Valor SD-906W User Manual

USER MANUAL

MOBILE MULTIMEDIA SYSTEM WITH

TOUCH SCREEN LCD MONITOR

Model: SD-906W

WIDE

DVD Region Safety Information Installation

Main Unit Display- Monitor Closed . Main Unit Oisplay- Monitor Open .

Remote Control . General Operation . Main Setup Menu .

Video Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Radio Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

RBOS Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Player

MP3IWMA

DVO Player Operation JEPG USB/SO Card

Bluetooth

Media Device Operation ..

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Operation.

Management.

Operation.

Player

Operation.

Operation.....

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operation.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

....

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

...•

DVD Region Management

Some DVD discs can be played onlyincertain playback modes according to the intentionsofthe software. Therefore, some functions may not work as intended. Please be sure to read instructions provided with each disc. This player has been designed to play back DVD software encoded for specific region areas. The unit will play discs labeled "Region

DVO region codes:

1 - USA, Canada 2 - Japan, Europe, South Africa, Middle East

3 - Rep.

4 - Australia, New Zealand, Mexico, South America

5 - Eastern Europe, Russia, India, Africa 6 - China

Korea, Taiwan, Hong Kong, PartsofSoutheast Asia

or "All".

Safety Information

Please read all instructions carefully before installing or operating.

Due to its technical nature, it is highly recommended that your unit or

authorized dealer. This productisonly for useinvehicles with 12VDC negative ground only.

Safety Notes:

The DVD video display feature to prevent driver from distracting. In-dash DVD video functions will be only operated when vehicle

Park and the parking brakeisengaged. rt is illegalinmost states for the driver to view video while

is the vehicle is

To prevent damage or injury:

Make sure to ground the unit securely to the vehicle chassis ground.

Do not remove the top or bottom coverofthe unit.

Do not install the unitina spot exposed to direct sunlight or excessive heat or splashing water.

Do not subject the unit to excessive shock.

When replacing a fuse, just use a new one with the prescribed rating. Using a fuse with wrong rating may cause the unit to malfunction.

To prevent short circuits when replacing a fuse, disconnect the wiring harness first.

Use the provided hardware and wire harness.

You cannot view video while the vehicleismoving. Find a safe place to park and engage the parking brake.

If you experience problems during installation, consult your nearest dealer.

10.

Ifthe unit malfunctions, reset the unit as described on page 4 first. If thereisstill problem, consult

your nearest dealer.

11.

To clean the monitor, wipe only with a dry silicone cloth or soft cloth.

solvents such as paint thinner and alcohol. They can scratch the panel surface and/or remove the printing.

12.

When the temperatureofthe unit falls (asinwinter), the liquid crystal inside the screen will become

darker than usual. Normal brightness will return after using the monitor for a while.

motion.

the in-dash unit will not operate while the vehicleismoving. This is a safety

installedbya professional installer

not use a stiff cloth, or volatile

Additionalnotes:

When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or

other cables with an area

Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

This device complies with part Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause undesired

operation.

0.75mm (AWG 18) or more to prevent voltage drops.

15ofthe FCC rules and regulations.

Installation

Please

read

the manual before installation.

Before You Start

• Disconnect negative battery terminal. Consult a qualified technician for instructions.

•Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

• Insert the supplied keys into the slots as shown, and slide the unit outofthe mounting sleeve .

• Install mounting sleeve into opening, bending tabs to secure.

• Connect wiring harness and antenna as shown on pages 5-6. Consult a qualified technician if you are unsure.

• Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).

•Test for correct operation and slide into mounting sleeve to secure.

•Snap trim ring into place.

•Mount the adapter to any smooth clean surface using the supplied double-sided tape

#2 x 3/8" Phillips head screws.

KEYS

HEX

BOLT

Mounting sleeve opening dimensions 7-3/16" x 2-1/16" (183

ASHER

WASHER

HEX

NUT

PLAINW SPRING

HEX

BOL

MOUNTING

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

SLEEVE

x 53 mm)

Installation

Wiring Diagram

! @

--:B::..::.::....lue_

Rear

White/Black H

@---------,

White

(+)

<:reen/BIack

@)-----'

Groen

(+)

Black

(-)

11l-_:::.:;Bla:.::;ck::.....--er,VlI

Green with White

L---...:.P~in~k

Red

Gray/Black H

Stri~

__@

L.---@

Gray

(+)

-'-@@

VlaIet

(+)

Installation

Wiring Diagram

- Components

Media Device connecting cable

Bluetooth Microphone

Radio Antenna

4 Car Phone (Brown)

Dimmer (Orange)

Rear Zone Audio Out LlR & Rear Monitor 1

* Red: Rear Zone Out R * White: Rear Zone Out L

* Yellow: Rear Monitor

Center RCA Output(Gray) : The center output mustbeconnected toanexternal amplifier for3Dor 6CH

mode.

