Universal Enterprise RLD15 Installation Manual

INSTRUCTION MAN UAL

L

ow

B

attery

LO NORM HI

Certified J2791

Mute

Sens.

R

LD15

Display # Leak Size

(oz/yr)
1-3 < 0.1
4-6 0.1 to 0.5

7-9 > 0.5

8

L

E

A

K

S

I

Z

E

REFRIGERANT DETECTOR

™

3/8” or Less

AA

AA

AA

AA

L

ow

B

attery

LO NORM HI

Certified J2791

8

L

E

A

K

S

I

Z

E

Low

Battery

Mute

Sens.

8

L

E

A

K

S

I

Z

E

Mute

Sens.

8

L

E

A

K

S

I

Z

E

LO NORM HI

Mute

Sens.

D

isplay # Leak Size

8

L

E

A

K

S

I

Z

E

L

E

A

K

S

I

Z

E

LO NORM HI

L

E

A

K

S

I

Z

E

Replace w/
New Filter

Remove
O

ld (Dirty) Filter

U

nscrew

Sensor Tip

Unscrew
Sensor Tip

F

ilter

P

ull Straight Apart

DO NOT TWIST!

1.)

2.)

S

crew On

S

ensor Tip

Filter

Push Straight Together

DO NOT TWIST!

DO NOT

T

W

IST

!

A

lign New Sensor With Tip

And Push Straight On.

RLD15

FEATURES

LEAK SIZE INDICATOR

he digital leak size indicator remains off

T
until a leak is detected, a number from 1 - 9
will be displayed for all HFC and HCFC refriger­ants.

Regardless of the sensitivity settings.

: Refrigerant Leak Detector

AGENT

The number will increase or decrease
depending on the amount of refrigerant
sensed. The maximum value will be displayed
once the leak source has been located.

FILTER REPLACEMENT

1. Replace Filter: Unscrew sensor tip as

hown to replace filter. Replace filter

s
whenever it becomes visibly dirty or every
2 to 3 months depending on use.

1-800-547-5740 • Fax: [phone]

www.ueitest.com

email: info@ueitest.c

INTRODUCTION

The AGENT RLD15 features a long life
heated sensor technology that is designed to
detect the more current and difficult HFC
refrigerants such as R134a, R410A, R404A,
R407C, in additiion to all HCFC (R22) and CFC
(R12) refrigerants including SNAP approved
hydrocarbon blends.

GETTING STARTED

1. TURN ON:

Press
Power Button

2. WARM UP:

Allow 20 sec.
to warm up.

(Indicator will
blink and alarm
will beep)

3. READY:

When the flashing
“8” stops and the
green sensitivity
indicator LED
turns on

LEAK TEST VIAL

The Leak detector comes with a Leak Test
Vial that allows the user to make sure the
detector is performing properly. To test: Turn
the detector on and allow the unit to warm-up.

1. Remove Seal Cap

The beep rate should

3.
increase and the Digital
Leak Size Indicator
should display a number
from 4 - 6 indicating that
the sensor and electron­ics are working properly

4. Replace Seal Cap

replace plastic seal cap after leak
test is completed. Replace Test
Vial when the blue color is no
longer visible.

NOTE: Always remember to

2. Place Sensor tip close to
open vile.

Approximate Size Indications

Maximum # Displayed

1-3
4-6
7-9

Leak Size (oz/yr)

< 0.1

0.1 - 0.5
> 0.5

1.) Remove sensor by unscrewing sensor tip

nd pulling out the socket.

a

AUDIO MUTE FUNCTION

SENSOR REPLACEMENT

2.) Install the new sensor by aligning the mark
on the sensor cover with that on the probe and
pressing together.

om

ress Mute

1.P

Button to
Mute Speaker.

SENSITIVITY LEVEL

1. Press Sens.

utton to

B
Change / Scroll
Sensitivity
Levels.
(Indicated
By LED)

LOW BATTERY INDICATOR

Replace batteries when flashing

BATTERY REPLACEMENT:

1. Remove battery cover on back of

instrument. (Fig1)

2. Replace batteries (4 AA) with correct

polarity.

Misalignment can damage the sensor pins.

WARNING

FORCE

OR

DO NOT

SENSOR INTO THE SOCKET.

TWIST

THE

(Fig1)

SPECIFICATIONS

Model #

Name

Sensitivity

Sensor Life

Response Time

Power Supply

Battery Life

LIMITED WARRANT Y

RLD15

The AGENT is warranted to be free from defects in
materials and workmanship for a period of three years
from the date of purchase. If within the warranty period
your instrument should become inoperative from such
defects, the unit will be repaired or replaced at UEi’s
option. This warranty covers normal use and does not
cover damage which occurs in shipment or failure which
results from alteration, tampering, accident, misuse,
abuse, neglect or improper maintenance. Batteries and
consequential damage resulting from failed batteries are
not covered by warranty.

Any implied warranties, including but not limited
to implied warranties of merchantability and fitness for
a particular purpose, are limited to the express

. UEi shall not be liable for loss of use of the

warranty
instrument or other incidental or consequential dam
ages, expenses, or economic loss, or for any claim or
claims for such damage, expenses or economic loss.
A purchase receipt or other proof of original purchase
date will be required before warranty repairs will be
rendered. Instruments out of warranty will be repaired
(when repairable) for a service charge. Return the unit
postage paid and insured to:

-

Probe Length

Numerical Display

eight, lbs

W

arranty

W

Cross Sensitivity to Automotive Chemicals

Some Automotive solvents and chemicals
have similar hydrocarbon properties as R134a
and may elicit a positive response (< 30 seconds)
from the AGENT. Before leak detecting, clean
up any chemicals in the list below that elicit a
response.

Dextron Transmission Fluid heated to 160˚F

Quaker State motor oil heated to 160˚F

Rain-X Windshield wash fluid

Ford silicone lubricant

Ford Gasket adhesive (when wet)

Ford rust inhibitor (when wet)

Loctite Natural Blue Degreaser (undiluted)

Ford brake parts cleaner (when wet)
Ford silicone rubber (when uncured)
Motorcraft antifreeze heated to 160˚F

Gunk liquid wrench (when wet)

ime

arm-Up T

W

Ford spot remover (when wet)

UEi

PLEASE

8030 SW Nimbus A

Copyright © 2009 UEi RLD15-MAN 3/09

Beaverton, OR 97008

ve.

RECYCLE

Ford pumice lotion (with mineral solvent)

Ford motorcraft brake fluid

Ford carburetor cleaner (when wet)

RLD15

AGENT 1

.05 oz/yr R134a

.025 oz/yr R22

> 300 Hours

≤ 1sec

4 AA Alkaline

8 Hrs. Continuous

<20 Seconds

17 inches

7 Segment Digital (1-9)

1.5 Lbs

3yr (Includes Sensor)