Vaisala CBL210780-1MSP, CBL210780-1M User Manual

CBL210780

1000 [39.4]

500 [19.4] 500 [19.4]

< +60 °C [+ 140 °F] < +180 °C [+ 356 °F]

mm [in]

1 2

M12-5

M212288EN-A

Quick Guide

The high-temperature cable CBL210780-1MSP / CBL210780-1M is intended for use in high-temperature applications such as heat-sterilized incubators. The 500 mm (19.4) section of the cable on the connector side (see Figure 1 (page 1)) can be used in temperatures of up to +180 °C (+356 °F).

For wiring instructions, see the probe-speciﬁc documentation.

M12-5 High-Temperature Cable

CBL210780-1MSP / CBL210780-1M

Figure 1 CBL210780-1MSP / CBL210780-1M Dimensions and Temperature Limits

The open end of the cable (500 mm (19.4 in) section starting from the ferrules) must be placed into

ambient temperature, at maximum to +60 °C (+140 °F).

2 The connector side of the cable (500 mm (19.4 in) including the connector) can be placed into

temperatures of up to +180 °C (+356 °F).

3 For the operating temperature limits of the probe that is connected to the cable, see probe-speciﬁc

documentation.

Note the following precautions when using the cable:

CAUTION!

from the ferrules) must be placed into ambient temperature (max. +60 °C (+140 °F)). See Figure 1

(page 1).

CAUTION!

the cable matches your application.

Due to heat conduction, a 500 mm (19.4 in) section of the open end of the cable (starting

Always ensure that the operating temperature speciﬁcation of the probe connected to

All rights reserved. Any logos and/or product names are trademarks of Vaisala or its individual partners. Any reproduction, transfer, distribution or storage of information contained in this document is strictly prohibited. All speciﬁcations — technical included — are subject to change without notice.