U.S. General 45342 Assembly And Operating Instructions Manual

PNEUMAPNEUMA

PNEUMAPNEUMA

PNEUMA

TIC ROLLER SEATIC ROLLER SEA

TIC ROLLER SEATIC ROLLER SEA

TIC ROLLER SEA

TT

TT

T

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

Copyright © 2001 by Harbor Freight Tools®. All rights reser ved. No por tion of this
manual or any artwork contained herein may be reproduced in any shape or for m
without the express written consent of Harbor F reight T ools .

For technical questions and replacement parts, please call 1-800-444-3353.

45342

®

Revised Cover 12/04

SKU 45342 Page 2

Specifications

Save This Manual

You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep the manual and invoice in a safe and dry place for future
reference.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Keep children away. Children should not be allowed in the work area.

3. Use the right product for the job. There are certain applications for which
this product was designed. Do not modify this product and do not use this
product for a purpose for which it was not intended.

4. Use eye protection. Always wear ANSI approved impact safety goggles.

5. Maintain product with care. Inspect parts periodically and, if damaged,
have them repaired by an authorized technician.

6. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.

ITEM
Overall Dimensions
Tool Tray
Lifing Pole
Ram Extension
Handle
Hub
Supporting Plate
Casters
Seat
Material
Net Weight
Weight Capacity

DESCRIPTION
19-1/2”H x 15” Dia.
15” Dia. x 7/8”D x 9/100” Thick
1-31/32” Dia. x 7” to 11-5/8”H
4-1/2”
5-1/4”L x 1-1/4”W x 5/8”Thick
1-47/64” Dia. x 1-1/4”H
7-5/8” Dia.
2-27/64” Dia. x 53/64”W
11-1/2” Dia. x 1-5/8” Thick
Stamped Steel, Red Vinyl, Foam Rubber

12.35 Lbs.
300 Lbs.