Universal Remote Control TRF-UZ1 Owner's Manual
TRF-UZ1 Z Extender
Owner’s Manual
TRF-UZ1 Z EXTENDER
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
TRF-UZ1 Z Extender Owner's Manual © 2012 Universal Remote Control, Inc.
The information in this manual is copyright protected. No part of this manual may be
copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this manual may be subject to change without prior notice.
URC - Control the Experience is a registered trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.
TRF-UZ1 Z EXTENDER
Congratulations! 1
Features and Benefits 1
Parts Guide 1
TRF-UZ1 Panel Descriptions 2
Specifications 3
USA Limited Warranty Statement 4
Federal Communication Commission
Interference Statement 6
Regulatory Information to the user 7
Delaration of Conformity 8
Page 1
TRF-UZ1 Z EXTENDER
Congratulations!
Thank you for purchasing the Total Control TRF-UZ1 Z Extender for
use with an MRX Advanced Network System Controller. This device
allows for optimal placement of the system’s RF antenna, allowing
for more robust coverage in all corners of the home or small office
space. Designed to work on URC’s 2.4GHz wireless network, this
compact device works with other devices that use the same network
protocol, like the MRX-10 Controller, TRC-780 Remote and the
THZ-100 Thermostat.
Features and Benefits
l
Replaces the internal antenna on the MRX-10 to allow for
optimal placement and communication, through the wired
network, between devices operating on URC’s 2.4GHz
network.
Using the optional TRF-UZ1 Z disables the internal antenna on
the MRX-10 and uses its own internal antenna as the new
“point of origin” for the RF signal. This feature provides an
abundance of placement options, minimizes the need for ZR
series repeaters, and ensures a robust signal to auxiliary devices.
l
Adds a 2.4GHz network antenna to the MRX-20 Advanced
Network System Controller
Without an included 2.4GHz antenna, the MRX-20 requires
the use of the TRF-UZ1 Z to enable communication, over the
2.4GHz network, to compatible devices (TRC-780, THZ-100,
etc.). Using this external antenna allows for optimal placement
in the home or small office space.
l
Compact design for easy installation
Easily and discretely install the TRF-GE1 Extender. Maintain
your home decor while controlling your Total Control MRX
Advanced Network System Controller.
Parts Guide
The TRF-UZ1 Z Extender includes:
1 - TRF-UZ1 Z Extender 1 - Owner’s Manual
TRF-UZ1 Panel Descriptions
The front, rear and bottom panel consists of:
Power LED: When illuminated this light indicates the TRF-UZ1 is ON.
Status LED: The Status LED signifies when the TRF-UZ1 is connected
to the network:
l
Connected: Illuminates green.
l
Not Connected: Remains OFF.
l Pairing: Illuminates orange.
Data LED: The Data LED flashes as the TRF-UZ1 receives and
transmits data.
DC 12V (1A): Plug in the included AC/DC adapter to power up the
TRF-UZ1.
LAN: Communicate over the network to an MRX-10/20 using an
Ethernet cable.
Reset: Pressing the Reset button, with a stylus or paper clip, refreshes
the TRF-UZ1. Unplugging and re-plugging the power cable also
resets the unit.
Pressing and holding the Reset button for 10 seconds, factory defaults
the TRF-UZ1 and places the unit back to its original factory condition.
Page 2
TRF-UZ1 Z EXTENDER
POWER
LED
STATUS
LED
DATA
LED
DC 12V
LAN
Reset
Loading...