUTTON
PRESS CENTER BUTTON
To return to Baseline
Intro Screen
Baseline Intro
Baseline
Conrmation
PRESS LEFT BUTTON
PRESS RIGHT BUTTON
DISPLAY NEXT
TIRE
Baseline
1
Baseline
123 PSI
Page 17
USER MANUAL – TPMS GAUGE
17
PRESS CENTER BUTTON
PRESS CENTER OR
RIGHT BUTTON
CENTER – Keep previous selected unit
RIGHT – Save selected units
LEFT – Rotate selections
CENTER – Save selected setting. Exit
RIGHT – Increase contrast
LEFT – Decrease contrast
Select Units
Adjust Contrast
Contrast
Units
Metric
English
Units
English
Metric
Setup And Info Screens
User Manual Overview
(Diagram continued on next page.)
Page 18
USER MANUAL – TPMS GAUGE
18
PRESS CENTER BUTTON
PRESS CENTER BUTTON
RIGHT BUTTON PRESS
CENTER – Save selected
setting. Exit
RIGHT – Increase intensity
LEFT – Decrease intensity
CENTER – Keep previous setting. Exit
RIGHT – Save selected setting. Exit
LEFT – Rotate selections
PRESS ANY BUTTON TO RETURN TO MAIN SCREEN
Select Brightness
Software Version
Adjust Intensity
SW: 1.1 SW P/N: 1702A
Intensity
Back-light Control
Set By Pin 3
Set Manually
Back-light Control
Set Manually
Set By Pin 3
Setup And Info Screens
User Manual Overview
Software version may vary from the one shown in the diagram.
Page 19
USER MANUAL – TPMS GAUGE
19
Additional Main Screen Displays
User Manual Overview
123 ºF 123 PSI
1
Axle 1 Tire 1 has temperature warning.
1
123 ºF
123 PSI
!
Axle 1 Tire 1 has a pressure or leak warning.
1
123 ºF
123 PSI
!
Temperature Warning
Pressure or Leak Warning
6 Tires Per Axle
Page 20
USER MANUAL – TPMS GAUGE
20
123 ºF 123 PSI
1
Metric Units Selected
123 ºC 1234 kPa
1
TIRE COMM
!
2 Tires Per Axle
PGN 65268 never received or lost reception for 100 seconds
Tire Communication Issue
Additional Main Screen Displays
User Manual Overview
Page 21
USER MANUAL – TPMS GAUGE
21
Pop-up Warnings
User Manual Overview
PGN 65268 never received or lost reception for 100 seconds
TIRE COMM
!
SPN 2587=011 or 100 Amber LED ON for 011 Red LED ON
for 100
SPN 2587=001 Amber LED ON.
1
UNDER PRESSURE
!
1
OVER PRESSURE
!
Over Pressure Warning
Under Pressure Warning
Tire Communication Issue
Page 22
USER MANUAL – TPMS GAUGE
22
Pop-up Warnings
User Manual Overview
SPN 1699=01 Amber LED ON
SPN 1698=01 Red LED ON
Temperature=401
o
F, Pressure=188 PSI
Amber LED ON
1
OVER TEMP
!
1
LEAK
!
Leak Warning
Signal Loss Warning
Over Temperature Warning
1
SIGNAL
LOSS
!
Page 23
USER MANUAL – TPMS GAUGE
23
POWER-UP SCREEN
Description
‣ Performed when power is turned on. Back-light turns on. ‣ All-LCD segments screen displays for 1.5 seconds, then Valor logo screen
displays for 1.5 seconds.
‣ Amber LED is on for 1.5 seconds, and then Red LED is on for 1.5 seconds. ‣ After All-LCD segments screen (3 seconds from power on) display will go to a
TPMS Initializing Screen.
LED
‣ Amber LED is on for 1.5 seconds, and then Red LED is on for 1.5 seconds.
Buttons
‣ No function.
