
Dear Customer,
Congratulations!
You are now the proud owner of Usha Fan Heater.
Innovatively designed, using only the highest quality material and components,
your Usha Fan Heater is designed for years of trouble free performance.
Please read this Instruction Manual carefully before using and keep it
cautiously after reading for future reference.
Best Wishes
2

IMPortant PrecautIons
1. Use Fan Heater only in upright position.
2. Keep away from inflammable liquids and gases.
3. Do not immerse in water when cleaning.
4. Keep the heater away from areas where it is possible for it to come in
contact with water. For example bathroom.
5. Do not cover the appliance, or use it to dry clothes.
6. Always position the heater well away from curtains, furniture and flammable
materials. Ensure all the times there is an unrestricted airflow around
the heater.
7. Do not tamper with the heater or attempt to open the casing. In all cases
of product failure or malfunction, the heater MUST NOT be used until it
has been checked at a service centre.
8. Always disconnect the plug from the wall socket when the heater is not
in use.
sPare Parts aVaIlaBIlIty
Should you require any spare parts for your Fan Heater, please call our Toll
Free no: 1800 1033 111 or any of our authorized service centres. Kindly take
care to mention your heater serial no. and model no. accurately.
3

Part naMe:
1. Thermostat knob
2. Pilot lamp
3. Power switch knob
4. Air outlet
5. Base
oPeratInG InstructIons
1. Plug into any 230VAC, 50Hz source.
4
Symbol
O OFF
Low 1200 WATTS
HI 2000 WATTS
LOW+Oscillation 1200 WATTS
HI +Oscillation 2000 WATTS
Function

saFety control
Your heater is fitted with a safety device “Double Protector” that (1) switches
off the heater by thermal cut-off in the event of overheating or malfunction. It
will reset while the temperature reduces to a normal level. (2) Shuts off the
heater by thermal fuse in the event of overheating or malfunction and not
operates above (3) by some other accidental reason.
If overheating or malfunctions continue, please contact authorised services
centre for examination.
The most common cause of overheating is deposits of dust or fluff entering
the heater. Ensure these deposits are removed regularly by unplugging the
unit and vacuum cleaning air vents and front grill.
MaIntenance
1. Always disconnect the cord from the electrical outlet when cleaning your
heater.
2. Light accumulated dust may be removed from the heater with a soft
cloth or vacuum cleaner. Interior dust can often be removed by using a
vacuum cleaner in its blower mode with a crevice tool attachment.
3. Wipe the exterior surfaces of the heater occasionally with a cloth
moistened (not dripping wet) with a solution of mild detergent and water.
Dry the case thoroughly with a soft dry cloth before operating the heater.
CAUTION: Do not allow water to run into the interior of the heater as this
could create fire or electric shock hazard.
4. The fan motor is factory lubricated for life, and will require no further
lubrication.
5. No other user maintenance is required or recommended. If service is
required, contact authorised service centre.
6. Store the heater in a clean dry place when not in use.
REMEMBER - Portable electric heaters are designed for spot heating, or as
a supplementary heat source. They are not intended to be main sources of
heat during the normal heating season.
5

Note: There may be trace of smoke or odour when unit is first operated. Do
not be alarmed. This indicates that a drop of oil had fallen on the heating
coil during the manufacturing process. It will quickly evaporate, and should
not re-occur.
6

Warranty card
This appliance is warranted for one year against all manufacturing defects
from the date of sale. In the event of any complaint, please contact your
dealer for the nearest Company Service Centre.
This Warranty is valid only when…
1. The appliance has not been opened or tampered with, by any
unauthorized person.
2. The warranty card and cash memo duly signed by the authorized
dealer are presented with the complaint
3. The appliance has been installed, used and maintained in
accordance with the instructional manual.
This Warranty does not apply for…
1. Damages due to chipping, peeling, plating and denting.
2. Breakage or damage to components made out of Bakellite. ABS,
SAN and such plastic, materials, rubber parts and cord.
3. Normal wear and tear of parts.
4. Damage resulting from accidents, mishandling or negligence on
part of the customer.
Liability for consequential loss or damage is neither accepted nor implied.
S.NO: _____________________________________________________
CASH MEMO _______________________ DATE: ____________________
DEALER’S NAME AND ADDRESS: _______________________________
___________________________________________________________
OWNER’S NAME & ADDRESS: _________________________________
___________________________________________________________
7