Universal Remote Control (URS) CAM-DC-O User Manual

Owner’s Manual

CAM-DC-O

Vandal/Weatherproof Network Camera

CAM-DC-O Vandal and Weatherproof Network Camera Owners Manual ©2013­2014 Universal Remote Control, Inc.

The information in this manual is copyright protected. No part of this manual may be
copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.

Universal Remote Control, INC. shall not be liable for operational, technical or
editorial errors/omissions made in this manual.

The information in this manual may be subject to change without priornotice.

Total Control is a registered trademark of Universal Remote Control, Inc.

URC is a registered trademark of Universal Remote Control, Inc.

All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: [phone] Fax: [phone]

TABLE OF CONTENTS

Introduction 1

Features and Benefits 1

Parts Guide 1

CAM-DC-O Description 2

Basic Installation 4

Communicating with the Camera 5

Navigating the Web Interface - Live View 6

Navigating the Web Interface - Admin 7

Specifications 8

Limited Warranty Statement 9

End User Agreement 12

Regulatory Information to the user 13

Declaration of Conformity 14

CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA

Introduction

Congratulations on your purchase of the CAM-DC-O Vandal
and Weatherproof Surveillance Dome IP Camera! The
CAM-DC-O is an outdoor IP camera that allows for seamless
viewing over the network with Total Control interfaces such as
the TRC-1280, TKP-2000, TKP-7000 and future Total Control
graphical interfaces. Once networked, it relays video to these
devices or your PC.

Features and Benefits

• Viewable on Total Control’s TRC-1280, TKP-2000, TKP­7000 and Complete Control™ KP4000 / 4000C

• Viewable on PCs, iPad®, iPhone® and iPod touch®

• Uses a progressive scan CMOS sensor, H.264/MJPEG
dual encoding and transmission with simultaneous dual
streaming capabilities.

• Camera uses a PoE power supply such as the MFSPOE-8.

• The camera has a minimum Lux rating of 4.0 for color.

Parts Guide

The CAM-DC-O Vandal and Weatherproof Network Camera
includes:

1 - CAM-DC-O Outdoor Mini Dome Camera
1 - Attach Guide
1 - Bracket Screws
1 - Allen Wrench
1 - Quick Installation Manual

Page 1

CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA

CAM-DC-O Description

Front View

Dome
Cover

LAN connection

Dome Cover: Use the supplied allen wrench to open the
dome cover. Once it is opened, you can adjust the position of
the lens. Use a screwdriver to loosen the lens case and move
the camera lens to the desired position.

Note: If you need to focus the lens, use a Philips screwdriver to
loosen the screw and turn the lens until the image is clear.

LAN: Plug an Ethernet cable from the camera’s LAN connection
to a PoE router or switch like URC's MFS-POE8. (If a PoE
switch is not used, you must use a PoE injector to supply
power to the camera.)

Page 2

CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA

CAM-DC-O Description

Inside View

Reset

Reset: Pressing the “F.D” button will return the unit back to
factory default settings, including the Admin ID and

password.

Page 3