Subwoofer RCA Output(Blue): The subwoofer outputisavailableinall sound/audio modes.

Left Front Speaker(White, White/Black)

1O.Left Rear Speaker(Green, Green/Black)

11.Right Rear Speaker(Violet, Violet/Black)

12.Right Front Speaker(Gray, Gray/Black)

13.ACC Power Wire(Red): Connect to a +12 volt circuit that is only live when the ignition

14.Parking(Pink): Connect to negative(-) parking brake wire. This wire MUST BE connected with the traffic law. It is the end-user's responsibility to make sure this wire

properly.

15.Back Camera(Green/ White)

16.Ground Wire(Black): Securely fasten the Ground wire to grounded metal part of the car's chassis. If an

you cannot find and secure it with a screw. from areas where the wire will contact the surface.

17.Constant Power Wire(Yellow): Connet the 12V PLUS constant power wire to a live 12 volt wire in the

vehicle. Before making a connection, check that the wire you intend to connect to live wire is not found, route the wire to the car's fuse block and connect it to a live circuit there.

existing boltorscrew to fasten it to, drill a holeinthe metal

ensure a good ground, remove any paint or greese

always live, even when the car's ignition is turned off. Ifa

on.

accordance

connected

18.AUX

19.Rear Monitor

20.PowerAntenna Wire(Blue): Connect to a motorized (power) antenna and/or to a remote turn-on lead for

21.Front and Rear RCA Outputs(Black/Gray)

,>}¥ire

·*·,fte~.onnecting

LlR VIDEO

Camera

amplifier

Replacing

Whenteplacing"a The

SD~@6W

y{henwiriligiscomplete, reconMctthe

thef.use

f~se,

uses

one

h~rri~ss.

.....

......'.

the

8attery

. .

suretouse

10amp

ATOfuse,

.,.

correct

locatedinthe

".'

.....

battery

type

and

..•..

negative

amperage

black

filter

terminal.

to.svoid

box

in-line·wfth,!Re

',,'

.......•.,.';:"

darnli9ing

"',

th~'uilit~

maine

Installation

Wiring

Optional

Diagram

Connections

DVD

Player

Game

Console

Overhead

Monitor

••

Rear

View

Camera

The

diagram

the

connectionofa

for

rear

seat

camera local

canbeconnectedtoeither

dealer

above

illustrates DVD

entertainment,

for

details.

Front

the

connection

playerorgame

while

the

video

Amplifier

Rear

Amplifier

capabilities of

console.

inputtoprovide

output

The

provides

the

rear

zone

video

assistance

unit.

DVD

signal

Headrest

Center

Two

separate

output

for

when

backingupyour

Monitor

Sub

Channel

AudioNideo inputs allow

provides

external

Amp

lifier

Amplifier

both

audio

and

monitors.Arear

vehicle.

Visit

video

view

your

All

items

shown

above

are

optional

and

sold

separately.

Main Unit Display

Monitor

Closed

@@@@

Band

@ AS /

(Auto Store/Preset Scan)

@ Secondary LCD

DISP (Display)

@ Open / Close Monitor @ Eject

(f) USB Port

Card

® EO

Monitor This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will not

obstruct the dash, shifter or any other controls.

Upon installation,

buttons

Notes:

not attempt to move the monitor up/down by hand. Use the ANGLE &",OPEN and IN/OUT

the front panel only.

® Chapter / Track Up

Qjl

Chapter

/Track

Down

@ Fast Reverse

® Mode

@ Power @ MuteNolume

Main Unit Display

Monitor

@----

Open

DIM - Presstochange brightness levelofLCD backlight.

TILT DOWN- Press

TILT UP- Press

INIOUT - Press to move the monitor forward and backward.

Safety Notes:

The DVD video displayofthe in-dash unit will not operate while the vehicle is moving. This is a safety feature only operate when vehicle is

illegalinmost states for the drivertoview video while the vehicle isinmotion.

