Universal Electronics Polaris 1090 User Manual

REMOTE&CONTROL&CODE&SEARCH&INSTRUCTIONS&

&

&
Following&are&instructions&on&how&to&program&your&remote&control&to&devices&other&than&your&set&top&
box&using&code&search.&You&can&also&attempt&to&find&the&code&for&the&device&you&want&to&program&at&

www.urcsupport.com&

&

&

Polaris&1090&

&

SETUP CONTROL USING CODE SEARCH

Follow the instructions below to set up the remote to control the specific device
you select.

1.

Press the TV POWER key.

2.

Press and hold SETUP until the TV POWER key blinks twice
then release.

3.

Type 9-9-1 on the number keys.

4.

Press CH+ repeatedly until the TV turns ON or OFF.

5.

Press SETUP key to save working code..

&
&
&
&

Atlas&DVR&1056&

SEARCHING FOR YOUR CODE

1. Turn on your TV.

2. On the remote control, press TV once; it blinks once. Then press and hold SET UP until the TV key blinks twice.

3. ENTER 9-9-1. The TV key blinks twice.

4. Press 1 (the device code digit for your TV). The TV key blinks twice. Aim the remote control at the TV and press PWR
once.

5. Press and release the CH+ key continuously, then stop when the TV turns off.
NOTE: In the search mode, the remote control sends IR codes from its library to the selected device, starting with the
most popular code first.