Page 1
Explanation of WARNING Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence dangerous voltage within the
inside of the product that may be sufficient level to constitute a risk of electric
shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and servicing instructions.
Safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this LCD TV near water.
6) Clean only with dry cloth. Do not use liquid, alcohol, or aerosol cleaners.
7) Do not block any ventilation openings. Install your LCD TV in a well ventilated
area.
8) Keep your LCD TV away from moisture, excessive dust and any heat sources,
such as radiators, heat registers, stoves, or any other apparatus (including
amplifiers) that produce heat.
9) Do not remove the back cover. There are no user-serviceable parts inside.
10) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
11) Protect the power cord from being walked on or pinched particularly at plugs,
receptacles, and the point where they exit from the LCD TV.
12) Never rest objects on the power cord or place it in high traffic areas.
13) Only use attachments/accessories specified by the
manufacturer.
14) Use only with stand, tripod, bracket, or table specified by
the manufacturer, or sold with the LCD TV. When a cart is
used, use caution to avoid injury from tip-over.
15) Unplug this LCD TV during lightening storms or when
unused for long periods of time.
16) Refer all servicing to qualified service personnel-Servicing may be required if the LCD TV has been damaged in any way, such as
power-supply cord or plug damage, liquid has been spilled or objects have fallen
into the LCD TV, the LCD TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Page 2
17) Do not expose your LCD TV to dripping or splashing, and do not place objects
filled with liquids on it.
18) The Shock Hazard Marking and Associated Graphical Symbol are provided on the
back panel of unit.
19) This product is only to perform the useful function of entertainment and visual
display tasks are excluded.
20) Wall or ceiling mounting: When mounting the product on a wall or ceiling, be sure
to install the product according to the method recommended by the manufacturer.
Use only the mounting hardware recommended by the manufacturer. This is a
safety feature.
21) The readily operable appliance coupler will serve as the disconnect device of this
apparatus.
22) The apparatus must be connected to a mains socket outlet with a protected
earthling connection.
WARNING: To reduce the risk of fire or electric shock, do not expose this
LCD TV to rain or moisture.
CAUTION: Any damage caused by incorrectly attempting to mount this
LCD TV is not covered under the terms of the manufacturers warranty.
Page 3
Content
ACCESSORIES................................................................................................................. 1
FRONT PANEL BUTTONS ................................................................................................ 2
BACK PANEL BUTTONS................................................................................................... 3
REMOTE CONTROL......................................................................................................... 4
INSTALLATION.................................................................................................................. 6
Connecting RF antenna and Cable TV ....................................................................... 6
Connecting to DVD / Set Top Box............................................................................... 6
Connecting to the Headphone .................................................................................... 8
Connecting to a Computer.......................................................................................... 8
Connecting with the power cord ................................................................................. 9
BASIC OPERATION ........................................................................................................ 10
Turning on the LCD TV............................................................................................. 10
Power On/Off............................................................................................................ 10
Select input source ................................................................................................... 10
Volume Adjusting ...................................................................................................... 10
INFO ......................................................................................................................... 10
Electronic Program Guide (EPG)...............................................................................11
Channel Select ..........................................................................................................11
List .............................................................................................................................11
Favorite Channels..................................................................................................... 12
Sleep Time Setting.................................................................................................... 12
Zoom ........................................................................................................................ 12
MTS Selecting .......................................................................................................... 12
C.C Mode ................................................................................................................. 12
Using the OSD function ............................................................................................ 12
ADVANCED OPERATION—OSD MENU ........................................................................ 13
PICTURE Menu........................................................................................................ 13
SOUND Menu........................................................................................................... 14
TIME Menu ............................................................................................................... 15
OPTION Menu.......................................................................................................... 16
PARENT Menu ......................................................................................................... 18
TV Menu ................................................................................................................... 21
TECHNICAL SPECIFICATION ........................................................................................ 23
SAFETY PRECAUTIONS ................................................................................................ 24
CARE AND MAINTENANCE ........................................................................................... 25
TROUBLESHOOTING..................................................................................................... 25
Page 4
1
ACCESSORIES
Thank you for purchasing this LCD-TV.
