Vaddio CLEARVIEW-HD20SEQCCU Quick Start Guide

TECH SPEC

Universal CCU

CAT-5 Version of the Quick-Connect

Universal CCU for Vaddio WallVIEWTM HD-20, HD-19 and HD-18 PTZ Camera Systems

The Universal CCU is the new Quick-Connect CCU for the WallVIEW HD-20, HD-19 and HD-18 Pan/Tilt/Zoom Camera Systems. The Universal CCU will have three main models - CAT-5 version, Wireless version for the HD-20 and Optical version for all cameras.

The CAT-5 Universal CCU uses HSDSTM (high speed differential signaling), an active video transmission system, to deliver high-quality HD video over standard CAT-5 cabling up to 500’ (152.4m) with virtually no loss in video quality or latency. One of the most ﬂexible attributes the Universal CCU has is at the output section. It has HD-SDI or SDI outputs, HDMI and HD Analog Component (YPbPr) outputs, all which can be used concurrently. Resolution ranges from 480i up to and including 1080p/60 on all outputs.

The Universal CCU has a new industrial design that simpliﬁes the operation of the CCU. The back-lit blue LED screen displays up to eight parameters at a time and the camera’s model number so the interrelationship of the controls can easily and quickly be read and understood. The silicon back-lit blue buttons are soft and silent for critical studio adjustments. All of the controls are adjusted with the menu rotary encoder with select and cancel buttons.

Universal CCU for VaddioTM PTZ Cameras

HD-20

HD-19 HD-18

The WallVIEW CCU series for ClearVIEW HD-20, HD-19 and HD-18 allows the user to adjust Red and Blue Gain, Iris functions, Chroma, Pedestal, Knee, Detail, Gamma and Gain on the cameras. These controls allow the camera to deliver a more accurate representation of the image that is being captured. Other added advantages include the ability to color match multiple cameras and eliminate the need to use automatic exposure and color settings. User-deﬁnted adjustments may be stored using three scene buttons.

Overall, the WallVIEW Systems using the Quick-Connect Universal CCU is superb for a wide range of high deﬁnition shooting applications. It is also great where adjusting the color and brightness levels of one or multiple cameras is critical, as in houses of worship, corporate boardrooms, live event production and distance-learning applications.

INCLUDES

• Choice of Camera HD-20, HD-19 (black or white) or HD-18 (black or white)

• Quick-Connect Universal CCU with Rack Mount Ears

• EZIM CCU Slot Card

• 36 VDC PowerRiteTM Power Supply

• Vaddio IR Remote Commander

•EZCamera

• CONCEAL

• Documentation

TECHNICAL FEATURES

Control Adapter

Wall Mount and Mounting Hardware

TECHNICAL FEATURES

WallVIEW Universal CCU CAT-5 Versions with CONCEAL Mounts

(left to right), HD-20, HD-19 (black) and HD-18AW (Arctic White)

CCU Controls The CCU functions on the CAT-5 versions for the HD-20 and the HD-18 include Red and Blue gain, Iris functions, Chroma, Pedestal, Knee, Detail, Gamma and Gain. The HD-19 system controls include Red and Blue gain, Iris functions, Chroma, Brightness OPWB, detail, Gamma Shutter, Image Stabilization, Noise Reduction and Gain

Simultaneous Outputs The Universal CCU has HD-SDI or SDI outputs, HDMI and HD Analog component (YPbPr) outputs, all of which can be used concurrently. Resolution throughout ranges from 480i up to and including 1080p/60 on all ouputs. The HDMI out is HD only (720/1080i/1080p).

TECHNICAL FEATURES CONTINUED

Large LCD Display The large blue back-lit display shows the CCU type, camera model number and up to eight parameters at a time.

Menu items such as Y-Gain, distance controls, screen brightness and contrast are also available.

Simple User Front panel controls are easy to read and operate. The back-lit silicone rubber buttons are soft, easy to read and Interface silent, so even in live sound stage shoots, the cameras can be adjusted allowing for better camera performance.

HSDS Technology Using the Vaddio HSDS (high speed differential signaling) of the analog video, and the control signals, allows the

distance between the ClearVIEW cameras and the Universal Quick-Connect CCU to be up to and including 500’ (152.4m) using three plain CAT-5 cables. One CAT-5 cable is for video, one is for power and one is used for control.

