Universal Remote Control UR3-SR3, OCE-0009D User Manual

Download

Universal Remote Control, Inc.

www.universalremote.com

UR3-SR3

Operating Manual

For Easy Clicker

This remote control is designed to operate most Digital and Analog Cable Boxes, as well as TVs, and a VCR or DVD player.

Introduction

Install two

AAA alkaline batteries

as shown here

Before you program or operate the remote control, you must install two new AAA alkaline batteries.

STEP1 Remove the battery compartment cover from the

back of your remote control.

STEP2 Check battery polarity carefully, and install the

batteries as shown in the illustration below.

STEP3 Replace the battery compartment cover.

Replacing Batteries

STEP1 Turn on the equipment that you want the remote

control to operate Cable Box, TV and DVD(VCR).

STEP2 Press the [DEVICE] button and the [OK/SEL]

button simultaneously for three seconds. The corresponding device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds. The next step must be entered while the LED is on.

STEP3 Point the remote control toward the equipment

and enter the three-digit code number assigned to your brand from the code tables. If there are more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.

*Note : You can verify that you have selected the correct

code by pressing the [MUTE] button. The equipment should turn on or off.

STEP4 Store the three-digit code by pressing the same

[DEVICE] button once again. The device LED will blink twice to confirm that the code has been stored.

*Note : Try all the functions on the remote control. If any

of the functions do not operate as they should, repeat the instructions from Step 2 using the next three-digit code number from the same brand list.

B. Auto Sear

ch Method

If none of the three digit code numbers assigned to your brand of equipment works, or the code table does not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by following steps:

STEP1 Turn on the equipment that you want the remote

control to operate (Cable Box, TV, VCR, or DVD).

Button Functions

Programming the Remote Control.

A. Manual Pr

ogramming

The remote control can be programmed by entering a threedigit code number that corresponds to particular brands and models of equipment. The three-digit code numbers are listed in the code tables sections of this instruction manual.

*Note : In this section, when you are instructed to press a

[DEVICE] button, that means you should press either the CBL, TV, or DVD button, depending on which device you are programming the remote to operate.

simultaneously for 3 seconds. The DVD LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP2 Press the [TV] button.

STEP3 Point the remote control toward the TV and enter the

three-digit code for your TV from the TV codes table.

STEP4 Store the three-digit code by pressing the [DVD]

button. The device LED will blink twice to confirm that the code has been stored.

E. Pr

ogramming for Advanced Functions.

In the CABLE device mode, the A,B,C,D and blank macro buttons can be programmed to act as a 'Macro' or Favorite Channel button. This allows you to program up to five 2-digit channels, four 3-digit channels or three 4-digit channels that can be accessed with on button press.

*Note : The A,B,C and D buttons are not programmable

if you have a Digital Cable Box made by Pace, Pioneer or Scientific-Atlanta.

STEP1 Press the [CBL] button to select the CBL mode.

STEP2 Press the [MACRO] button and [OK/SEL] button

simultaneously for 3 seconds. The [CBL] button will turn on for 20 seconds.

STEP3 Enter the the 2, 3 or 4-digit code for the channel you

want programmed first (for example, 007) using the Number Pad, then press the [STOP] button. Then enter the code for the next channel (for example,

050), then press the [STOP] button. Repeat this process for the third channel. The [CBL] button will blink once for each channel entered.

STEP4 Press the [CH+] button to store the channels that

were selected. The [CBL] button will blink twice to confirm the storage of commands.

STEP2 Press the [DEVICE] button and the [OK/SEL]

button simultaneously for three seconds. The device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds. The next step must be entered while the LED is on.

STEP3

Press the [CH+] or [CH-] button one at a time or keep it pressed. The remote will emit a series of Power ON/OFF code signals. Release the [CH+] or [CH-] button as soon as the equipment turns off.

*Note : You can verify that you selected the correct code

by pressing the [MUTE] button. The equipment should turn On or Off.

STEP4 Press the same [DEVICE] button to store the

code. The Device LED will blink twice to confirm that the code has been stored.

C. TT

o find the Thr

ee-Digit Code that W

ee-Digit Code that Wasas

PrProgrammed using the Auto Sear

ogrammed using the Auto Searchch

Method

STEP1 Press the appropriate [DEVICE] button and the

[OK/SEL] button simultaneously for three seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP2 Press the [INFO] button. The device LED will blink

a number of times indicating the number of each digit for the code. Each digit is separated by a one second interval of the LED being off.

