Universal Remote Control, Inc.
www.universalremote.com
OCE-0002B Rev 02(07/18/02)
Operating Instructions
For 4 Function
Cable TV Remote Control
The remote control is designed to operate
the Cable set top boxes and the majority
of TV, VCR/DVD and AUDIO equipment on
the market.
Introduction
1
Default State :
Device Default:
Scientific Atlanta Explorer
and 8600X
Cable boxes.
Volume Default: TV volume and mute
through the TV, with the option of
controlling volume and mute through the
Cable box or Audio. Refer to Section Ffor
programming the volume and mute
through your Cable box or Audio.
System On/Off button:
This button is designed to send out
power commands for two, three or all
four devices with one button press.
Please refer to section E for details.
Operations
4
Replacing Batteries
2
Before you program or operate the
remote control, you must install two
new AA alkaline batteries.
STEP1
Remove the battery compartment cover
on the back of your remote control.
STEP2
Check battery polarity carefully,
and install the batteries as shown
in the illustration below.
STEP3
Replace the battery compartment cover.
Button Functions
3
Programming the Remote Control
5
A. Programming For Your Devices.
The remote control can be programmed by pressing in a three digit code number
that corresponds to particular manufacturers and brands of Audio/Video
equipment. The three-digit code numbers are listed in the code table of the
instruction manual.
STEP1 Turn on the equipment you wish to program. (TV, VCR, DVD or AUDIO).
STEP2 Press the [DEVICE] button (TV , VCR or AUD) to be programmed and the
[SELECT] button simultaneously for 3 seconds. The device LED will turn
on indicating the unit is ready to be programmed.
*Tip : The device LED will light on for 20 seconds. The next step must be entered
while the LED is on.
STEP3 Point the remote control toward the equipment and enter the three-digit
code number assigned to your brand from the code tables.
*Tip : The equipment will turn off when
the correct three-digit code
number has been entered. You
can verify you have selected the
correct code by pressing the
[MUTE] button, the equipment
should turn on or turn off.
*Note : If there is more than one
three-digit number listed for your
brand, try one code number at a time
until your equipment turns off.
STEP4 Store the three-digit code
number by pressing the same
[DEVICE] button once again.
The device LED will blink
twice to confirm that the
code has been stored.
*Note : Try all the functions on the
remote control. If any of the functions
do not work as they should, repeat from
Step 2 using the next three-digit code
number from the same brand list. Make
sure that the VCR/VOD button is in the
VCR position when using your VCR.
B. Auto Search Method.
If the three-digit code numbers assigned
to your brand do not turn off your
equipment or the code tables do not list
your brand, you can use the Auto Search
Method to find the correct three-digit
code number for your equipment by the
following steps:
STEP1 Turn on the equipment you
wish to operate.
STEP2 Press the [DEVICE] button (TV,
VCR or AUD) to be programmed
and the [SELECT] button
simultaneously for 3 seconds.
The device LED will turn on.
*Tip : The device LED will light on for
20 seconds. The next step must
be entered while the LED is on.
STEP3 Press the [CH+] or [CH-] button
one step at a time or keep it
pressed. The remote will emit
a series of Power ON/OFF
commands. Release the [CH+]
or [CH-] button as soon as t he
equipment turns off.
STEP4 Press the same [DEVICE]
button to store the code. The
Device LED will blink twice to
confirm that the code has
been stored.
C. To Find the Three Digit
Code Number That was
Stored in the Device.
STEP1 Press the [DEVICE] button (TV,
VCR or AUD) you wish to
verify and the [SELECT] button
simultaneously for 3 second.
The device LED will turn on.
*Tip : The device LED will light on for
20 seconds. The next step must
be entered while the LED is on.
STEP2 Press the [INFO] button.
The device LED will blink number of
times indicating the number of each
digit of the code number. Each digit is
separated by a 1 second pause of the
LED being turned off.
