Universal Electronics URC 7800 User Manual

Web Site : http://www.oneforall.com

URC 7800 Cinema 7+ User Guide

Previous Model Name: Cinema 7

OVERVIEW

Thank you for purchasing the One For All

Cinema 7+™

universal remote control with learning. Along with being a complete Home Theater universal remote, the Cinema 7+™’s sophisticated technology will allow you to finally consolidate the clutter of all of the original remotes in your home entertainment system. Through patented learning technology, you can teach your Cinema 7+™ the unique features of your original remotes and create the complete universal remote control – only from One For All.

Before you can use your new remote control, you will need to program it to operate the specific home entertainment components you wish to control. Follow the instructions detailed in this manual to set up your Cinema 7+™ and enjoy your new remote control.

Web Site : http://www.oneforall.com Web Site : http://www.oneforall.com

CONTENTS

OVERVIEW ............................................................................3

FEATURES AND FUNCTIONS ..............................................4

INST ALLING THE BATTERIES ..............................................8

SETTING UP YOUR COMPONENTS....................................8

Programming the Cinema 7+™ to operate your TV ..........8

Setup Codes For TVs ....................................................9

Programming the Cinema 7 to operate your VCR............11

Setup Codes For VCRs................................................11

Programming the Cinema 7 to operate your

TV/VCR Combo................................................................13

Setup Codes For TV/VCR Combos..............................14

Programming the Cinema 7 to operate your DVD or

Laser Disc Player..........................................................15

Setup Codes for DVD Players ......................................15

Setup Codes for Laser Disc Players ............................15

Programming the Cinema 7+™ to operate ..........................

your Receiver/Tuner..........................................................16

Setup Codes For Receivers/Tuner................................16

Programming the Cinema 7+™ to operate your CD Player.17

Setup Codes For CD Players ......................................18

Programming the Cinema 7+™ to operate your

Cable Converter or Satellite..........................................18

Setup Codes for Cable Converters ..............................19

Setup Codes for Satellites............................................20

Programming the AUX Key ..............................................21

Setup Codes For Integrated Amplifiers, etc.................21

SEARCHING FOR YOUR CODE..........................................22

RETRIEVING THE CODES PROGRAMMED

INTO THE Cinema 7+™ ..................................................22

LEARNING FUNCTIONS ONTO THE 1L~4L KEYS ..........23

Deleting Functions from the L Keys..................................24

SETTING UP OTHER COMPONENTS................................24

Setup Codes For Audio Cassettes ..............................25

Setup Codes For IR Home Automation........................25

Setup Codes For MiniDisc............................................25

Setup Codes For Video Accessories............................25

Setup Codes For Miscellaneous Audio........................25

RE-ASSIGNING DEVICE KEYS ..........................................26

PROGRAMMING THE MACRO KEYS ................................27

VOLUME LOCK ..................................................................28

USING THE SLEEP KEY......................................................29

TROUBLE SHOOTING ........................................................30

ONE FOR ALL® PRODUCTS Limited Warranty ..................32

Web Site : http://www.oneforall.com

FEATURES AND FUNCTIONS

The illustration below and the chart on the next three pages describe the features and functions of the Cinema 7+™ universal remote control. Use the drawing to locate each feature of the remote, then refer to the chart for a description of what function each feature performs.

FEATURE - FUNCTION

The Light (LED) flashes red to show that the remote is working and is sending a signal.

The SETUP key is used to program your Cinema 7+™.

The POWER key controls power ON and OFF the same as the POWER key on your original remote. Please note that most CD Players do not have an ON/OFF function on the original remote control. If this is the case with your CD Player, then POWER will have no effect on your CD Player.

The TV, VCR, DVD/LD, RCVR, AUX, CD and CBL/SAT keys are used to select the home entertainment component you want to control.If your component does not respond when you press a key on the remote control, press the appropriate device key (TV, VCR, DVD/LD, RCVR, AUX, CD or CBL/ SAT) first to tell the remote control which component you would like the remote to operate.

The VOL (Volume Up), VOL (Volume Down) and MUTE keys control the volume the same as the Volume Up and Down and Mute keys on your original remote.

The CH (Channel Up) and CH (Channel Down) keys change channels the same as the Channel Up and Down keys on your original remote.The CH / keys also control the following functions in other modes: DVD/LD mode = Skip Forward/ Skip Reverse, RCVR, AUX and CD mode = Preset Up/Preset Down.