This LCD-TV package comes with:
LCD TV
User’s Guide
Warranty Card
Remote control
Battery AA x 2
Power Cord
VGA Cable
RCA A/V Cable
Page 5
2
FRONT PANEL BUTTONS
Volume Down
Volume Up
On Screen Display Menu On/Off
CH Down
CH Up
Input Source Selection (Enter)
Power ON/OFF button
Power LED Indicator/ Remote Control Receiver
Page 6
3
BACK PANEL BUTTONS
A
B C D E F G H I J
A Power (AC input)
B Headphone Jack
C PC/ DVI Audio input
D VGA signal input
E Composite Video input
F YPbPr signal input
G AV/ S-Video/ YPbPr signal Audio input (left/right)
H S-Video input
I HDMI Input Terminal
J Cable/ Air TV input
Page 7
4
REMOTE CONTROL
Page 8
5
Remote control button function as follows:
1 INPUT Input source select
2 ENTER Confirm selection or enter selected menu
3 TV Direct to TV source
4 - VOL + Adjust volume UP/DOWN
5 LIST Select channel from program list
6 GUIDE Select electronic program guide (EPG)
7 0~9, - number Directly channel select
8 POWER Power ON/OFF
9 UP/ DOWN/ LEFT/
RIGHT
Move the cursor In OSD menu: UP/ DOWN for OSD function
select and LEFT/ RIGHT for function adjust
10 MENU On Screen Display (OSD) menu ON/OFF
11 ▼ CH ▲
Adjust channel UP/DOWN
12 FAV Select from preset Favorite Channels
13 ZOOM Adjust window size
14 MUTE Volume mute ON/OFF
15 INFO Display current information
16 SLEEP Set timer to turn off TV
17 MTS Select Mono, Stereo or SAP sound
18 C.C
Select caption mode
19 LAST
Return to previous channel
Page 9
6
INSTALLATION
Connecting RF antenna and Cable TV
Make sure the power is OFF before installing your LCD TV.
1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV
channels into memory with Auto Scan function when using an antenna TV system. This air
input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV
system (ATSC) can be found by the scanning of “AIR” with Auto Scan function. See page 21.
2) Cable TV: Connect the LCD TV to the cable with CATV and Digital cable. Preset the cable TV
channels into memory with Auto Scan function when using a cable TV system. The cable
input jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV)
and Digital cable system (clear QAM) can be found by the scanning of “Cable” with Auto Scan
function. See page 21.
Note: Users can select either Air or Cable TV cable to be connected to the TV IN jack. To
watch both of them, use an adapter to connect both Air and Cable cables to the jack.
Connecting to DVD / Set Top Box
Connect Video/Audio cables from compatible devices into the back panel of LCD TV.
1) With AV cable:
RF Cable, CATV/ Digital cable
or Adapter (not supplied)
VCD or DVD Player
RCA A/V Cable
Page 10
7
2) With S-Video cable:
3) With YPbPr cable:
4) With HDMI cable:
VCD or DVD Player
A
udio Cable
(not supplied)
VCD or DVD Player
A
udio Cable
(not supplied)
HDMI Cable (not supplied)
S-Video Cable (not supplied)
YPbPr Cable (not supplied)
VCD or DVD Player
(DVD Player should have
the HDMI output terminal)
Page 11
8
5) With HDMI-DVI cable:
Connecting to the Headphone
Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold
separately).
Connecting to a Computer
1) With VGA Cable:
Connect the VGA cable from VGA output of the computer to the VGA terminal input of your
LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the
audio input terminal (green) of the LCD TV.
Headphone
(not supplied)
VGA 15 Pin Cable
PC
HDMI-DVI Cable
(not supplied)
Audio Cable (not supplied)
VCD or DVD Player
(DVD Player should have
the HDMI output terminal)
PC Audio In Cable (not supplied)
Page 12
9
2) With HDMI-DVI Cable:
Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input
of the LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer
to the audio input terminal (green) of the LCD TV.
Connecting with the power cord
Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have
been completed, and plug the other end of the power cord into a correctly grounded electrical
outlet.
HDMI-DVI Cable (not supplied)
PC
PC Audio In Cable (not supplied)
A
C power socket
Power Cord
Page 13
10
BASIC OPERATION
To operate your LCD TV, you may use the TV remote control or top panel buttons to select input
source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1. Connect external equipment properly.
2. Insert the power plug and the power LED indicator will light orange.
Power On/Off
To turn the LCD TV on/off :
Press the POWER button under the LCD TV, or press the POWER button on your remote control
to turn on/off the TV. The power LED indicator lights blue when the LCD TV is on.
