Vaddio 999-96750-400 Specifications

Tech Spec

OneLINK Bridge
AV Interface for HDBaseT Cameras

For Vaddio HDBaseT Cameras: 999-9595-000/001/009
For Vaddio HDBaseT Cameras with Polycom Codecs:999-9645-000/001/009
For Vaddio HDBaseT Cameras with Cisco Codecs: 999-9675-000/001/009

Features

n Converts any conference room to a BYOD environment, delivering a USB stream for soft conferencing clients
n Incorporates Vaddio’s market-leading AV Bridge functionality, connecting professional AV equipment to PC

applications via USB 3.0 media stream

n Simple, clutter-free camera installation– power, control, video, and streaming over one Cat-5e or better cable
n Extends installation distance for HDBaseT cameras up to 100 m (328 ft.)
n Video with audio:Simultaneous uncompressed USB 3.0, HDMI 1.4b, and 3Gb/s HD-SDI; passes IP stream if

available from source

n Two balanced audio inputs – line level or mic level; two balanced audio outputs, line level
n Control via web interface or Telnet; passes web-based, Telnet, and RS-232 serial control to connected devices
n Front panel buttons: Display the IP and MAC address for the device on the display outputs; reboot
n Status lights to show activity – USB, Network, Source, and OneLINK

Connector Panel

n 48 VDC 1.36 AMP – Connect only the power supply provided with the unit.
n OneLINK Digital Camera Interface – All connectivity to the HDBaseT camera or switcher (or to the OneLINK

HDMI EZIM): power, network, control, video, and (if available) audio

n HDMI – Video from the connected camera or other source
n USB 3.0 – Uncompressed video output with PCM audio for conferencing applications
n HD-SDI – Video output from the camera
n Network – IP streaming (if available from source) and control
n RS-232 – Control pass-through to the camera
n Audio I/O Line Out 1 and Line Out 2 – Far-end audio from conferencing application or as configured in the

audio matrix

n Audio I/O Mic/Line In 1 and Mic/Line In 2 – Microphone or other audio inputs

What's Included

n OneLINK Bridge camera interface
n 48 VDC, 1.36 A power supply with AC cord set(s)
n 3-position, 3.5mm Phoenix connector plugs (4)
n USB 3.0 cable, 6ft (1.8 m) Type A to Type B
n RS-232 adapter (RJ-45F to DE-9F)
n Quick-Start Guide

Document Number 411- 0009-10 Rev C – September 2018

Tech Spec for the OneLINK Bridge AV Interface

Connections

Conferencing installation with HDBaseT camera (RoboSHOT 20 UHD shown)

Note

To discover the IP address for the OneLINK Bridge, press the Display IP and MAC Address button. The information
is overlaid on the HDMI, HD-SDI, and USB video outputs.

Specifications

Video outputs Simultaneous HDMI, USB 3.0 and HD-

SDI

Audio inputs Two mic/line-level channels with

noise/echo cancellation; phantom
power available

Mixing 6 x 10 audio mixer; audio is routable through all outputs
USB 3.0 Streaming Uncompressed video with PCM audio IP Streaming Passes the stream from the camera (or

Control Features Web interface for configuration via browser

Operating
Environment

Storage
Environment

Dimensions Height 1.72 in. (4.4 cm); Width 8.375 in (21.3 cm); Depth 6.0 in. (15.2 cm)
Weight 3.3 lb (1.5 kg)

Telnet API for third-party external control
USB Human Interface Device (HID) for room audio controls

32°F to 104°F (0 °C to +40°C), 15% to 80% relative humidity, non-condensing

-4°F to 140°F (-20° to +60° C), 15% to 80% relative humidity, non-condensing

EZIM (HDMI kits only): 1.2 lb (0.54 kg)

Resolution and
frame rate

Audio outputs Two balanced line-level audio outputs

Power 48 VDC, 1.36 A

HDMI: Up to 2160p/30
USB: Up to 1080p/60
HD-SDI:Up to 1080p/60

other source), if enabled.