Example : One blink, then three blinks, then eight blinks

indicates the code number 138.

*Note : Ten blinks indicates the number 0.

D. PrPr

ogramming a Second TV to the DVD Button

STEP1 Press the [DVD] button and the [OK/SEL] button

Assigning the Channel keys to a

Dif

fer

ent Device

By default, the CH+, CH-, NUMERIC and LAST keys operate through your Cable Box. If you would like those keys to operate those functions on a different device, follow these steps.

STEP1 Press the [OK/SEL] button and [CBL] button

simultaneously for three seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP2 Press the [VOL -] button. The device LED will

blink.

STEP3 Press the [TV] button. The device LED will blink

twice to confirm the programming.

*Note : If you wish to have the channel keys operate your

Cable Box, press the [CBL] button instead of the [TV] button in Step 3.

H.H.Assigning the VCR/DV

Assigning the VCR/DVDD

–

VOD keys to

contr

ol your VCR or DVD

By default, the REW, Play, FF, Record, Stop and Pause keys operate VOD (Video On Demand) through your Cable Box. If you would like those keys to operate those functions on your DVD or VCR, press the PLAY button for 3 seconds until the DVD/VCR button lights. To return to your Cable Box control, press the PLAY key again for 3 seconds until the CBL button lights.

Low Batter

y W

y Warar

ning

When the battery is low (2.3V-2.0V) and needs to be replaced with fresh batteries, device LED will blink 2 times in sequence whenever a [DEVICE] button is pressed to turn on equipment.

Memor

y Lock System.

This remote control is designed to retain programmed memory for 10 years — even after batteries are removed from the remote control.

To access the programmed channels, press the [MACRO] button once. This will bring up the first channel. Press once again and it will bring up the second channel. Press again and it will bring up the third channel.

To erase the Macro programming and return to the original function:

STEP1 Press the [CBL] button to select the CABLE mode.

STEP2 Press a [MACRO] button and the [OK/SEL] button

simultaneously for 3 seconds. The CBL device LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP3 Press the [CH+] button to erase the functions stored

in the button. The CBL device LED will blink twice to confirm that the memory button has been erased.

FF.

Assigning the V

olume and Mute keys to a

Dif

fer

ent Device

By default, the VOL+, VOL- and MUTE keys operate through your TV. If you would like those keys to operate those functions on a different device, follow these steps.

STEP1 Press the [OK/SEL] button and [CBL] button

simultaneously for three seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP2 Press the [VOL +] button. The device LED will

blink.

STEP3 Press the [DEVICE] button corresponding to the

device that you would like the volume and mute buttons to control. The device LED will blink twice to confirm the programming.

Example : If you wish to have the volume and mute keys

operate your Cable Box, press the [CBL] button in Step3.

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

ADMIRAL 072 081 160 161 096 ADVENT 147 AIWA 141 145 AKAI 070 146 004 148 124 226 104 108 AKIO 103 ALARON 028 AMARK 112 127 AMERICA ACTION 043 AMPRO 073 167 ANAM 043 054 056 080 112 131 AOC 058 070 004 112 APEX DIGITAL 015 150 037 AUDIOVOX 076 103 043 035 078 224 AVION 223 BAYSONIC 043 BELL&HOWELL 072 BRADFORD 043 BROKSONIC 096 170 CAIRN 162 CANDLE 070 002 003 004 CAPEHART 058 CARVER 164 CELEBRITY 001 CETRONIC 043 CINERAL 103 120 CITIZEN 070 002 003 004 101 103 127 CLASSIC 043 CONCERTO 004 CONTEC 043 051 CORONADO 127 CRAIG 043 054 028 CROSLEY 164 CROWN 043 127 CURTIS MATHES 070 004 101 011 072 081 120 164 127 CXC 043 DAEWOO 076 103 112 004 127 016 043 044 125 120 DAYTRON 004 127 DELL 041 DENON 011 DUMONT 004 073 DWIN 131 132 161 DYNASTY 043

Set-up Code Tables

MAKER(BRAND) NAME

CODE No

CONVERTER

CABLE TV

SCIENTIFIC ATLANTA EXPLORER Series 001

8600X 011 8600 021 8540,8570,8590 022

8500 023 MOTOROLA DCT Series (DVR Model) 002 GENERAL INSTRUMENT VIP Series 053 JERROLD DCT Series,CFT2200 008