Select input source
To select the required input source:
Press the INPUT button on the remote control, Use ▲▼ to select the required input source
between TV, AV, S-Video, YPbPr, HDMI, and D-SUB.
To confirm the selection, press ENTER.
Volume Adjusting
Press – VOL + to adjust volume.
To turn off the volume, press MUTE.
If you want to restore volume, press MUTE again, or press – VOL + directly.
INFO
To display the current information of the LCD TV: Press INFO, and the current state will be displayed
on the screen. (It shows all or some of the information about Input, Channel, Resolution, Audio Type,
etc., depending on what input source it is in.)
* The picture here shows an example of the INFO screen in a DTV source.
Page 14
11
Electronic Program Guide (EPG)
Press the GUIDE button on the remote control and the program information for the channel you
are watching will be displayed on the screen.
* The picture here shows an example of the GUIDE screen in a DTV source.
Channel Select
Press number key or ▼CH▲ button to select your desired channel.
1. ATV
The “-” button has no function in ATV mode. Directly press the number buttons to select
channels.
2. DTV
Use“-＂button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press“-＂→ press 3.
• Whether in ATV or DTV, after you input the channel numbers, press ENTER button to direct
to the channel immediately, or wait for 3 seconds to change automatically.
• Return to the previous channel, press LAST button.
List
Press LIST button and there will be a small window showing program list, you can scroll through
the list to select the channel you want directly without using the ▼CH▲ button.
Page 15
12
Favorite Channels
Press FAV button to show Favorite List and select your favorite channels that have already been
stored. (You need to preset the favorite channels from the OSD menu to enable this function.)
Sleep Time Setting
Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off
the LCD TV after a preset period of time passed. There are several times for choice – OFF, 15min,
30min, 60min, 90min, 120min, 180min, 240min.
Zoom
Press ZOOM button repeatedly to select the screen size. You can select from Full, 4:3, Movie
Scale, and Zoom In.
MTS Selecting
Press MTS button to choose the available sound output that is preset by TV broadcasting station.
C.C Mode
Press C.C button to select the caption mode.
Using the OSD function
You can use the OSD menus and options to adjust various settings by using the remote control.
The basic operation is as following:
Press MENU to display OSD menu.
Press ◄► to select your desired top Menu, and press ENTER or ▲▼ to enter the menu you
select.
Use ▲▼ to select the control you want to adjust.
When selecting the control with ►, press ► to enter next level menu or enable the function.
Press ◄► to adjust or select the settings.
Press MENU to exit from the OSD menu.
Page 16
13
ADVANCED OPERATION—OSD MENU
PICTURE Menu
—To adjust the picture quality
In TV, AV, S-Video, YPbPr, HDMI source:
Note: When in AV, S-Video, YPbPr or HDMI source, the TIME and TV Menu options are disabled.
In D-SUB source:
Auto Adjust: To auto adjust picture’s horizontal position, vertical position, fine tune and H-Size.
(only enabled in D-SUB source)
Aspect Ratio: To select image size from Full, 4:3, Movie Scale, or Zoom In.
Color Mode: To select color mode from Normal, Warm, or Cold.
Contrast: To adjust contrast of video. (right: Max, left: Min.)
Brightness: To adjust luminance of video. (right: Max, left: Min.)
Sharpness: To adjust picture sharpness. (right: sharper, left: softer.)
Page 17
14
Tint: To adjust tint level.
Color: To adjust color. (right: brilliant color, left: pale color.)
Advance: To adjust advanced D-SUB functions, press ► to enter. (only enabled in D-SUB
source)
Phase: To adjust delay time of phase in order to reduce the noise of picture.
Clock: To adjust clock frequency in order to get optimized horizontal size.
V-Position: To adjust the vertical position of the picture.
H-Position: To adjust the horizontal position of the picture.
SOUND Menu
—To set the audio quality and status
In DTV source:
Page 18
15
In ATV, AV, S-Video, YPbPr, HDMI, D-SUB source:
Bass: To adjust bass.
Treble: To adjust the treble.
Balance: To adjust left and right audio balance.
Audio Language: To select the available audio languages. (only enabled in DTV mode)
TIME Menu
—To set up time zone
It is only active in TV source.
Time Zone: To select the correct Time Zone for your area.
Daylight Saving Time: To select summer Daylight Saving Time.
Page 19
16
OPTION Menu
—To set up OSD window
In TV, AV, S-Video source:
In YPbPr, HDMI, D-SUB source:
OSD Language: To select an OSD language from English, French or Spanish.
