Vaddio 999-9530-000, 999-9590-000 Specifications
r
y
OneLINK™ Digital Camera Interface
BLURB
Vaddio™ OneLINK System for RoboSHOT™ HDMI Cameras
HDBaseT™ Video, Power and Control Extension over a Single Cat-5e or Better Cable
Part Numbers: 999-9590-000 North America, 999-9590-001 International
Vaddio’s OneLINK System for RoboSHOT HDMI
cameras is an HDBaseT camera extension system
that extends HDMI video, power and control on a
single Cat-5e/6 cable at distances of up to 328’
(100m). OneLINK allows for simplified, economical
and faster installations. The OneLINK system sends
and regulates power to the camera, provides bidirectional control channels for Ethernet and RS-232
and transmits/receives uncompressed HDMI video
up to 1080p/60 and up to 2160p/30 for the future.
The system consists of the small OneLINK EZIM (EZCamera™ Interface Module) camera interface at the camera
location and the OneLINK HDMI Interface. The EZIM provides the required camera connectivity and is mounted t o
the underside of the RoboSHOT HDMI camera’s Thin Profile Wall Mount with two 6-32 x .188” black mounting
screws. All the 12” (305mm) patch cables on the camera end are provided with the OneLINK system including an
HDMI cable, a power cable and two Cat-5e cables for network and RS-232. The Thin Profile Wall Mount can be
mounted directly to a 2-gang sized electrical box for conduit installations or direct ly to the dry wall with wall anchors.
From one end to the other, the OneLINK system provides system integrators with an easy to install, simple and
elegant, single cable camera extension solution, which exemplifies Vaddio’s main tenet; The Art of Easy.
Images: OneLINK HDMI EZIM™ Camera Interface (above) and
OneLINK HDMI Interface Front Panel (below).
W
HAT’S INCLUDED
The OneLINK System for RoboSHOT HDMI Cameras
includes the following items:
One (1) OneLINK HDMI Interface.
One (1) OneLINK EZIM for the camera side.
One (1) 48 VDC, 1.36 Amp Switching Power Supply
One (1) AC Cord Set
One (1) 12” (305mm) HDMI Cable
One( 1) 12” (305mm) EIAJ-04 to EIAJ-04 Power Cable
Two (2) 12” (305mm) Cat-5e Patch Cables for Ethernet
and RS-232
Two 6-32 x .188 Black Phillips flat head screws to attach
the EZIM to the underside of the RoboSHOT Wall Mount
One (1) Quick Start Guide for OneLINK
Notes: Cameras are Sold Separately
Full length manuals available at vaddio.com
Vaddio ● Toll Free 800-572-2011 ● Phone 763-971-4400 ● FAX 763-971-4464 ● vaddio.com Page 1 of 2
K
Single Cat-5e/6 Cable Solution
The OneLINK System requires a single Cat-5e or bette
cable to transport power to the PTZ camera, provide bidirectional Ethernet and RS-232 communication and return
HDMI from the camera up to a distance of 328’ (100m).
The Technology
Vaddio’s product development group has relentlessl
strived to use the newest, the best, most relevant and
standards based HDBaseT technologies available today.
The OneLINK HDMI is simply the result.
Another Fine Point
The OneLINK system was conceived,
designed and manufactured in the
USA at Vaddio’s HQ in Minnetonka,
Minnesota.
EY TECHNICAL FEATURES
S
(
pply
YSTEM DRAWING
Configuration Example
OneLINK HDMI - EZIM Camera Interface
RoboSHOT 30 HDMI Camera
(Cameras sold separately)
Power
Ethernet
OneLINK HDMI Interface
RS-232
HDMI
OneLINK Digital Bus
Video, Power and Control up
to 328’
100m) on Cat-5e/6
48 VDC, 1.36 Amp
Power Su
HDMI Video
Ethernet
RS-232
Cat-5e
Ethernet
Another Simulated Dolphin Pool Video
Precision Camera Controller
Camera Configuration
and Control
G
ENERAL SPECIFICATIONS
Part Numbers
Compatible Cameras Cabling Kit for RoboSHOT 12 HDMI and RoboSHOT 30 HDMI
Video Support HDMI resolutions up to 1080p/60 for RoboSHOT HDMI cameras and 2160p/30 for the future.
RS-232 Support Pass-through
Ethernet Support Pass-through
Camera Power Support 12 VDC, 3 Amp from EZIM to Camera.
Cabling Distances
OneLINK Interface Power Supply 48 VDC, 1.36 Amp
Connectors on OneLINK Interface
Connectors on OneLINK EZIM OneLINK Port on Shielded RJ-45F, HDMI Input Receptacle, Ethernet on shielded RJ-45F with
OneLINK Interface Dimensions
(H x W x D - not including space-time)
OneLINK EZIM Dimensions (H x W x D) 3.861” (98.07mm) H x 4.310” (109.47mm) W x 1.24” (31.5mm) D
OneLINK Interface Weight 1.553 lbs. (703.1g)
OneLINK EZIM Weight 0.553 lbs. (249.5g)
Operating Temperature/Humidity 0°C (32°F) to 40°C (104°F), 20% to 80% Relative Humidity
Learn more about our cameras, audio devices and controllers at 800-572-2011 or vaddio.com
©2015 Vaddio - All Rights Reserved. Reproduction in whole or part without written permission is prohibited.
Specifications and pricing are subject to change without prior notice or obligation.
EZIM and EZCamera
Document 00091515-2 Rev B, SD: 69191.4
are trademarks of Vaddio. All other trademarks are the property of their respective owners.
999-9590-000: OneLINK System for Vaddio RoboSHOT HDMI Cameras (North America)
999-9590-001: OneLINK System for Vaddio RoboSHOT HDMI Cameras (International)
328’ (100m) over Cat-5e (Best Practices - When in doubt of EMI or RF interference in the area
that OneLINK is being installed, use shielded Cat-6 cable).
OneLINK Port on Shielded RJ-45F, HDMI Output Receptacle, Ethernet on shielded RJ-45F
with LEDs, RS-232 on shielded RJ-45 connector, Power in on 5.5mm OD x 2.5mm ID Coaxial
connector (positive Center), IR Forward on 3-pin Phoenix-style connector
LEDs, RS-232 on shielded RJ-45 connector, Power out on EIAJ-04 connector
1.72” (43.7mm) H x 8.375” (212.7mm) W x 6.00” (152.4mm) D
Vaddio, RoboSHOT, OneLINK,
Loading...