U.S. General 92699 Assembly And Operating Instructions Manual

FUEL INJECTION TEST KITFUEL INJECTION TEST KIT

FUEL INJECTION TEST KITFUEL INJECTION TEST KIT

FUEL INJECTION TEST KIT

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

Copyright © 2005 by Harbor Freight Tools®. All rights reser ved. No por tion of this
manual or any artwork contained herein may be reproduced in any shape or for m
without the express written consent of Harbor F reight T ools .

For technical questions and replacement parts, please call 1-800-444-3353

92699

®

SKU 92699 For technical questions, please call 1-800-444-3353 Page 2

Specifications

Item Description

Function Indicates if fuel pump is defective or

inconsistent in pressure flow

Pressure Gauge 2-9/16”; 0~100 PSI, 0.7 Bar; Fitting:

¼”x18 NPT swivel

Fuel Injection Types For most fuel injection systems except:

Bosch



, C.I.S. Jethronic, and throttle

body systems on G.M.



vehicles.

Weight 1 lb.

Save This Manual

You will need the manual for the saf ety w arnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. K eep
your inv oice with this man ual. Write the inv oice number on the inside of the front
cover. Keep the manual and inv oice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be fol­lowed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1. Keep work area c lean . Cluttered areas invite injuries.

2. Observe work area conditions. Do not use machines or po wer tools in
damp or wet locations. Don’t expose to rain. K eep work area well lighted.

3. Keep children awa y. Children must nev er be allo wed in the w ork area. Do
not let them handle machines, tools, or extension cords .

4. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Alw a ys loc k up tools and k eep out of reach of children.

5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this tool and
do not use this tool for a purpose for which it was not intended.

6. Dress properly. Do not wear loose clothing or jew elry as they can be caught
in moving parts. Protectiv e , electrically non-conductiv e clothes and non-skid
footwear are recommended when w orking. Wear restrictive hair co v ering to
contain long hair .

7. Use eye and ear protection. Always wear ANSI approved impact saf ety
goggles.

8. Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across running machines.

Note: Accuracy of the Gauge is ± 2%.

REV 05/05

SKU 92699 For technical questions, please call 1-800-444-3353 Page 3

9. Maintain tools with care. Keep tools sharp and clean for better and safer
performance. F ollow instructions f or lubricating and changing accessories.
Inspect tool cords periodically and, if damaged, have them repaired by an
authorized technician. The handles must be kept clean, dry, and free from oil
and grease at all times.

10. Remove adjusting keys and wrenches. Check that keys and adjusting
wrenches are removed from the tool or engine w ork surface before operating.

11. Stay alert. Watch what y ou are doing, use common sense. Do not operate
any tool when you are tired.

12. Check for damaged parts. Bef ore using an y tool, an y part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check f or alignment and binding
of moving parts; any broken parts or mounting fixtures; and an y other
condition that may aff ect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician.

13. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
availab le from Harbor F reight Tools.

14. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels if taking prescription medicine to determine if your judgment or
reflex es are impaired while taking drugs. If there is any doubt, do not operate
the tool.

15. Av oid w orking alone. If an accident happens, an assistant can bring help.

Additional Product Specific Safety Precautions

1. Do not use Fuel Injection Test Kit on diesel engines.

2. Loosen gas cap and relieve fuel pump pressure before testing.

3. Before testing fuel system, verify all connections are tight to eliminate
leaking.

4. Do not change fittings with engine running.

5. Gasoline is highly flammable. Do not smoke, or test near open flames or a
source of electrical sparks.

6. Do not allow gasoline to come in contact with the hot manifolds or other
engine components.

7. Do not drive the vehicle while under test.

8. If portable lighting is required, use only explosion proof drop-light.