OSD Timer: To setup the display time of OSD. (5, 10, 15, 25, 40, and 60 seconds)
Page 20
17
Closed Caption: To set close caption options.
CC Mode: To select Closed Caption Mode from Off, On, or CC on Mute.
Basic Selection: To set basic analog closed caption options. (CC1~CC4, TEXT1~TEXT4)
Advanced Selection: To select closed caption signal formats and set up caption modes
for digital TV channels. (Service1~6)
Option: Press ◄► to select Mode from Default or Custom. When “Custom” is selected,
use ▲▼ to select the desired controls, ◄► to adjust detailed settings.
Memory Recall: To restore the factory default settings.
Page 21
18
PARENT Menu
—To set up parental control
In TV, AV, S-Video, YPbPr, HDMI source:
Enter Password: Enter password and the screen below will show. (The default password is
0000.)
Change Password: To change the password, press ►, and the screen on the right appears.
Follow the instructions to change password.
System Lock: Select “On” to enable the following options.
Note: The below options can be enabled only when “On” is selected here.
Unrated Lock: Select “On” to block unrated movies or TV programs.
Page 22
19
US: Press ► to set TV or MPAA ratings.
TV: To adjust TV blocking level in the US. You can select between TV-Y, TV-Y7, TV-G,
TV-PG, TV-14, or TV-MA.
The TV Ratings in the US are defined as following.
TV-Y All children TV-PG Parental guidance suggested
TV-Y7 Directed to older children: this
program is designed for children
age 7 and above
TV-14 Parents strongly cautioned: this
program contains some material that
is unsuitable for children under 14
years of age
TV-G General audience TV-MA Mature audience only
MPAA: To adjust movie blocking level in the US. You can select between N/A, G, PG,
PG-13, R, NC-17, or X.
The movie Ratings in the US are defined as following.
N/A Not applicable R Restricted
G General audience NC-17 No one 17 and under limited
PG Parental guidance suggested X Adult audience only
PG-13 Parents strongly cautioned
Page 23
20
Canada: Press ► to set Canadian English and French ratings.
Canada Eng: To adjust blocking level in English-speaking region of Canada. You can
select between E, C, C8+, G, PG, 14+, 18+.
The Canadian English Ratings are defined as following.
E Exempt PG Parental guidance
C Children 14+ Viewers 14 years and older
C8+ Children eight years and older 18+ Adult programming
G General programming, suitable
for all audiences
Canada Fre: To adjust blocking level in French-speaking region of Canada. You can
select between E, G, 8 ans +, 13 ans +, 16 ans +, 18 ans +.
The Canadian French Ratings are defined as following.
E Exempt 13 ans + Not appropriate for children of less
than 13 years
G General 16 ans + Not appropriate for children of less
than 16 years
8 ans + Children eight years and older 18+ Reserved to adults
RRT Setting: To set Rating Region Table that defines the rating standard for a particular
geographic region and/or country. Press ► to enter the setting.
Page 24
21
Note: This picture is an example of the content of RRT Setting. However, the selections and
sub-selections of RRT Setting may be different in your OSD menu according to the local
broadcasting system.
Reset RRT: Press ► to reset RRT Setting.
TV Menu
—To set up for TV
It is only active in TV source.
TV/CATV: To select Cable or Air as the TV source.
Auto Scan: To auto scan the TV or DTV channels. Select Air or Cable in TV/CATV option, and
press ► to start auto scanning TV channels. Press MENU again at any time to interrupt
scanning.
Favorite Ch.: To set your favorite channels into memory. Press ENTER to confirm/ cancel your
favorite channels.
Page 25
22
Show/Hide Ch.: Press ENTER to skip the selected channel. To restore the channel, press
ENTER again.
Channel Name: Press ► to edit a name for the current channel. Use ▲▼ to choose letters or
signs, ◄► to move forward or backward, and then press MENU or ENTER to exit.