BMC9012/BMC9022 006

DSR470 005

CFT2000 012

DRZ 024

DL4,DP(V),DQN(V),DPBB 025

DRX 002

Some Model 048 ADB ADB Series 054 AMINO AmiNET Series 049 AT&T U-VERSE 051 HAMLIN CR6000 042

CR6600,6800,CR83 043

CRX5000 044 MOXI MOXI MEDIA CENTER 006

MOXI HD DVR 052 MYRIO Evo Series 054 NSC IM781R 046

IM781 047 OAK SIGMAONE, P1,P2,P3, SIGMA 2000 037

RTC56,RKDM 038

SIGMA 2001,2002 039

SIGMA 450,500,550 040 PACE 510 004 PANASONIC 140,145,170,175 030

110,120,130,150,160 031 PIONEER VOYAGER Series 001

BA9000 013

BA4100,4200,4500 028

BA-V1000 029 REGENCY ALL MODELS 045 SONY DHG-M55CV 003 TOCOM 5507 035

5503A 036 WEGENER SMD 515 050 ZENITH MN2500 032

PM 033

Z-TAC 034

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

KENWOOD 070 001 KLEGG 220 KLOSS 002 059 KREISEN 202 KTV 070 043 154 127 LG 004 106 112 127 LODGENET 072 LOEWE 196 164 LOGIK 072 LUXMAN 004 LXI 007 015 052 081 160 164 MAGNAVOX 070 003 004 022 059 060 061 063 064 127 164 094

160 056 028 035 211 205 218 050 138 MAJESTIC 072 MARANTZ 164 070 MATSUI 164 MATSUSHITA 080 MAXENT 165 MEGATRON 004 MEMOREX 004 007 072 028 096 METZ 088 MGA 024 070 004 042 MIDLAND 073 MINERVA 088 MINTEK 077 MINUTZ 008 MITSUBISHI 109 024 042 004 040 146 028 124 081 200 MOTOROLA 081 MTC 070 004 062 101 MULTITECH 043 NAD 015 025 NEC 070 130 134 040 056 007 019 024 004 182 140 NIKEI 043 NIKKO 103 NIKO 175 NORCENT 211 NTC 103 OLEVIA 219 004 161 144 160 ONKING 043 ONWA 043 OPTIMUS 080 OPTOMA 029 032

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

DYNATECH 062 FISHER 007 057 ELECTROBAND 001 ELECTROHOME 024 076 127 ELEMENT 004 110 EMERSON 005 028 043 048 076 096 155 004 051 151 153 154

127 121 ENVISION 070 EPSON 087 ESA 031 FUJITSU 164 197 028 157 149 066 217 FUNAI 028 043 052 168 FUTURETECH 043 GATEWAY 165 031 GE 070 073 130 144 160 161 004 008 009 034 056 074

091 155 081 120 GEM 031 GIBRALTER 004 073 GOLDSTAR 004 106 112 127 GRUNPY 028 043 HAIER 004 116 HALL MARK 004 HANNSPREE 099 HARLEY DAVIDSON

028 HARMAN KARDON

164 HARVARD 043 HISENSE 198 021 HITACHI 004 007 009 011 072 010 012 023 075 158 127 HP 027 039 098 HUMAX 122 HYUNDAI 049 067 ILO 055 INFINITY 164 INFOCUS 046 215 225 INKEL 129 INSIGNIA 068 069 078 096 164 168 INTEQ 073 JBL 164 JCB 001 JCPENNEY 004 008 024 030 065 070 101 160 156 127 JENSEN 013 JVC 038 001 034 083 195 159 227

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

SSS 004 043 STARLITE 043 SUPRE MACY 002 SUPREME 001 SVA 046 SYLVANIA 070 003 059 060 063 064 127 160 164 044 056 168

121 SYMPHONIC 052 168 SYNTAX OLEVIA 219 004 161 144 160 TANDY 081 TATUNG 056 062 TECHNICS 034 080 TECHNOL ACE 028 TECHVIEW 246 TECHWOOD 004 TEKNIKA 002 003 004 024 028 043 072 101 103 164 127 TELERENT 072 TERA 172 THOMPSON 166 TNCI 073 TMK 004 TOSHIBA 015 030 007 040 062 101 142 045 137 TOTEVISION 127 TRUTECH 212 UNIVERSAL 008 009 VIDEO CONCEPTS 146 VIDIKRON 188 164 182 VIDTECH 004 VIEWSONIC 210 211 VIORE 055 VISCO 110 VIZIO 004 031 WARDS 004 064 164 008 009 019 028 060 061 063 072 074