Example : One blink, three blinks and
eight blinks with an interval of 1
second of LED being turned off,
indicates the code number 138.
Note :Ten blinks is equal to the number 0.
D. Programming a second TV
to VCR Mode.
STEP1 Press the [VCR] button to be
programmed and the [SELECT]
button simultaneously for 3
seconds. The [VCR] device
LED will turn on.
*Tip : The device LED will light on for
20 seconds. The next step must
be entered while the LED is on.
STEP2 Press the [TV] button to
access the TV code table.
STEP3 Point the remote control
toward the equipment and
enter the three-digit code
number assigned to your TV
brand from the code tables.
*Tip : You can verify that you selected
the correct code by pressing the
[MUTE] button. The equipment
should either turn on or turn off.
STEP4 Store the three-digit code
number by pressing the [VCR]
button once again. The [VCR]
device LED will blink twice to
confirm that the code has
been stored.
E. Programming the
System On/Off Button.
This button is pre-programmed to turn on
all devices with one button press, however
you can also program to turn on one or
two devices by following these steps:
STEP1 Press the [CBL] button.
STEP2 Press the [SYSTEM ON/OFF]
button and the [SELECT] button
simultaneously for 3 seconds.
The [CBL] device LED will turn
on for 20 seconds.
STEP3 Press the [DEVICE] button
you wish to store in the
[SYSTEM ON/OFF] button and
repeat this until you stored all
the power commands into
the [SYSTEM ON/OFF] button.
STEP4
Press the [CH+] button to save
the power commands you
stored. The [CBL] device LED will
blink twice to confirm the saving.
F.
Program the
Volume Controls.
By following the steps below, you
can program the volume controls
(Volume UP, Volume Down and
MUTE) to your TV, VCR and Audio.
The default volume control settings on
the remote control is TV volume
control. If you wish you can control
the volume via your cable box or audio
equipment. Use the following steps to
change the volume control settings:
STEP1 Press the [CBL] button and the
[SELECT] button simultaneously
for 3 seconds. The [CBL]
device LED will turn on.
*Tip : The device LED will light on for
20 seconds. The next step must
be entered while the LED is on.
STEP2 Press the [ VOL + ] button.
STEP3
Press the [ CBL ], [ AUD ]
(whichever applicable) button.
The [CBL] device LED will
blink twice to confirm the
programming.
To return to original state:
If you wish to restore the TV volume
control in CABLE mode, repeat the
above steps by pressing [ TV ] button
in STEP3 .
G. Programming For
Advanced Function.
In the CABLE mode, the [*] button
can be programmed to act as a
macro or favorite channel button to
send out up to 10 commands with
one button press.
STEP1 Press the [CBL] button to
select the CABLE mode.
STEP2
Press the [*] button and
[SELECT] button simultaneously
for 3 seconds. The [CBL] device
LED will turn on for 20 seconds.