The Digit keys (0-9) control direct channel access the same as the Digit keys on your original remote. The Digit keys (0-9) may also control the following functions in other modes: RCVR and AUX modes = Input Selections.

The ENTER key operates the same as the Enter key on your original remote. If your original remote control required you to use an Enter key to change channels, use the ENTER key on the Cinema 7+™ after entering your channel number.The ENTER key may also control the following functions in other modes: RCVR and AUX modes = TAPE MON.

The PREV CH (Previous Channel) key operates the same as the Last Channel or Recall key on your original remote.The PREV CH key may also control the following functions in other modes:DVD/LD, RCVR, AUX and CD mode = Random.

▲

The EXIT key exits or clears your on screen menus. The EXIT key may also control the following functions in other modes: RCVR, AUX and CD mode = Open/Close.

The PROG/GUIDE key operates your components secondary menus as well as your DBS system’s and Cable Converter’s Guide function.Use the , , and (Menu Up, Down, Left and Right) keys to navigate your menus.If your original remote control had a SELECT key to select options in your menus, use SEL. Use the EXIT key to exit/clear your OnScreen menus. Please consult your home entertainment component’s original owner’s manual for more detailed instructions on accessing and navigating your On-Screen menus.

The DISPLAY key operates the Display function of your home entertainment components.

The PIP On/Off key accesses your TV’s Picture-in- Picture feature.The PIP On/Off key may also control the following functions in other modes:CD mode =Disk Skip, D VD/LD mode = Subtitle On/Off, CBL/SAT mode = View.

The SWAP key swaps the Picture-in Picture window and the TV’s main picture.The SWAP key may also control the following functions in other modes: CBL/SAT mode = SAT.

The MOVE PIP key moves the Picture in-Picture window around your TV screen.The MOVE PIP key may also control the following functions in other modes: DVD/LD mode = Angle, CBL/SAT mode = Next.

The SURROUND key operates the same as the Surround On/Off key on your original remote.The SURROUND key may also control the following unctions in other modes: VCR mode = Auto Tracking, DVD/LD mode = Disc, CBL/SAT mode = Favorite Channel, CD mode = 10+.

The MACRO and MACRO2 keys can sequentially memorize up to 15 key strokes per key for access with a single key press.These keys are not mode specific. See page 27 for more details.

1L, 2L, 3L, and 4L are mode-specific learning keys that allow you to customize your Cinema 7+™ for unique functions not found on your new remote control.They will accept up to four new functions per device mode for a total of 28 new functions.See page 23 for addi-

The CH / , VOL / , MUTE, PREV CH and Digit (0-9) keys are made of a phosphorescent material that glows-in-the-dark. Expose the keys to bright light to activate the glow-in-the-dark feature. The length of time the keys remain illuminated will be determined by the length of time the remote is exposed to bright light.

The SLEEP key accesses the Sleep Timer of your home entertainment components (TV, CBL/SAT, RCVR and AUX modes only). Even if your component does not have a Sleep Timer, the Cinema 7+™ may access its own built-in sleep timer. See page 29 for additional information.

The REW (Rewind), PL (PLAY), FF (Fast Forward) REC (Record), STOP, and PAUSE keys operate the same as the transport keys on your original VCR, Laser Disc, DVD and CD Player remote.As a safety feature of the Cinema 7+™, you must press the REC key twice before recording.

The TV/VCR key operates the same as the TV/VCR key on your original VCR remote.The TV/VCR key may also control the following functions in other modes: TV mode = TV/VIDEO, CBL/SAT mode = A/B or TV/SAT, DVD/LD mode = TV/LD, RCVR mode = Input Select, CD mode = A/B.

The MENU key operates the same as the MENU or OSD (On Screen Display) key on your original remote. Use , , and (Menu Up, Down, Left and Right) to navigate your menus.If your original remote control had a SELECT key to select options in your menus, use SEL.Use the EXIT key to exit/clear your On-Screen menus.Please consult your home entertainment component’s original owner’s manual for more detailed instructions on using On-Screen menus.

The , , and (Menu Up, Down, Left and Right) keys are used to navigate your On-Screen menus.The , , and keys may also control the following functions in other modes:RCVR

and AUX mode = Rear Level +/- and Balance

Left/Right, CD mode = Track +/- and Disc +/-. The SEL (Select) key selects options in your On-

Screen menus.The SEL key may also control the following functions in other modes:RCVR and AUX mode = Surround Mode, CD mode = Disc Select, DVD/LD mode = Chapter.