Made in USA The Quick-Connect Universal CCU is made in the USA, at Vaddio headquarters, Minneapolis, Minnesota.

EZIM Slot Card ﬁts into the

card slot of the HD-20, HD-19

REAR PANEL CONNECTIONS

and HD-18 Cameras

2 3 4

Quick-Connect Universal CCU, CAT-5 Version

1) Power Connector: 36 VDC, 2.78A 5.5mm OD x 2.5mm ID Coax

Connector, Positive Center

2) Red RJ-45 36, VDC ouput: Out to EZIM CCU Slot Card mounted into the back of the camera

3) Green RJ-45, RS-232 IN: Control input for Vaddio Joystick Controllers

4) Blue RJ-45, RS-232 OUT to Camera: Control output to the RS 232 Port of the camera

5) Local Tally: Tally contact from controller will light the camera’s red Tally Light

6) Camera Settings: 8-pos Dip Switch provide access to Y-Gain, cable length, color space and LCD display controls

7) Yellow RJ-45, Video from Camera: Differential video signals are returned from the camera

8) YPbPr Output: On DE-15 (HD-15) connetor, resolutions range from 480i to 1080p/60 on the analog connector

9) HDMI Connector: HDMI will provide HD Signals only including 720p, 1080i and up to 1080p/60.

10) Gold BNC Connector: Carrier class edge mount BNC capable of transmitting a 3Gb/s single link HD-SDI resolutions

SPECIFICATIONS

Part Numbers 999-6907-100 WallVIEW Universal CCU HD-18 CAT-5 version - (North America)

999-6907-100AW WallVIEW Universal CCU HD-18 CAT-5 version - Arctic White: (International) 999-6947-100 WallVIEW Universal CCU HD-19 CAT-5 Version - (North America) 999-6947-100AW WallVIEW Universal CCU HD-10 CAT-5 Version - Arctic White: (International 999-6957-100 WallVIEW Universal CCU HD-20 CAT-5 Version - (North America)

International 999-6907-101 WallVIEW Universal CCU HD-18 CAT-5 Version - (International)

999-6907-101AW WallVIEW Universal CCU HD-18 CAT-5 Version - Arctic White: (International) 999-6947-101 WallVIEW Universal CCU HD-19 CAT-5 Version - (International) 999-6947-101AW WallVIEW Universal CCU HD-10 CAT-5 Version - Arctic White: (International) 999-6957-101 WallVIEW Universal CCU HD-20 CAT-5 Version - (International)

User Controls HD-20 and HD-18: White Balance (auto, manual) Red and Blue Gain, Pedestal, Knee, Chroma, Gamma, Detail, Gain, Iris, 3-Scene Presets, Select and Cancel

HD-19: White Balance (auto, manual), OPWB, Red and Blue Gain, Chroma, Brightness, Gamma, Detail Iris,

Connectors 5.5mm OD x 2.5mm ID Power Connector, RJ-45 for 36 VDC on 4pr. CAT-5, RJ-45 for RS-232 IN, RJ-45 for RS-232 OUT, 2-pos

Molex 5.0mm Euro Connector for Tally, 8-pin Dip Switch for camera functions, RJ-45 for Differential Video Return, DE-15 for YPbPr out, HDMI for HDMI, and a BNC for HD-SDI

Video Adjustments In Menu, Y-Gain and Cable Distance Presets CAT-5 Cable Distance Up to and including 500’ (152.4m) Power Supply 36VDC, 2.78 Amp Switching Power Supply (International systems receive the Euro and UK power cables) Dimensions 1.72” (43.7mm) H x 18.93 (480.8mm) W (with rack ears) and 7” (177.8mm) D Weight 3.45 lbs (1.5649kg)

3-Scene Presets, Select and Cancel. In menu Shutter Control, image stabilization and noise reduction.

Learn more about our complete line of cameras and camera control equipment at 800-572-2011 or vaddio.com

© 2012 Vaddio – All Rights Reser ved. Reproduction in whole or in part without written permission is prohibited. Specications and pricing are subject to change without notice. Vaddio, ClearVIEW, Quick-Connect, DomeVIEW and PowerRite, are registered trademarks of Vaddio. All other trade marks are property of their respective owners.

011912-1 Rev C