...todecrease the monitor view angle.

Ato increase the monitor view angle.

prevent driver distraction. In-dash DVD video functions will

Park and the parking brakeisengaged.

Remote Control

Display

Eject

Next Chapter

Previous Chapter

Enter / Play

@ @

Fast Forward

Fast Reverse

Mode

Power Mute @

SRC

Picture

Number Key Audio Select

Volume

Volume Down

Setup

Direction Key [Up]

Direction Key [Left]

Direction Key [Right] @ Direct to Folder

Direction Key [Down]

@ Zoom / Call

Stop / Band / Hang

Subtitle

Audio

Angle

Repeat

Title

Goto

General Operation

Monitor

POWER

On/Off

OPEN/CLOSE

IN/OUT

Press POWER or any other button (except OPEN) to turn the unit on. Press and hold POWER for more than 2 seconds to turn the unit off.

PressOPEN to open or close the monitor. The unit will emit 1 confir-

-mation beeps. close sequence.

careful not to touch the monitor during the open/

Notes:

• The unit will stop if it encounters any obstacles during the open/ close sequence, If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence.

• Pressing OPEN will also turn the unit be

• Audio can

Press theiN/OUT button to move the monitor "IN" and "OUT"

The monitor will move to a 90 degree position first when the angle

the monitor and the deckisless than 90 degrees.

heard while the monitor is closed.

and open the monitor.

Notes:

• The vehicle mustbein on

view video

• As a safety feature, PARKING will show on the display when the

vehicle's parking brake can still

• The video display of the in-dash unit will not operate while the

vehicle

-traction. In-dash video only functions when vehicle is the parking brake to watch video while driving. Refer to local laws

the in-dash monitor.

heard even though the vehicleisin

moving. This is a safety feature to prevent driver's dis-

park and the parking brake applied to

not engaged. DVD,

engaged.Itis

illegal for driversinmost states

AV1

motion.

and AV2 audio

Park or

your area.

Monitor

TILT

Position

With the monitor open, pressing TILT monitor, and pressing TIL

The monitor angle canbeadjustedin6 different positions.

TT to decrease view angle

to increase view angleofthe

the

monitor.

Notes:

•Donot attempt to move the monitor up/down by hand, which will cause severe damage to the unit. Use the front panel buttons or

the remote control only.

• The color Select an angle with the most optimum view for your location.

• When turning off, the last position

-bered that the unit will return to the last position automatically when turned on in the next time. See Page14 for details.

the LCD monitor variesindifferent viewing angles.

the monitor can be remem-

General Operation

Monitor (Left/Right)

Angle

Position

adjust the monitor positon Left/Right:

• Make sure the monitor

• Grasp both side on side until the mechanism is fully extended.

return the monitor mechanismtothe "closed" position

• Grasp both side of the monitor near the bottom and gently push on the side that

• A slight click will heard when the monitor mechanism Refer to the diagram below.

isinthe "OUT" position.Press IN/OUT

the monitor near the bottom and gently pull

extended until the mechanism is closed.

closed.

Optional

Selection

Mode

Volumn

Mute

Dimmer

Display

Mechanism Closed

Press MODE to select between RADIO, DVD, functions that available. Mode operation are indicated (On Screen Display) or

With the monitor open, press the screen

and press RADIO,DVD,AV or

desired source.

Adjust volume by rolling the volumn button

Press MUTE Press MUTE button again to cancel the MUTE status.

Press DIM (1

minimum / 5 maximum).

With the moniter under closed, pressing DISP can display the clock or the radio rate

work when the monitor DISP When it'sinDVD and the general operation buttonsindisplay.

silence audio.And the MUTE icon will appearinOSD

adjust the backlight level of TFT LCD.

the secondary LCD.

AV2inthe OSD menu bartoselect the

the secondary LCD. The DISP function does not

open except in the DVD mode. Press

mode, it will show the information of the

Mechanism Fully Extended

AVX

inputs or other

the OSD

display the OSD menu bar

the front.

DVD

the

General Operation

Clock

Set

With the monitor closed:

Press DISP button(4) to display the clock.

Press and hold DISP button(4)until a confirmation beep is

heard, then release.

Press..or T to adjust the hours and

....

or~to adjust the minutes.

+ 29 hidden pages

Valor SD-906W User Manual

USER MANUAL

Table of Contents

Safety Information

Installation

Remote Control

Dimmer

Display