Web Site : http://www.oneforall.com Web Site : http://www.oneforall.com

▲

Web Site : http://www.oneforall.com

POWER.The TV should turn off.If it does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your TV.

NOTE: If you have tried all the codes listed for your brand and your TV does not respond, try using the search method found on page 22.

5. Your Cinema 7+™ is now programmed to operate your TV.Write your TV code in the boxes to the left for future reference.

Remember, if you want to use your Cinema 7+™ to operate your TV, press the TV key first.

Setup Codes For TVs

Admiral 0093, 0179, 0180, 0016, 0047 Aiko 0092 Akai 0030 Alaron 0179 Ambassador 0177 Ampro 0751 Anam 0180 AOC 0019, 0185, 0003 Audiovox 0451, 0092, 0180, 0003 Baysonic 0180 Beaumark 0017, 0030, 0179 Belcor 0019 Bell & Howell 0154, 0016 Bradford 0180 Brockwood 0019 Candle 0056, 0030 Carnivale 0030 Carver 0054 Celebrity 0000 Cineral 0451, 0092 Citizen 0060, 0092, 0030, 0056, 0039 Clairtone 0185 Concerto 0056 Contec 0180, 0185 Craig 0180 Crown 0180, 0039 Curtis Mathes 0030, 0060, 0154, 0039, 0466, 1147, 1347 CXC 0180 Daewoo 0451, 0092, 0019, 0039, 0624 Daytron 0019 Denon 0145 Dumont 0017, 0019 Dwin 0720, 0774 Electroband 0000, 0185 Emerson 0463, 0236, 0180, 0019, 0154, 0177, 0178, 0179, 0185,

0282, 0039, 0624 Envision 0030 Fisher 0154, 0159 Fujitsu 0179 Funai 0171, 0179, 0180 Futuretech 0180 GE 0047, 0051, 0451, 0021, 0178, 0282, 0135, 1147, 1347 Gibralter 0019, 0030, 0017 Goldstar 0019, 0030, 0178, 0039 Gradiente 0053, 0056 Grunpy 0179, 0180 Hallmark 0178 Harvard 0180 Hitachi 0145, 0151, 0056 Infinity 0054 JBL 0054 JCB 0000

tional details.

INST ALLING THE BATTERIES

Your Cinema 7+™ requires four (4) new AAA alkaline batter- ies.To install the batteries:

1. On the back of the Cinema 7+™, pull back on the tab and lift the battery cover off.

2. Match the + and - marks on the batteries to the + and - marks in the battery case, then insert the batteries.

3. Press the battery cover back into place.

4. Test the unit by pressing POWER. If the batteries are inserted correctly, the red light will blink.

NOTE:Removing the batteries will not require you to reprogram your remote control because the Cinema 7+™ has unlimited memory backup.

SETTING UP YOUR COMPONENTS

Programming the Cinema 7+™ to operate your TV:

NOTE: If you are trying to program a TV/VCR combination, do not perform these instructions. Instead, follow the steps in “Programming the Cinema 7+™ to operate your TV/VCR Combo”starting on page 13.

Locate the brand name of your TV in the “Setup Codes For TVs” section (starting on the next page), and write it in the space below.

TV Brand: ________________________________ The brands are listed in alphabetical order with the most

popular codes listed first.You will use one of these codes to program your Cinema 7+™ to operate your TV as follows:

1. Tur n on your TV.

2. On the Cinema 7+™, press TV and release. Press

and hold SETUP until the red light blinks twice, then release SETUP.

3. Enter the first four-digit TV code listed for your

brand. If performed correctly, the red light will blink twice when you enter the final digit.

4. Aim the Cinema 7+™ at your TV and press

Teknika 0054, 0056, 0060, 0092, 0150, 0016, 0019, 0179, 0180,

0039 Telefunken 0056 TMK 0056, 0177, 0178 Toshiba 0156, 0060, 0154

Setup Codes For TVs (continued)

Tosonic 0185 Totevision 0039 Vector Research 0030 Victor 0053 Vidikron 0054 Vidtech 0019, 0178 Viking 0046 Wards 0016, 0019, 0030, 0054, 0056, 0096, 0165, 0178, 0179,

0021 White

Westinghouse 0451, 0463, 0236, 0180, 0624 Yamaha 0019, 0030 Zenith 0017, 0092, 0016

Programming the Cinema 7+™ to operate your VCR:

Locate the brand name of your VCR in the “Setup Codes For VCRs” section (starting below), and write it in the space below .

