Universal Enterprise ADM5201 User Manual

A

LL

T

HE

F

EATURES

N

EEDED

B

Y

T

ODAY'S

P

ROFESSIONAL

A

UTOMOTIVE

T

ECHNICIAN

ADM5201

Digital Multimeter

Includes 4 Testing Functions:

• O2 Sensor Test

• Ground Test

• Battery & Alternator Charging Test

• Battey Drain Test

Diagnose 1 to 12 Cylinder Engines

• Accurate RPM Measurements

• 4 Step Adjustable Triggers

ms-Pulse Width Tests

• PFI & TBI type fuel injector’s

• Idle air control motors

• Electronic transmission controls

Features Include:

• AC/DC Volts

• AC/DC Current

• Resistance

• Frequency

• Duty Cycle

• Direct DWELL

• Temperature

• RS232 serial port
and More!

The ADM5201
has the following features:

• Testing functions include: O2 Sensor Test, Ground Test, Battery and
Alternator Charging System Test, and Battery Drain Test

• Accurate RPM measurements for 2 and 4 stroke automotive engines with
1 to 12 cylinders using the inductive pickup

• ms-Pulse Width function to test on-time of both PFI type and TBI type
fuel injectors

• Duty Cycle and direct DWELL reading

• 4 step adjustable triggers on 1 to 12 cylinders

• Temperature measurement up to 2,372˚F or 1,300˚C

• 4-4/5 digit, 50,000 count primary and 9,999 count secondary dual
display with bar-graph (Frequency range: 99,999 counts)

• Backlit display

• RS-232C optically isolated serial port

• Memory store and recall (20 locations)

• Auto hold. 50ms high speed MIN/MAX/Avg, & relative mode

• 1ms Peak Mode

• Auto-power off

• High impact over-molded case

• CE-mark

• IEC 1010.1-92, CAT II 1000 V Rating

• Three year limited warranty

The ADM5201 advanced handheld automotive
multimeter combines all the features of a full function
multimeter and integrates the functions of an O2
Sensor tester, PFI & TBI Fuel Injection testers. The
ADM5201 provides a quick and accurate diagnosis of
the complete O2 circuit. It is also capable of sending a
Rich/Lean signal to the ECM, and displaying crossing­p e r -second (CC) and O2 voltage simultaneously, when
secondary display shows test results. This professional
grade multimeter provides efficient trouble shooting
solutions to the most difficult problems encountered in
t o d a y ’s sophisticated automotive electronic systems.

The ADM5201 has a bright LED backlight. A battery
access door allows users to replace the battery and
fuse without breaking calibration seals! High impact
o v e r -molded case absorbs shock over more of the
case than a conventional rubber boot design.
Convenient closed case calibration allows adjustments
to be made directly through the Optically-Isolated
RS232 serial port.

Copyright © 2006 UEi Automotive Specifications are subject to change without notice. L836 AUTO 3/06

ADM5201 • Digital Multimeter

Specifications

Distributed By:

1-800-547-5740 • Fax: [phone]
Service: [phone]
www.ueiautomotive.com
Email: [e-mail]

IN CANADA

Vancouver: Phone: [phone] • Fax: [phone]
Toronto: Phone: [phone] • Fax: [phone]

IN EUROPE

Phone: [phone] • Fax: [phone]

Annual calibration suggested.

DC Voltage: 0 to 1,000 V
AC Voltage: 0 to 1,000 V (40 Hz to 2 kHz)
Basic Accuracy: DC V – 0.1%, AC V – 0.5%
RPM (4 Stroke): 120 to 20,000 RPM
RPM (DIS & 2 Stroke): 60 to 10,000 RPM
DC Current: 0 to 10 A (20 A for 30 seconds)
AC Current: 0 to 10 A (20 A for 30 seconds)
Resistance: 0 to 50 M
Frequency: 0.5 Hz to 1 MHz
Duty Cycle: 0% to 99.9%
Dwell: 0° to 356.4°
Pulse Width: 0.50 ms to 250.00 ms
Diode Test: 3.0 V
Temperature: -58 to 2372 °F & -50 to 1300 °C

PLEASE

RECYCLE