Utica Boilers CuB Series, JE, MGB Series II/MGC Series, PEG E Series, SVB Series II, SSC, SSV, UB90-100, UB90-200, UB95M-200, BC Series II, SFE IV Steam, SFH-W IV, SW Series II, TriFire TRB 3 Service & Technical Guide

RADIATION TABLES

The output of a radiator is measured in square feet of radiation. To determine the number of square feet of radiation in a radiator:

1.Measure the height of the radiator.

2.Count the number of columns in a section.

3.Count the number of sections.

Multiply the total number of sections by the number of square feet per section as shown in the following tables:

		2 COL						7 SECTIONS					Column Type Radiators
															SQ. FT. RADIATION PER SECTION
													Height	One	Two	Three	Four
													Inches	Column	Column	Column	Column	Window
													13	—	—	—	—	3
													16	—	—	—	—	33⁄4
				36”
													18	—	—	21⁄4	3	41⁄4
													20	11⁄2	2	—	—	5
													22	—	—	3	4	—
													23	12⁄3	21⁄3	—	—	—
													26	2	22⁄3	33⁄4	5	—
													32	21⁄2	31⁄3	41⁄2	61⁄2	—
													38	3	4	5	8	—
													45	—	5	6	10	—
		SIZE SHOWN 28 SQ. FT. RADIATION

5 TUBE					7 SECTIONS

Tube Type Radiators

					SQ. FT. RADIATION PER SECTION
			Height	Three	Four	Five	Six	Window
			Inches	Tube	Tube	Tube	Tube	Seven Tube
38”			14	—	—	—	—	21⁄2
			17	—	—	—	—	3
			20	13⁄4	21⁄4	22⁄3	3	32⁄3
			23	2	21⁄2	3	31⁄2	—
			26	21⁄3	23⁄4	31⁄2	4	43⁄4
			32	3	31⁄2	41⁄3	5	—
			38	31⁄2	41⁄4	5	6	—

SIZE SHOWN 35 SQ. FT. RADIATION

Wall Type Radiators

167⁄8

1311⁄16

Wall radiators are measured by their height, length and thickness. The following shows the number of square feet of heating surface per section:

SQ. FT. RADIATION PER WALL RADIATOR SECTION

Type of	Height	Length or	Thickness	Heating Sq. Ft.
Section	Inches	Width, In.	Inches	Radiation

SIZE SHOWN 5 SQ. FT. RADIATION

5-A	135⁄16	165⁄8	27⁄8	5
7-A	135⁄16	217⁄8	27⁄8	7
7-B	217⁄8	133⁄16	31⁄16	7
9-A	185⁄16	291⁄16	27⁄8	9
9-B	291⁄16	185⁄16	311⁄16	9