VCR Brand: ______________________________ The brands are listed in alphabetical order with the most pop-

ular codes listed first.You will use one of these codes to program your Cinema 7+™ to operate your VCR as folllows:

1. Tur n on your VCR and play a tape.

2. On the Cinema 7+™, press VCR and release. Press

and hold SETUP until the red light blinks twice, then release SETUP.

3. Enter the first four-digit VCR code listed for your

brand. If you perform this procedure correctly, the red light will blink twice when entering the final digit.

4. Aim the Cinema 7+™ at your VCR and press

POWER.Your VCR should turn off.If your original VCR remote control did not have a POWER key, press STOP. Your VCR should stop.If your VCR does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your VCR.

NOTE: If you have tried all the codes listed for your brand and your VCR does not respond, try using the search method found on page 22.

5. Your Cinema 7+™ is now programmed to operate

your VCR.Write your VCR code in the boxes to the left for future reference.

Remember, if you want to use your Cinema 7+™ to operate your VCR, press the VCR key first.

Setup Codes For VCRs

Admiral 0048, 0121, 0184, 0039, 0060, 0202 Adventura 0000 Aiko 0278 Aiwa 0037, 0000 Akai 0041 American High 0035 Asha 0240

JVC 0053 KEC 0180 Kenwood 0019, 0030 Kloss 0024 KTV 0030, 0180, 0185, 0032

Setup Codes For TVs (continued)

LG 0056 Logik 0016 Luxman 0056 LXI 0047, 0054, 0154, 0156, 0178 Magnasonic 0179, 0030, 0092, 0093, 0019, 0003, 0054, 0156 Magnavox 0054, 0096, 0187, 0030, 0179, 0171 Majestic 0016 Marantz 0054, 0030 Matsushita 0250 Megatron 0145, 0178 MEI 0185 Memorex 0056, 0150, 0154, 0016, 0178 MGA 0150, 0019, 0030, 0178 Midland 0017, 0047, 0051, 0135, 0039 Minutz 0021 Mitsubishi 0150, 0093, 0019, 0178 Motorola 0093 MTC 0060, 0019, 0030, 0056, 0185 Multitech 0180 NAD 0156, 0166, 0178 NEC 0019, 0030, 0056 Nikko 0030, 0092, 0178 NTC 0092 Onwa 0180 Optimus 0250, 0154, 0166 Optonica 0093, 0165 Orion 0236, 0436 Panasonic 0250, 0051 Penney 0047, 0156, 0051, 0030, 0019, 0021, 0060, 0135, 0178,

0039, 1347 Philco 0054, 0145, 0096, 0019, 0030 Philips 0054 Pilot 0019, 0030, 0039 Pioneer 0166 Portland 0092, 0019, 0039 Prism 0051 Proscan 0047 Proton 0178, 0466 Pulsar 0017, 0019 Quasar 0250, 0051, 0165 RadioShack 0047, 0056, 0154, 0019, 0030, 0165, 0178, 0180, 0039 RCA 0047, 0019, 0090, 0135, 1047, 1147, 1247, 1347 Realistic 0056, 0154, 0019, 0030, 0165, 0178, 0180, 0039 Rhapsody 0185 Runco 0017, 0030, 0603 Sampo 0030, 0039 Samsung 0060, 0019, 0030, 0056, 0178, 0039 Samsux 0039 Sansei 0451 Sanyo 0154, 0159 Scimitsu 0019 Scotch 0178 Scott 0236, 0019, 0178, 0179, 0180 Sears 0047, 0054, 0056, 0154, 0156, 0171, 0178, 0159, 0179 Semivox 0180 Semp 0156 Sharp 0093, 0165, 0039 Shogun 0019 Signature 0016 Simpson 0187 Sony 0000 Soundesign 0178, 0179, 0180 Squareview 0171 SSS 0019, 0180 Starlite 0180 Supreme 0000 Sylvania 0054, 0096, 0030 Symphonic 0171 Tandy 0093 Technics 0250, 0051 Technol Ace 0179 Techwood 0051, 0056

1110

Web Site : http://www.oneforall.com Web Site : http://www.oneforall.com

+ 11 hidden pages