UR4-P360SI
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
CETRONIC 043
CITIZEN 070 002 003 004 101 103 143
CLASSIC 043
CONCERTO 004
CONTEC 043 051 207 230
CORONADO 143
CRAIG 043 054 028 239
CROWN 043 143
CURTIS MATHES 070 004 101 143 236
CXC 043
DAEWOO 076 103 055 004 127 143 016 043
044 125 120 214 215 229 235 249
DAYTRON 004 143
DWIN 161
DYNASTY 043
DYNATECH 062 209 238
ELECTROHOME 024 076 143
EMERSON 005 028 043 048 076 096 155 004
051 143 151 153 154 216 217 230
231 236 238 247 252
ENVISION 070
FISHER 007 057
FUJITSU 164 197
FUNAI 028 043 238
FUTURETECH 043
GE 070 073 130 144 160 161 004 008
009 034 056 074 091 155 223 224
232 233 236 239 245
GO VIDEO 239
GOLDSTAR / LG 004 106 119 110 112 113 127 143
247 250
HALL MARK 004
HARMAN KARDON
211
HITACHI 163 004 007 009 011 072 010 012
023 075 143 158 208 236 238
HQ 238
INFINITY 164
INKEL 129
INSTANTREPLAY 236
JBL 164 209
JCL 236
JCPENNEY 004 008 024 030 065 070 101 143
156 160 221 234 236 239 247
JENSEN 013
JVC 038 001 034 083 195 236 242
KENWOOD 070 001 238
KLOSS 002 059
KMC 219
KTV 070 043 143 154
LLOYD 238
LODGENET 072
LOEWE 196
TV
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
ADMIRAL 072 081 160 161
AIWA 238
AKAI 070 146 004
AMARK 112 143
AMERICAN HIGH 236
AMPRO 073 167 245
ANAM 043 054 055 056 080 112 131 236
AOC 058 070 004 112 222
AUDIOVOX 076 103
BROKSONIC 231 252
CANDLE 070 002 003 004
CANON 236
CAPEHART 058
TV
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
LOGIK 072
LUXMAN 004
LXI 007 015 052 081 160 164 238
MAGNIN 239
MAGNAVOX 070 003 004 022 059 060 061 063
064 127 164 094 160 056 236 238
243 253
MARANTZ 164 070 236 243
MARTA 247
MATSUI 164
MEI 236
MEMOREX 004 007 072 234 236 238 245 247
METZ 088
MGA 024 070 004 042 239
MINERVA 088
MITSUBISHI 109 024 042 004 040 146 028 124
226 232 255
MTC 070 004 062 101 209 229 238 239
MULTITECH 238
NAD 015 025
NEC 070 130 134 040 056 007 019 024
004 213
NIKEI 043
ONKING 043
ONWA 043
OPTONICA 019 081
ORION 096 201 202 203 204 205 231 252
PANASONIC 034 056 080 164 206 234 236 244
PENTAX 236
PHILCO 070 003 004 024 056 059 060 063
064 127 143 164 236 238 243
PHILIPS 164 005 038 093 127 070 003 004
059 236 238 243 247
PILOT 247
PIONEER 023 025 135 176 004 018 070
PORTLAND 004 143
PROSCAN 144 160 161 167
PROTON 004 058 143 171 173 193 131
QUASAR 034 056 234 236 244
RADIO SHACK 004 019 127 143 043 250
RCA 160 161 144 156 065 070 004 023
024 056 074 152 221 232 233 236
238 239
REALISTIC 007 019 236 238 239 247
RICO 241
RUNCO 072 169 073 130 179 180 181
SAMPO 070 004 058 218 220
SAMSUNG 004 101 127 133 143 160 089 105
070 237 239 248
SANSUI 238 252
SANYO 007 053 057 082 020 212 239
SCOTT 004 005 028 043 048 143
TV
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
BROKSONIC 035 037 044 129 152 153 231
CANON 028 031
CAPEHART 108
CRAIG 003 040 135
CURTIS MATHES 031 041 156
DAEWOO 117 119 005 116 007 010 065 108
110 112
DAYTRON 108
DIMENSIA 156
DBX 012 023 039 043
DYNATECH 034 053
ELECTROHOME 059
EMERSON 006 029 035 025 027 034 036 037
046 101 129 131 138 017 031 044
152 153 157 231
FISHER 003 008 009 010
FUNAI 034
GE 031 072 144 147 063 151 107 109
156 126 232 233 040
GO VIDEO 040 132 136
GOLDSTAR / LG 101 123 012 013 114
HARMAN KARDON
012 045
HITACHI 013 026 034 063 137 150 156 031
HUGHES 013
HQ 034
INSTANTREPLAY 031
JCL 031
JCPENNEY 012 013 040 101 156 066 031 234
JENSEN 043
JVC 048 050 043 130 060 012 031 150
055 158
KENWOOD 014 034 047 048 023
LLOYD 034
LXI 034 003 009 017
MAGNIN 040
MAGNAVOX 067 031 034 041 068 154 160
MARANTZ 067 069 031 067 012 023
MARTA 101
MATSUI 027 030
MEI 031
MEMOREX 102 101 003 010 014 031 034 053
072 139 134 234
MGA 045 046 059 040
MINOLTA 013 156
MITSUBISHI 059 061 046 051 142 013 045 162 232
MTC 034 040
MULTITECH 024 034
NEC 012 023 043 048 039
NORDMENDE 043
OPTONICA 053 054
ORION 153 231
PANASONIC 070 133 031 066 160 161 234
VCR
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
ALPINE 179
APEX DIGITAL 196 197
ARCAM 165
CYBERHOME 170
DAEWOO 170
DENON 184 226
GE 188 189
GOLDSTAR / LG 182 194
HARMAN KARDON
217
HITACHI 181
JVC 185
KENWOOD 166
MAGNAVOX 178 191 195
MARANTZ 176 177
MCINTOSH 167
MITSUBISHI 186
NAD 198
ONKYO 207
PANASONIC 173 192
PHILIPS 164 176 177 191 195
PIONEER 175 180 187
PROCEED 172
PROSCAN 188 189
RCA 188 189
SAMSUNG 183 193
SHARP 174
SONY 168 190
TOSHIBA 169 171 191 206
YAMAHA 192 199
ZENITH 182 194
DVD(VCR)
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
TV
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
AIWA 034
AKAI 016 043 046 124 125 142 146
AMERICAN HIGH 031
AMPRO 072
ANAM 031
AUDIO DYNAMICS
012 023 039 043
VCR
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
PENTAX 013 031 063 156
PHILCO 031 034 067
PHILIPS 031 067 034 101 054 071
PILOT 101
PIONEER 021 013 048
PORTLAND 108
QUARTZ 002 014
QUASAR 070 133 161 031 066 160 234
RADIO SHACK 123
RCA 107 109 144 147 151 013 041 034
040 156 031 140 232 233
REALISTIC 003 008 010 014 031 034 040 053
054 101
RICO 058 078
SALORA 014
SAMSUNG 102 040 032 104 107 109 112 113
115 120 122 125 159
SANSUI 043 048 135 022 034 153
SANYO 003 010 102 007 014 134 040
SCOTT 017 037 044 129 131 112 159
SEARS 003 008 009 010 013 014 017 081
101 034
SHARP 031 054 053 143
SHINTOM 024
SIGNATURE 034
SONY 001 057 058 003 052 149 031 155
SOUNDESIGN 034
STS 013
SYLVANIA 031 059 034 067
SYMPHONIC 034
TANDY 010 034
TATUNG 039 043 023
TEAC 034 039 043 023
TECHNICS 031 070
TEKNIKA 031 019 034 101
TMK 006
TOSHIBA 112 008 131 047 059 082 013 042
TOTEVISION 040 101
UNITECH 040
VECTOR RESEARCH
012
VIDEO CONCEPTS 012 046 034 141
VIDEOSONIC 040
WARDS 003 013 024 031 034 040 053 054
017 131
YAMAHA 012 043 034 039
ZENITH 072 080 001 048 034 101 058
VCR
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
HAITAl 119
HITACHl 088
JCPENNEY 109 154 178
JENSEN 099
JERROLD 141
JVC 112 198 252
KENWOOD 096 104 119 125 148 151 163
171 173 242
KRELL 223
LEXICON 215 250
LUXMAN 066 120 205 229
LXI 123 177
MAGNAVOX 126 162 185 186 224 228
MARANTZ 074 105 126 128 139 155 162
186 232
MCINTOSH 251
MONDIAL 069 225
MCS 178
MITSUBISHI 253
MERIDIAN 013 067
NAD 128
NAKAMICHI 072 212 234 235
NILES 236
ONKYO 094 115 116 209 211 255
OPTIMUS 121 125 140 181
PANASONIC 131 144 187 200
PARASOUND 085 086 090
PHILIPS 136 186 126 197
PIONEER 093 132 138 210 165 189 195
201 081 230
QUASAR 131 187
RCA 109 213 166
REALISTIC 103 122 123 124 172 174 177
179 180 194
ROTEL 204 218 239
SANSUI 196 214 126 139 075 197
SANYO 157 129
SAMSUNG 068
SCOTT 180 190
SHARP 096 125 151 161 169 182 193
SHERWOOD 089 127
SONY 097 117 001 183 200 253 237
238 188 192
SOUNDSTREAM 197
STARCOM 141
SYMPHONIC 124
TEAC 102 159 180 062
TECHNICS 131 184 187 200 202 208 165
TOSHIBA 175
WARDS 163
YAMAHA 092 120 166 240 125 169 216
ZENITH 222 061
AUD
STEP3 Press up to 10 buttons you
wish to store. The [CBL]
button LED will blink once
for each command entered.