Page 26
23
TECHNICAL SPECIFICATION
Type 19.05” TFT Active Matrix
0.285 (H) x 0.285 (V) pixel pitch
Color Filter RGB vertical stripe
LCD
Glass surface Anti-Glare
RGB RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync,
fh: 30-82 kHz, fv:50-75 Hz
RF TV system Antenna / NTSC+ATSC
TV Cable system / CATV + Digital Cable
Input signal
Video 1 composite RCA, 1 S-Video, 1 YPbPr component,
1 HDMI
Audio 1 mini-stereo, 1 pair of RCA (L/R) stereo
Compatibility PC Up to 1440 x 900 Non-interlaced
Resolution Recommended
and supported
1440 x 900 @ 60 Hz
1360 x 768 @ 60 Hz
1280 x 1024 @ 60 Hz
1280 x 768 @ 60 Hz
1024 x 768 @ 60, 75 Hz
800 x 600 @ 60, 75 Hz
640 x 480 @ 60, 75 Hz
Speaker Output 2.5W x 2 @THD=10%
Audio Output 1 Headphone jack
Power Voltage 100-240 VAC, 50/60 Hz (auto switch)
Display area Full Scan 410.4mm (H) x 256.5mm (V)
16.2” (H) x 10.1” (V)
Temperature 32°F to + 104°F ( 0°C to + 40°C)
Humidity 20% to 65% (no condensation)
Operating
conditions
Altitude To 10,000 feet (3,000m)
Temperature -4°F to + 140°F (-20°C to + 60°C)
Humidity 10% to 90% (no condensation)
Storage condition
Altitude To 40,000 feet (12,000m)
Dimensions Physical 443.0mm (W) x 382.0mm (H) x 202.5mm (D)
17.4’’ (W) x 15.0’’ (H) x 8.0’’ (D)
Weight Net 4.93 kg (10.9 lb)
Regulations UL, FCC-B (Doc-B)
On < 55 W (blue LED) Power saving modes
Stand by < 3 W (orange LED)
Preset Timing Mode (Pre-adjusted to GTF® 1440 x 900 @ 60 Hz)
Warning: Do not set the graphics card in your computer to exceed these refresh rates;
doing so may result in permanent damage to the LCD TV
Note: Product Specifications are subject to change without notice.
Page 27
24
SAFETY PRECAUTIONS
This LCD TV is manufactured and tested to insure the user’s safety. Improper use or
installation may result danger to the LCD TV as well as to the user. Carefully go over the
following WARNINGS before installation and keep this guide handy.
WARNINGS
This LCD TV should be operated only at the correct power sources indicated on the label on
the rear end of the LCD TV. If you’re unsure of the power supply in your residence, consult
your local dealer or power company.
Do not try to repair the LCD TV yourself as it contains no user-serviceable parts. The LCD TV
should only be repaired by a qualified technician.
Do not remove the LCD TV cabinet. There is high-voltage parts inside that may cause electric
shock. even when the power cord is disconnected .
Stop using the LCD TV if the cabinet is damaged. Have it checked by a service technician.
Put your LCD TV only in a clean, dry environment. Unplug the LCD TV immediately if gets wet
and consult your service technician.
Always unplug the LCD TV before cleaning it. Clean the cabinet with a clean, dry cloth. Apply
non-ammonia based cleaner onto the cloth, not directly onto the glass screen.
Keep the LCD TV away from magnetic objects, motors, TV sets, and transformer.
Do not place heavy objects on the cable or power cord.
For PLUG CABLE EQUIPMENT, the Socket-outlet shall be installed near the equipment and
shall be easily accessible.
Page 28
25
CARE AND MAINTENANCE
Care
Avoid exposing your LCD TV directly to sunlight or other heat source.
Place your LCD TV away from the sun to reduce glare.
Put your LCD TV in a well ventilated area. Do not place anything heavy on top of your LCD TV.
Make certain your LCD TV is installed in a clean and moisture-free area.
Keep your LCD TV away from magnets, motors, transformers, speakers, and TV sets.
Safety Tips
If smoke, abnormal noise or odor came out of your LCD TV, remove the power cord
immediately and call your service center.
CAUTION-Never remove the rear cover of your LCD TV cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
Never try to repair your LCD TV yourself. Always call your service center or a qualified
technician to fix it.
TROUBLESHOOTING
No power
Make sure A/C power cord is securely connected.
Plug another electrical device into the power outlet to verify that the outlet is supplying proper
voltage.
Power on but no screen image
Make sure the video cable supplied with the TV is tightly secured to the video output port on
back of video source (DVD, VCR…). If not, tightly secure it.
Adjust brightness.
Make sure all signal cables are installed.
Wrong or abnormal colors
If any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
Connect the TV unit to another video source or use another TVs to make sure the video source
was not causing the problem.
Loading...