070 127 WESTINGHOUSE 076 036 221 222 001 WINBOOK 079 YAMAHA 004 070 206 207 YORK 004 YUPITERU 043 ZENITH 011 072 073 095 103 096 ZONDA 112

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

OPTONICA 019 081 ORION 096 201 203 204 205 028 PANASONIC 034 056 080 164 190 230 248 PHILCO 070 003 004 024 056 059 060 063 064 127 164 PHILIPS 164 005 038 093 127 070 003 004 059 199 218 161 PIONEER 023 025 135 176 004 018 070 183 191 208 214 182 POLAROID 026 118 119 006 PORTLAND 004 103 127 PRISM 034 PROSCAN 144 160 161 167 PROTON 004 058 171 173 193 127 PROTRON 102 213 004 115 PROVIEW 110 QUASAR 034 056 RADIO SHACK 004 019 127 043 RCA 160 161 144 156 065 070 004 023 024 056 074 152

081 REALISTIC 007 019 REVOLUTION HD 220 RUNCO 072 073 130 179 180 181 182 216 194 SAMPO 070 004 058 165 SAMSUNG 004 101 127 133 160 089 105 070 184 185 192 SANSEI 120 SANSUI 096 SANYO 007 053 057 082 020 SCEPTRE 036 SCOTCH 004 SCOTT 004 005 028 043 048 127 113 SEARS 004 007 015 028 030 057 082 094 160 052 164 127 SELECO 189 SEMIVOX 043 SEMP 015 SHARP 081 014 019 028 004 022 127 SHERWOOD 128 SIGNATURE 072 SOLE 177 178 SONY 001 085 126 139 SOUNDESIGN 003 004 028 043 SOYO 163 SPECTRICON 112 SPECTRONIQ 004 SQUAREVIEW 052

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

DVD - VCR & TV/VCR Combo

HITACHI 013 026 034 063 137 047 156 031 HQ 034 HUGHES 013 INSTANTREPLAY 031 JCL 031 JCPENNEY 012 013 040 101 156 066 031 234 JENSEN 043 JVC 048 050 043 130 060 012 031 047 055 158 KEC 101 117 KENWOOD 014 034 047 048 023 KLH 024 KODAK 031 101 LG 101 123 012 013 114 LLOYD 034 LOGIK 024 LXI 034 003 009 017 101 MAGIN 040 MAGNASONIC 117 MAGNAVOX 067 031 034 041 068 154 160 MARANTZ 067 069 031 012 023 MARTA 101 MATSUI 027 030 MATSUSHITA 031 MEI 031 MEMOREX 101 003 010 014 031 034 053 072 139 134 234 025

040 MGA 045 046 059 040 MGN TECHNOLOGY

040 MINOLTA 013 156 MITSUBISHI 059 061 046 051 142 013 045 162 232 053 MOTOROLA 031 053 MTC 034 040 MULTITECH 024 034 NEC 012 023 043 048 039 NIKKO 101 NOBLEX 040 NORDMENDE 043 OLYMPUS 031 OPTIMUS 053 101 OPTONICA 053 054 ORION 153 231 025 PANASONIC 070 133 031 066 160 161 234

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

DVD - VCR & TV/VCR Combo

ADMIRAL 025 053 AIKO 117 AIWA 034 101 163 AKAI 016 043 046 124 142 146 AMERICA ACTION 117 AMERICAN HIGH 031 AMPRO 072 ANAM 031 ASHA 040 AUDIO DYNAMICS 012 023 039 043 AUDIOVOX 101 BEAUMARK 040 BROKSONIC 035 037 044 046 153 231 025 CALIX 101 CANON 028 031 CAPEHART 108 CCE 024 117 CINERAL 117 CITIZEN 101 117 COLT 024 CRAIG 003 040 022 024 101 CURTIS MATHES 031 041 156 CYBERNEX 040 DAEWOO 117 005 116 007 010 108 110 017 DAYTRON 108 DIMENSIA 156 DBX 012 023 039 043 DYNATECH 034 053 ELECTROHOME 059 101 ELECTROPHONIC 101 EMERSON 006 035 025 027 034 036 037 046 101 131 138 017

231 031 044 037 153 157 231 117 FISHER 003 008 009 010 FUJI 031 FUNAI 034 GARRARD 034 GE 031 072 144 147 063 107 109 156 232 233 040 053 GO VIDEO 040 132 136 GOLDSTAR 101 123 012 013 114 HARLEY DAVIDSON

034 HARMAN KARDON

012 045 HARWOOD 024

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

DVD - VCR & TV/VCR Combo

TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH

012 VIDEO CONCEPTS 012 046 034 141 VIDEOSONIC 040 WARDS 003 013 024 031 034 040 053 054 017 131 WESTING HOUSE 024 025 XR-1000 024 031 034 YAMAHA 012 043 034 039 ZENITH 072 080 001 048 034 101 058 025

*Note : For TV/VCR & TV/DVD combination units,

Please use following steps to operate the volume control.