STEP4 Press the [CH+] button to
store the functions that are
selected. The [CBL] device
LED will blink twice to confirm
the storage of functions.
H. Low Battery Warning.
When the battery is low (2.0V-2.3V)
and needs to be replaced with fresh
batteries, device LED will blink 2 times
in sequence whenever a [DEVICE]
button is pressed to turn on equipment.
I. Memory Lock System.
This remote control is designed to
retain programmed memory for 10
years even after batteries are
removed from the remote control.
J.
Write your device Set-up codes.
TV Set-up Code Number :
VCR Set-up Code Number :
AUDIO Set-up Code Number :
Set-up Code Tables
6
SEARS 004 007 015 028 030 057 082 094
143 160 238 247
SELECO 189
SHARP 081 014 019 028 004 022 081 143
175 029 236 251
SIGNATURE 072 238
SONY 001 085 126 139 236 240 241 254
SOUNDESIGN 003 004 028 043 238
SPECTRICON 112
SSS 004 043
SUPRE MACY 002
SYLVANIA 070 003 059 060 063 064 127 160
164 044 056 210 236 238 243
SYMPHONICS 052 238
TANDY 081 238
TATUNG 056 062 209
TEAC 238
TECHNICS 034 080 236 244
TECHWOOD 004
TEKNIKA 002 003 004 024 028 043 072 101
143 103 227 236 238 247
TELERENT 072
TERA 172
TMK 004
TOSHIBA 015 030 007 040 062 101
TOTEVISION 143 239 247
UNITECH 239
UNIVERSAL 008 009
VIDEO CONCEPTS 146 238
VIDEOSONIC 239
VIDIKRON 174 188
VIDTECH 004
WESTING HOUSE 076
WARDS 004 064 164 008 009 019 028 060
061 063 072 074 143 070 224 225
236 238 239
YAMAHA 004 070 238
YORK 004
YUPITERU 043
ZENITH 011 072 073 095 103 238 241 245
246 247
ZONDA 112
*Note : For TV/VCR combination unit,
Please set up TV code number in the
TV mode to operate the volume, Set
up VCR code number in the VCR
mode to operate the VCR functions.
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
ADCOM 146 149 227 244
AMC 083 084
ARCAM 100
AUDIO FILE 093 098
AUDIO TECHINICA 221
AIWA 111 114 117 156 170 199 203 219 231
241 254
AKAl 181 233
ANAM 180
BOSE 064 137 219
B & K 150 152
CARVER 013 098 107 126 129 160 163 220 245 249
CLARION 151 169
DENON 101 133 191 202 208 246 247
Enlightened Audio
078 153
FISHER 107 129 157 163 176
Fosgate Audionics 228 248
GE 216 123
HARMAN KARDON
073 195 248 249
AUD
Loading...