Universal Remote Control (URS) CAM-DC-I User Manual

Owner’s Manual

CAM-DC-I

Indoor Network Camera

CAM-DC-I Indoor IP Camera Owners Manual ©2014 Universal Remote Control, Inc.

The information in this Owner’s Manual is copyright protected. No part of this
manual may be copied or reproduced in any form without prior written consent from
Universal Remote Control, Inc.

Universal Remote Control, INC. shall not be liable for operational, technical or
editorial errors/omissions made in this manual.

The information in this Owner’s Manual may be subject to change without prior
notice.

Total Control is a registered trademark of Universal Remote Control, Inc.

URC - Control the Experience is a registered trademark of Universal Remote Control,
Inc.

All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: [phone] Fax: [phone]

TABLE OF CONTENTS

Introduction 1

Features and Benefits 1

Parts Guide 1

CAM-DC-I Description 2

Basic Installation 3

Communicating with the Camera 4

Navigating the Web Interface - Live View 5

Navigating the Web Interface - Admin 6

Specifications 7

Limited Warranty Statement 8

End User Agreement 11

Federal Communication Commission

Interference Statement 12

Regulatory Information to the user 13

Declaration of Conformity 14

CAM-DC-I INDOOR NETWORK CAMERA

Introduction

Congratulations on your purchase of the CAM-DC-I Indoor
Surveillance Dome IP Camera! The CAM-DC-I is an indoor IP
camera that allows for seamless viewing over the network with
Total Control interfaces such as the TRC-1280, TKP-2000,
TKP-7000 and future Total Control graphical interfaces. Once
networked, it relays video to these devices or your PC.

Features and Benefits

• Viewable on Total Control’s TRC-1280, TKP-2000, TKP­7000 and Complete Control™ KP4000 / 4000C

• Viewable on PCs, iPad®, iPhone® and iPod touch®

• Uses a progressive scan CMOS sensor, H.264/MJPEG
dual encoding and transmission with simultaneous dual
streaming capabilities.

• Camera uses a PoE power supply such as the MFSPOE-8.

• The camera has a minimum Lux rating of 4.0 for color.

Parts Guide

The CAM-DC-I Indoor Dome Network Camera includes:

1 - CAM-DC-I Indoor Mini Dome Camera
1 - Bracket Screws
1 - Quick Installation Manual

Page 1

CAM-DC-I INDOOR NETWORK CAMERA

CAM-DC-I Description

Front View

Dome
Cover

OPEN

LAN

CLOSE

Dome Cover: Mini dome cover twists to open and close.
Open the dome cover to reveal the lens and position it to the
correct viewing angle.

connection

Note: If you need to focus the lens, turn it until the image is clear.

LAN: Plug an Ethernet cable from the camera’s LAN connection
to a PoE router or switch like URC's MFS-POE8. (If a PoE switch
is not used, you must use a PoE injector to supply power to the
camera.)

Page 2

CAM-DC-I INDOOR NETWORK CAMERA

Basic Installation

Follow these basic steps to install the Indoor Network Camera
CAM-DC-I.

1. Fasten the camera to your planned location.

2. Plug an ethernet cable to the LAN port of the camera.

Note: No separate power supply is needed as the camera
receives power via a PoE supply or a MFSPOE-8 router.

Page 3