VADDIO DOMEVIEW HD-20, DOMEVIEW HD-19, DOMEVIEW HD-18, HD-19, HD-18 Installation And User Manual
...
Installation and User Guide
V
A
D
D
R
V
V
--R
DII
D
R
EESSIISSTTAANNTT
AADDDDIIOO
A
V
W
EEAATTHHEER
W
FFOORR TTHHEE
Part Number: 998-9200-200 (North America)
998-9200-201 (International)
™
O
O
™
HHDD--2200,
P
EENNDDAANNTT
P
,
HHDD--119
D
D
O
O
9
AANNDD
M
M
M
OOUUNNTT
M
VII
E
E
V
D
D
HHDD--118
8
E
W
E
W
OOMMEE WWIITTHH
PPTTZ
Z
C
C
AAMMEERRAAS
H
H
™
™
EEAATTEERR
S
H
H
B
LLOOWWEERR
B
D
D
©2011 Vaddio - All Rights Reserved ● DomeVIEW HD Weather-Resistant 12” Dome ● Document Number 324-0188 Rev. B
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome
p
Overview:
The Vaddio 12” DomeVIEW HD Series Dome
Enclosures for the ClearVIEW HD-20, HD-19 and HD-18
PTZ cameras are attractive and robust integrated HD
security solutions for indoor and light-duty outdoor
applications. The DomeVIEW HD Series offers three
distinctly different products. In all cases, the cameras
are not included. This manual covers the WeatherResistant Outdoor Pendant Dome Enclosure.
The DomeVIEW HD Weather-Resistant Outdoor
Pendant Dome is designed for use under a building
overhang, canopy or any other building structure and out
of the direct elements. Each enclosure includes a 12”
optical-grade polycarbonate dome smoke tinted dome
metal back can, UV protected grey plastic shroud,
heater/blower system and mounting hardware.
The pendant mount is a 1.5” NPT pipe adapter attached
to the top of the dome and is anchored through the
plastic shroud, metal back can and gasket for a strong
and weather-tight top seal.
Accessories include a Wall Mount Kit, a Wall Mount with
Pole Mount Kit (for poles 3”/76.2mm to 10”/254mm) and
a Structure Mounting Box Kit which uses a 1.5” NPT
thread adapter.
Weather Resistant 12” Outdoor Pendant Mount Dome (with
Smoke Tint Optical-Grade Dome (shown with 1.5” NPT
Pipe and HD-18 Camera - Not Included)
The DomeVIEW HD Series Domes are an excellent way to securely mount the ClearVIEW HD-20, HD-19 and
HD-18 PTZ cameras for a wide range of HD video applications.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and outdoors protected from the direct elements, and with the provided power supply and
cabling. The use of a power supply other than the one provided or outdoor operation has not been tested and
could damage the device and/or create a potentially unsafe operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Use only the power supply provided with the system. Use of any
unauthorized power supply will void any and all warranties.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Manual 342-0188 Rev. B Page 2 of 8
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermitten t connections which
can result in the RS-232 control line failing and locking up, and/ or compromising the HSDS™
signals. For best results please use standard RJ-45 connectors and test all cables for proper
in-outs prior to use and connection to Vaddio product.
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome
y
Anatomy of the Weather-Resistant 12” Pendant Mount Dome
The enclosure will come partially assembled.
1.5” NPT Pipe Flange: Fits 1.5” NPT pipe or wall
mount kit with 1.5” NPT male threads*
Rubber gasket to seal between pipe flange
and plastic shroud*
UV protected plastic
shroud with drip edge*
Three (3) 10-32 x .5” pan head screws attach
through back of metal back can to the 2.5”
stand-offs*
Sealed metal back can with weather
sealing gasket applies around flange*
Three (3) 2.5” long 10-32 threaded F to F .5” Hex
stand-offs support the camera platform*
Universal Camera Platform with Heater/Blower System*
Four (4) ¼’-20 Keps Nuts secure the 1.5” NPT
pipe flange to the enclosure*
Three (3) .75” long 10-32 threaded
M to F .5” Hex stand-off extensions
Use with HD-20 Camera Onl
Not Assembled
Two ¼”-20 x 5/8” screws attach HD-18 camera to platform
Two ¼”-20 x 3/8” screws attach HD-20 camera to platform
Three (3) 10-32 x .5” Pan Head Screws
attach through the camera platform to the
2.5” stand-offs*
Vaddio HD-20 or HD-18 PTZ Camera
Not Assembled
12” Smoke tinted dome with three (3)
stainless steel screws and metal
retention ring attached
*
*These parts are pre-assembled.
Not Assembled
DomeVIEW HD Weather-Resistant 12” Outdoor Pendant Mount Dome Manual 342-0188 Rev. B Page 3 of 8
Loading...