Screen Descriptions
Page 24
USER MANUAL – TPMS GAUGE
24
TPMS INITIALIZING SCREEN
Description
Performed when power is turned on following power-up screen. When same tire location is received twice (assumes all tire locations have been transmitted in rotation) or same tire location is not received for 20 seconds, then exits to Main Screen.
LED
‣ Off.
Buttons
‣ No function.
TPMS
Initializing
Screen Descriptions
Page 25
USER MANUAL – TPMS GAUGE
25
MAIN SCREEN
Description
‣ Displays tire location, tire temperature and tire pressure. Axle position number
is displayed in center.
‣ Tire position is filled within graphic based on position. ‣ Tire axle and position display is learned and populated continually. ‣ If a temperature warning is active for tire location, warning graphic is displayed
and temperature display value is highlighted.
‣ If a pressure or leak warning is active for tire location, warning graphic is
displayed and pressure display value is highlighted.
‣ Temperature value is display in nearest whole Fahrenheit (F) if English units
selected, or nearest whole Celsius (C) if Metric units selected.
‣ Pressure value is display in nearest whole pound per square inch (PSI) if
English units selected, or nearest whole kilo pascal (kPa) if Metric units selected.
‣ TIRE COMM warning is displayed if no sensors are received or all sensors
have lost reception for 100 seconds.
1
123 ºF
123 PSI
!
1
123 ºF 123 PSI
!
N
123 ºF 123 PSI
!
Screen Descriptions
1
123 ºF
123 PSI
!
Page 26
USER MANUAL – TPMS GAUGE
26
MAIN SCREEN
Buttons
‣ Left Button Hold will start forward 2.5 second automatic rotation
decrementing Tire position, then Axel position. When on lowest Axle-Tire position, then repeat from highest Axle-Tire position. Any button press will stop automatic rotation.
‣ Center Button Hold will go to Active Warning Intro screen. ‣ Right Button Hold will start forward 2.5 second automatic rotation
incrementing Tire position, then Axel position. When on highest Axle-Tire position, then repeat from lowest Axle-Tire position. Any button press will stop automatic rotation.
‣ Left Button Press will go to next available Axle position or rotate back to
first axle position.
‣ Center Button Press if in 2.5 second auto rotate sequence, will stop 2.5
second auto rotate sequence.
‣ Right Button Press will go to next available Tire position for axle or rotate
back to first tire position for axle.
123 ºF 123 PSI
1
123 ºF 123 PSI
1
123 ºC 1234 kPa
1
TIRE COMM
!
Screen Descriptions
Page 27
USER MANUAL – TPMS GAUGE
27
ACTIVE WARNINGS INTRO SCREEN
Description
Active Warnings Intro Screen is an introductory screen for entering and reviewing active warnings.
Buttons
‣ Center button press will go to Baseline Confirmation Intro Screen. ‣ Right button press will go to Active Warnings Screen. ‣ Center button hold will go to Main Screen.
Warnings
Screen Descriptions
Page 28
USER MANUAL – TPMS GAUGE
28
ACTIVE WARNINGS SCREEN
Description
Active Warnings Screen displays a list of all active pop-up warnings that have previously been displayed.
Display Items
‣ “No Warnings” is displayed if no pop-up warnings are active. ‣ If at least one pop-up warning is active, the pop-up warning will
display in the list.
Buttons
‣ Center button press will go to Active Warnings Intro Screen. ‣ Left button press, if at least one pop-up warning is active, will go to
next active pop-up warning in list.
‣ Center button hold will go to Main Screen.
No Warnings
1
OVER PRESSURE
Screen Descriptions
Page 29
USER MANUAL – TPMS GAUGE
29
BASELINE CONFIRMATION INTRO SCREEN
Please Note: If you are using software version 1700, your device will
not have access to the Baseline Conrmation screens. This function
is not available for this particular rmware.
Description
Baseline Conrmation Intro Screen is an introductory screen for entering and reviewing baseline pressure value for each tire.
Buttons
‣ Center button press will go to Units Select Screen. ‣ Right button press will go to Baseline Confirmation Screen. ‣ Center button hold will go to Main Screen.