STEP1 Press the [CBL] button and the [OK/SEL] button

simultaneously for 3 seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP2 Press the [VOL+] button.

STEP3 Press the [DVD] button. The CBL device LED will

blink twice to confirm the programming.

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

DVD - VCR & TV/VCR Combo

PENTAX 013 031 063 156 PHILCO 031 034 067 025 PHILIPS 031 067 034 101 054 071 PILOT 101 PIONEER 021 013 048 PORTLAND 108 PROFITRONIC 040 PROTEC 024 QUARTZ 002 014 QUASAR 070 133 161 031 066 160 234 RADIO SHACK 123 034 RADIX 101 RANDEX 101 RCA 107 109 144 147 013 041 034 040 156 031 140 232

233 053 REALISTIC 003 008 010 014 031 034 040 053 054 101 RICO 058 078 SALORA 014 SAMSUNG 040 032 107 109 017 113 115 124 122 159 SANKY 053 SANSUI 043 048 022 034 153 025 SANYO 003 010 007 014 134 040 SCOTT 037 044 046 131 017 159 SEARS 003 008 009 010 013 014 017 081 101 031 034 SHARP 031 054 053 143 SHINTOM 024 SHOGUN 040 SIGNATURE 034 SINGER 024 SONY 001 057 058 003 052 149 031 155 034 SOUNDESIGN 034 STS 013 SYLVANIA 031 059 034 067 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 023 TEAC 034 039 043 023 TECHNICS 031 070 TEKNIKA 031 019 034 101 THOMAS 034 TMK 006 040 TOSHIBA 017 008 131 047 059 082 013 042

1918

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

DVD - DVD & TV/DVD Combo

MERIDIAN 200 MINTEK 240 196 MITSUBISHI 186 MYRYAD 211 NAD 198 182 ONKYO 207 236 OPTIMUS 187 ORITRON 243 PANASONIC 076 173 184 219 192 PARASOUND 083 PHILIPS 074 164 176 177 191 195 209 PIONEER 175 180 187 221 223 POLAROID 075 084 085 PRIMARE 250 251 PROCEED 172 PROSCAN 188 189 RCA 188 189 086 SANSUI 201 SANYO 215 SAMSUNG 183 193 228 205 073 152 241 SENSORY SCIENCE

254 255 SHARP 174 SHERWOOD 083 SONY 077 168 190 213 SPECTRONIQ 088 SUPERSCAN 235 SV2000 235 SYLVANIA 235 SYMPHONIC 235 TAG McLaren 202 TECHNICS 173 THETA DIGITAL 187 TOSHIBA 169 171 191 206 227 201 236 TRUTECH 151 VENTURER 229 VINC 220 087 YAMAHA 199 204 246 184 192 ZENITH 182 194

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

DVD - DVD & TV/DVD Combo

ADCOM 203 AIWA 210 214 AKAI 239 ALPINE 179 APEX DIGITAL 240 197 247 248 196 ARCAM 165 148 AUDIOVOX 075 BOSE 244 245 CAMBRIDGE AUDIO

224

CARY AUDIO DESIGN

249 149 CLASSE 242 COBY 206 CYBERHOME 170 212 DAEWOO 170 DENON 184 226 225 DURABRAND 235 EMERSON 235 ESA 235 FUNAI 235 GE 188 189 GOLDSTAR 182 194 GO VIDEO 228 182 252 253 254 GRADIENTE 243 HARMAN KARDON 217 HITACHI 181 HITEKER 197 INSIGNIA 078 235 085 182 INTEGRA 208 236 238 JVC 185 KENWOOD 166 KISS 237 KLH 230 KOSS 243 KRELL 218 LEXICON 216 LG 182 194 LITEON 150 MAGNAVOX 178 191 195 235 MARANTZ 176 177 MCINTOSH 167 MEMOREX 222

2120

OCE-0009D Rev 02

Universal Remote Control UR3-SR3, OCE-0009D User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual