VALOR TPMS203 SENSOR User Manual

SENSOR USER MANAUL

TABLE OF CONTENTS

1.1 INTRODUCTION ................................................................................................................................ 3

1.2 WORKING MODE .............................................................................................................................. 3

1.2.1 NORMAL PRESSURE INSPECTING ............................................................................................................. 3

1.2.2 LOW PRESSURE WARNING MODE ............................................................................................................. 3

1.3 INSTALLATION TRANSMITTER ....................................................................................................... 4

1.3.1 INSTALLATION TRANSMITTER ............................................................................................................................... 4

1.3.2 INSTALLATION ID MODULE .................................................................................................................................... 7

1.3.3 REMOVING TRANSMITTER .................................................................................................................................... 9

1.4 PARAMETERS OF THE PRODUCTS ............................................................................................... 9

1.5 FCC's authentication announcement ........................................................................................... 10

1.6 European regulations announcements ........................................................................................ 10

1.7 CE directive announcement .......................................................................................................... 10

1.1 INTRODUCTION

y

r

11.1

Transmitter: Mounted inside the tyre on the centre of wheel

using cradle and steel strap to continuously monitor tyre’s
pressure and temperature every 10-second and transmit data

via RF to the integrated display at 30-second intervals when
tyres are normal or 12-second when the tyres are abnormal.

1

ID Module: ID module is an international patented innovative

technology used to identify tyre’s position without an
activation tool or complicated operation. Each ID module has
an exclusive transmitter with the same ID code. The ID module
is mounted in the display and Trailer ID box to registe
transmitter’s ID code into the display that will recognize wheel
positions as well as the baseline pressures for all tyres.

Stainless Steel Strap: Tyre transmitters are mounted to the
surface of the rim using a stainless steel strap which can be
installed on hundreds of thousands of wheels world wide. It’s the
most reliable and universal method of transmitter installation.

1.2 WORKING MODE

1.2.1 NORMAL PRESSURE INSPECTING

If the pressure and temperature of tire is normal, the transmitter will send pressure and
temperature data every 30 seconds.

1.2.2 LOW PRESSURE WARNING MODE

If the pressure of tire is between 0.66 Bar and 4 Bar, the transmitter will send pressure and
temperature data every 12 seconds.

3