Baseline
Screen Descriptions
Page 30
USER MANUAL – TPMS GAUGE
30
BASELINE CONFIRMATION SCREEN
Description
Baseline Conrmation Screen displays each tires baseline pressure value.
Display Items
‣ TIRE COMM warning is displayed if PGN 65268 SA 51is never
received or lost reception for 100 seconds.
‣ Baseline pressure value is displayed in PSI when English units
are selected, and kPa when Metric units are selected. Dashes are displayed if baseline pressure value for tire was not received.
Buttons
‣ Center button press will go to Baseline Confirmation Intro Screen. ‣ Left Button Press will go to next available Axle position or rotate back
to first axle position.
‣ Right Button Press will go to next available Tire position for axle or
rotate back to first tire position for axle.
‣ Center button hold will go to Main Screen.
Screen Descriptions
1
Baseline
123 PSI
1
Baseline
--- PSI
1
Baseline
123 kPa
TIRE COMM
!
Page 31
USER MANUAL – TPMS GAUGE
31
SELECT UNITS SCREEN
Description
‣ Units Select Screen allows the user to switch the displayed units
between Metric and English.
Buttons
‣ Left button press will change setting between Metric and English. ‣ Right button press will save selected setting, and go to Contrast
Adjust Screen. Center button press will keep setting before screen was entered and go to Contrast Adjust Screen.
‣ Center button hold will go to Main Screen.
Units
Metric
English
Units
English
Metric
Screen Descriptions
Page 32
USER MANUAL – TPMS GAUGE
32
CONTRAST ADJUST SCREEN
Description
‣ Contrast Adjust Screen allows the user to adjust the LCD contrast setting.
Display Items
‣ Contrast bar graph indication displays the current contrast setting. Range
is 0-100% with 5% resolution. Left button will decrease contrast, Right button will increase contrast, and Center button saves contrast.
Buttons
‣ Left button press will decrement contrast by 5% until it reaches 0%. Left
button hold will decrement while button is held until it reaches 0%.
‣ Right button press will increment contrast by 5% until it reaches 100%.
Right button hold will increment while button is held until it reaches 100%.
‣ Center button press will save contrast setting and go to Back-light Control
Screen. Center button hold will go to Main Screen.
Contrast
Screen Descriptions
Page 33
USER MANUAL – TPMS GAUGE
33
BACK-LIGHT CONTROL SCREEN
Description
‣ Back-light Control Screen allows the user to switch the back-lighting
control between an external dimmer “Set by Pin 3” (not available) or set manually in the menu screen “Set Manually”.
Display Items
‣ “Set Manually” sets back-lighting control to Brightness Adjust Screen
setting. “Set By Pin 3” sets backlighting control to pin-3 input via an external dimmer (not available).
Directions continued on the next page.
Back-light Control
Set By Pin 3
Set Manually
Back-light Control
Set Manually
Set By Pin 3
Screen Descriptions
Page 34
USER MANUAL – TPMS GAUGE
34
BACK-LIGHT CONTROL SCREEN
Buttons
‣ Left button press will change setting between “Set by Pin 3” (not
available) and “Set Manually”.
‣ Right button press will save selected setting.
If “Set Manually” is selected, will go to Brightness Adjust Screen.
‣ Center button press will keep setting before screen was entered and
go to Software Version Information Screen.
‣ Center button hold will go to Main Screen.
“Set Manually” Back-lighting Control
‣ “Set manually” back-lighting will set the back-lighting intensity of the
LCD to the setting in Brightness Adjust Screen. Range of setting is 0-100% intensity level.
Back-light Control
Set By Pin 3
Set Manually
Back-light Control
Set Manually
Set By Pin 3
Screen Descriptions
Page 35
USER MANUAL – TPMS GAUGE
35
BRIGHTNESS ADJUST SCREEN
Description
‣ Back-light Adjust Screen allows the user to change the back-lighting intensity
of the LCD.
Display Items
‣ Intensity bar graph indication displays the current intensity setting. Range is
0-100% with 5% resolution. Left button will decrease intensity, Right button will increase intensity, and Center button saves intensity.
