U.S. General 64641 Owner's Manual & Safety Instructions
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 18h
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2018 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
To ol s re q u ir e d fo r as s e mb l y a n d s e r vi c e m a y n o t b e in c l ud e d .
Tool Cart and
Tools Not Included
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Specifications
Size Weight Capacity
16-7/8″ D x 18-1/4″ L 35 lb
Included Hardware
4 x M8x20 Bolts
4 x M8 Nuts
IMPORTANT SAFETY INFORMATION
Mounting Precautions
1. Mount only according to these instructions.
Improper mounting can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during mounting.
Use Precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
2. This product is not a toy.
Do not allow children to play with or near this item.
3. Do not exceed weight capacity.
4. Use as intended only.
3. Keep work area clean and well lit.
4. Keep bystanders out of the area during mounting.
5. Do not mount when tired or when under the
influence of alcohol, drugs or medication.
5. Inspect before every use;
do not use if parts are loose or damaged.
6. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Mounting Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
1. If mounting to Tool Cart (95272 / 61427 / 69397):
a. Remove the four Nuts and Bolts from
the corners opposite the Handle.
b. Line up the Mounting Plate (See Figure B.)
with the holes, then secure the
Tray with the Bolts and Nuts.
2. If mounting to a different cart, pilot holes may
need to be drilled into mounting surface:
a. Using the Mounting Plate as a template, mark
locations of Mounting Holes on mounting surface.
b. Using a drill bit appropriate for the Bolts,
drill pilot holes into the marked locations.
c. Position the Mounting Plate so that
Mounting Holes align with pilot holes.
d. Thread Bolts through Mounting Holes and
into pilot holes, then secure with Nuts.
Mounting
Holes
Mounting
Plate
Figure B
Figure A
Page 2 For technical questions, please call 1-888-866-5797. Item 64641
Loading...