Buttons
‣ Left button press will decrement intensity by 5% until it reaches 0%.
Left button hold will decrement while button is held until it reaches 0%.
‣ Right button press will increment intensity by 5% until it reaches 100%.
Right button hold will increment while button is held until it reaches 100%.
‣ Center button press will save intensity setting and go to Software Version
Information Screen.
‣ Center button hold will go to Main Screen.
Intensity
Screen Descriptions
Page 36
USER MANUAL – TPMS GAUGE
36
SOFTWARE VERSION INFORMATION SCREEN
Description
‣ Software Version Information screen display major and minor version
level and software part number. Your software version may vary from the one shown in diagram.
Display Items
‣ “SW:” + major and minor version text is Arial bold 10-point font.
Center aligned.
‣ Valor determines major and minor version numbers. ‣ “SW P/N:” + part number text is Arial bold 10-point font. Center
aligned. Valor determines 4-digit part number and revision letter.
Buttons
‣ Any Button Press will go to Main Screen.
SW: 1.1 SW P/N: 1702A
Screen Descriptions
Page 37
USER MANUAL – TPMS GAUGE
37
UNDER PRESSURE POP-UP WARNING
Description
‣ Under Pressure Pop-up Warning displays immediately ‣ Amber LED is on when tire is more than 12.5% below base line. ‣ Red LED is on when tire is more than 20% below base line. ‣ Warning can be reviewed in the Active Warning Screen.
Buttons
‣ Any button pressed will return to previous displayed screen.
LED will remain on.
1
UNDER PRESSURE
!
Pop-up Warnings
Page 38
USER MANUAL – TPMS GAUGE
38
OVER PRESSURE POP-UP WARNING
Description
‣ Over Pressure Pop-up Warning displays immediately ‣ Amber LED is on when tire is 15% over base line pressure. ‣ Red LED is on when tire is 30% over base line ‣ Warning can be reviewed in the Active Warning Screen.
Buttons
‣ Any button pressed will return to previous displayed screen.
LED will remain on
1
OVER PRESSURE
!
Pop-Up Warnings
Page 39
USER MANUAL – TPMS GAUGE
39
Pop-Up Warnings
OVER TEMPERATURE POP-UP WARNING
Description
‣ Over Temperature Pop-up Warning displays immediately and amber
LED is on, if tire is over 176 degrees F.
‣ Warning can be reviewed in the Active Warning Screen.
Buttons
‣ Any button pressed will return to previous displayed screen.
LED will remain on.
1
OVER TEMP
!
Page 40
USER MANUAL – TPMS GAUGE
40
Pop-Up Warnings
LEAK POP-UP WARNING
Description
‣ Leak Pop-up Warning displays immediately and red LED is on, if
system detects pressure loss of 4.8 PSI (or greater) over 16 seconds.
‣ Warning can be reviewed in the Active Warning Screen.
Buttons
‣ Any button pressed will return to previous displayed screen.
LED will remain on.
1
LEAK
!
Page 41
USER MANUAL – TPMS GAUGE
41
Pop-Up Warnings
TIRE COMMUNICATION POP-UP WARNING
Description
‣ Tire Communication Pop-up Warning displays immediately and no
LED is on, if signal from the Valor Can transceiver is never received or
lost reception for 100 seconds.
‣ Warning can be reviewed in the Active Warning Screen.
Buttons
‣ Any button press will return to previous displayed screen.
LED will remain on.
TIRE COMM
!
Page 42
USER MANUAL – TPMS GAUGE
42
Pop-Up Warnings
SIGNAL LOSS POP-UP WARNING
Description
‣ Signal Loss Popup Warning displays immediately and Amber LED is
on, if Temperature value is 401
o
F and Pressure value is 188 PSI.
‣ Warning can be reviewed in the Active Warning Screen.
Buttons
‣ Any button press will return to previous displayed screen. LED will
remain on.
1
SIGNAL
LOSS
!
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use